bash dyno vids - Events Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
bash dyno vids
Wednesday, August 11, 2010 8:38 PM
my sedan on the dyno...
http://www.youtube.com/watch?v=C4S0KPKDvlY
http://www.youtube.com/watch?v=qmpWX1cejew

oldskool's 307 whp pull
http://www.youtube.com/watch?v=7j2fFT6t_pg

i'll post more as I get them uploaded... feel free to post any you may have gotten as well.




Re: bash dyno vids
Wednesday, August 11, 2010 9:52 PM
Re: bash dyno vids
Thursday, August 12, 2010 3:28 AM
Sweet, I did not have my camera with me at that point so I never got it on video.



FU Tuning



Re: bash dyno vids
Thursday, August 12, 2010 3:47 AM
wow some good vids and some really nice pulls






RIP JESSE GERARD.....Youll always be in my thoughts and prayers...



Re: bash dyno vids
Thursday, August 12, 2010 3:55 AM
We have to add 10% to all pulls to equal Dyno Jet numbers. I was even told 18% but I think that might be a little high.



FU Tuning



Re: bash dyno vids
Thursday, August 12, 2010 4:59 AM
Dangit.....makes me wish I would have dyno'ed That was a nice facility too.





Re: bash dyno vids
Thursday, August 12, 2010 5:24 AM
Yummy vids!

Screaming for Mercy!! wrote:

We have to add 10% to all pulls to equal Dyno Jet numbers. I was even told 18% but I think that might be a little high.
I would be happy with 307 on a dyno jet, but adding another 10% to that? 337-ish whp? That also means qwibby would be at 271whp on a stock block holy sh1t lol.



Re: bash dyno vids
Thursday, August 12, 2010 5:32 AM
oldskool (eco meatcake) wrote:

Yummy vids!

Screaming for Mercy!! wrote:

We have to add 10% to all pulls to equal Dyno Jet numbers. I was even told 18% but I think that might be a little high.
I would be happy with 307 on a dyno jet, but adding another 10% to that? 337-ish whp? That also means qwibby would be at 271whp on a stock block holy sh1t lol.


Yes, but I know it can handle it. Too bad we did not find out what 14psi would have made on a Ecotec that day.

I feel the 10% is right because I made 208whp on a dynojet in Fl this year with stock crank pulley. I'm now on a OS crank pulley and also more meth so adding 10% to my numbers would be 219.67whp.That is right around where I thought I would be on this setup.

Need to get my buddy's GXP on the dyno so we can compare to your numbers. I ran a 13.50 in it last year so should be close to your numbers.



FU Tuning



Re: bash dyno vids
Thursday, August 12, 2010 6:11 AM
Mmmm qwibby on 14psi - ::drool::

There are stock turbo'd kapps (and cobalts) in the high 12s, so i don't doubt it. They run slicks and know how to drive though lol i don't. Just having fun.



Re: bash dyno vids
Thursday, August 12, 2010 6:25 AM
Screaming for Mercy!! wrote:

oldskool (eco meatcake) wrote:

Yummy vids!

Screaming for Mercy!! wrote:

We have to add 10% to all pulls to equal Dyno Jet numbers. I was even told 18% but I think that might be a little high.
I would be happy with 307 on a dyno jet, but adding another 10% to that? 337-ish whp? That also means qwibby would be at 271whp on a stock block holy sh1t lol.


Yes, but I know it can handle it. Too bad we did not find out what 14psi would have made on a Ecotec that day.

I feel the 10% is right because I made 208whp on a dynojet in Fl this year with stock crank pulley. I'm now on a OS crank pulley and also more meth so adding 10% to my numbers would be 219.67whp.That is right around where I thought I would be on this setup.

Need to get my buddy's GXP on the dyno so we can compare to your numbers. I ran a 13.50 in it last year so should be close to your numbers.
The % difference all depends on weather conditions and how hard the dyno is "loaded".... Based on throwing multiple cars on our DD then on a Dyno Jet with no other changes at all, we found that ours reads 18% lower....





P&P Tuning
420.5whp / 359.8wtq

Re: bash dyno vids
Thursday, August 12, 2010 7:32 AM
oldskool (eco meatcake) wrote:

Mmmm qwibby on 14psi - ::drool::

There are stock turbo'd kapps (and cobalts) in the high 12s, so i don't doubt it. They run slicks and know how to drive though lol i don't. Just having fun.


I was talking about Roberts car. lol. It was not until the drive from the show to the hotel that we finally had the tune safe enough.



FU Tuning




Re: bash dyno vids
Thursday, August 12, 2010 8:23 AM
once i got my motor ready to go in I'll tune to 14 psi



LE61T PTE6262 Powered

Re: bash dyno vids
Thursday, August 12, 2010 9:03 AM
IamQwibby (Eco Meatcake) wrote:

once i got my motor ready to go in I'll tune to 14 psi


Why not 20??



FU Tuning



Re: bash dyno vids
Thursday, August 12, 2010 12:45 PM
Screaming for Mercy!! wrote:

IamQwibby (Eco Meatcake) wrote:

once i got my motor ready to go in I'll tune to 14 psi


Why not 20??
LOL... I remember when running anything over 8psi was BIG!





P&P Tuning
420.5whp / 359.8wtq

Re: bash dyno vids
Thursday, August 12, 2010 7:24 PM
Screaming for Mercy!! wrote:

IamQwibby (Eco Meatcake) wrote:

once i got my motor ready to go in I'll tune to 14 psi


Why not 20??


why not 46?



My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again
Re: bash dyno vids
Thursday, August 12, 2010 8:36 PM
Nice Videos! Excellent numbers btw
Re: bash dyno vids
Thursday, August 12, 2010 8:44 PM
Nice vids!






Supercharged 2002 Cavalier Z24
J-Body / GM TUNER Bash Veteran
Re: bash dyno vids
Friday, August 13, 2010 7:43 AM
Hey i will run 46psi just cuz . . . . he he he he

i would be scared if i were you

-Ben
Re: bash dyno vids
Friday, August 13, 2010 1:56 PM
RedCavalac wrote:

Dangit.....makes me wish I would have dyno'ed That was a nice facility too.


Hell, I am still impressed at your times at the track in SNOW TIRES!!!

QWK LN2 (needs an @ss whoopin) wrote:

Screaming for Mercy!! wrote:

IamQwibby (Eco Meatcake) wrote:

once i got my motor ready to go in I'll tune to 14 psi


Why not 20??
LOL... I remember when running anything over 8psi was BIG!


True, I remember those times.....now look how far we come




Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi

LG0/LD9 for Life
Re: bash dyno vids
Sunday, August 15, 2010 7:35 PM
Ben Wenzel Jr wrote:

Hey i will run 46psi just cuz . . . . he he he he

i would be scared if i were you

-Ben


Quiet yourself Wen Benzel. Or the Pedobear sticker will come back.



Re: bash dyno vids
Sunday, August 15, 2010 8:11 PM
Blwn LD9 wrote:

RedCavalac wrote:

Dangit.....makes me wish I would have dyno'ed That was a nice facility too.


Hell, I am still impressed at your times at the track in SNOW TIRES!!!


Thanks, getting the hookup on a set of slicks hopefully so no more snow tires lol.






Re: bash dyno vids
Sunday, August 15, 2010 8:56 PM
im done with dynos, only number I care about now is a 12



1989 Turbo Trans Am #82, 2007 Cobalt SS G85





Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search