97 z24 cavalier - Maintenance and Repair Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
97 z24 cavalier
Tuesday, April 23, 2013 7:59 PM
Hey guys. So my cavvy is dying randomly and throwing both p0335 and p0341 codes which are crankshaft position sensor and the crankshaft position sensor. Ive replaced both, neither helping. Any suggestions folks?




Re: 97 z24 cavalier
Wednesday, April 24, 2013 1:28 PM
Ok, so i meant p0341 refers to the camshaft position sensor and p0335 refers to the crankshaft position sensor. Pardon my inability to think and type coherently lol. About two years ago i replaced the ignition module and the ignition coil housing when attempting to fix a different problem with it dying randomly. As it is throwing codes, I doubt that it is a mechanical fuel problem such as fuel pump, filter, injectors, etc... I checked the spark plugs, and re-gapped them while i had them out, they looked fine. Any and all help would be greatly appreciated.



Re: 97 z24 cavalier
Thursday, April 25, 2013 4:12 PM
It also has hard starting problems. That particular problem started a few months ago and has progressivally gotten worse. The codes are also Intermittent. Any ideas?



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search