Classifieds: Mid East
97 GASE 2.4L. Lots of parts FOR SALE. Jus a few main ones...
-JBodyPerf race head kit( p/p heah, valve work, perf cams) [SOLD with cams]
-.020 over Wiesco pistons and eagle rods [pending]
-shorty header
-Magnaflow muffler (set up for hitch install)
-62mm TB w/ ported to mtch manifold - TB SOLD - still have manifold
-MSD coil converson - sold
-oil cooler - PENDING
-RSM upper motor mount insert
-RSM UD crank pully
-2001 starter (smaller then older 2.4L motors starter)
PICS will be up soon, or by request.
Ad Type:
For Sale
Email:
(email unlisted)
Location: western Maryland
Price:
Sites: j-body.org
Regions: Global, Mid East, North East
Dont mind the crappy welds... tryed repairing some cracks myself, rookie welder.car only starte once since, and sounded like there werent anymore leaks.
MSD coil converson kit. Plug and play. Plugs right into stock ICM.
62mm TB and RSM unper motor mount insert (installed in upper mount).
RKSport 2row oilcooler w/ filter atapter.
RSM UDcrank pully
Interested in the tb if other buyer doesn't come through.
I woukld love some more information on the head kit and a price.
The head kit is the JBodyPerformance.com race head kit for the 2.4L Twin Cam motors. I can not give full specs for it (as cfm, cc, flow, or cam specs), since i was in Iraq when the motor was put together and none of the data sheets were kept by the shop. I ordered as a whole kit, head,cams,pistons and rods, from them to match the 0.020 over pistons.
Here is the link to their current race head kit on their site
http://www.jbodyperformance.com/new/PartDetails.php?partId=646&catId=646&catName=JP0646
I read over it and it isnt really sprecific on the cams. I have always really wanted a set of their stage 2 cams. The head seems like a really nice piece.
Yea. Back then, the cams were part of the head kit, and they only had one level of cams.
The pully i could let go for 45 shipped
Im interested in the msd coil conversion you should pm me a price. Is is a noticable difference
The MSDkit is curretly pending a sale. The kit is not a big power adder or anything, but it does give you a better spark over stock. I noticed it smoothed idle out some, and felt better and a tad stronger thrugh out the RPM range.
Would you be interested in just selling the cams?
Yes. But the whole head kit is currently pending.
Ok cool
That doesn't look like an RSM crank pulley...
RSM crank pulleys are more flat. I honestly have never seen this one before.
Any more pics of the coil conversion?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I got the pully thru RSM. If they changed them up, not much i can do.
And what more do you need to see on the MDS kit?
Just was wondering on a close up of how you wired them in.
And how much are you selling them for?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Still interested in 62mm TB if you still have it
What all do you still have?
I Love My J ♡
First thread is up to date
What do you have and prices? Still have head set up or is it still pending
I Love My J ♡
What's the prce on the throttle body?
do you still have the head if so txt me at 336-213-6696 i am very interested in the head
how much pulley shiped to mexico'
MURCIELAGO 2.2 ECOTEC...(CAI WEAPON-R AND AEM, RSM/Z-Spec ligth pulleys, RK-S Headers, MAGNAFLOW SS 2.5" catback, REAR DISC brakes/SS lines, RALCO short Shift, RK-S eng. mounts, KYB AGX Shocks, Eibach Pro-Kit Springs, OPTIMA REDTOP)... J Body Member
How much on the head kit?
WHAT DO YOU MEAN I NEED TO TUNE MY CAR?
How much for the 62MM throttlebody...... im very interested
GOT STUFF FOR SALE, CHECK THE CLASSIFIED
The main post was last updated early February
How much for the pistons and rods?
Forum Post / Reply
You must log in before you can post or reply to messages.