Anyone need 3rd Gen parts? - South Pacific Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Anyone need 3rd Gen parts?
Monday, May 23, 2005 7:28 PM
This weekend, I will be stripping down my 1998 Sunfire SE that I wrecked a while back. Everything except for the front bumper, driver door, driver fender, hood, front windshield and windows survived the accident. Including the standard 2.2L 4cyl engine which has around 58K miles on it, and the 5 speed manual transmission to match it. The only parts not for sale are the plastic pieces that cover the seat belt bolt, and the buckle for the driver side belt. Anyone who wants any parts either reply here, email me at remedy541@hotmail.com or call me at (541)771-1234. I'm at work all week until about 5:30 Pacific Standard Time, but if you leave me a message, I will return you're call as soon as I can. If calling, please note your location in the message, and latest time to call. Anyone who wants anything can either pick up the parts from me, or I will try to assist in arranging for shipment, buyer will be fully responsible for shipping & handling cost if necessary.

Thanks,
David

Re: Anyone need 3rd Gen parts?
Monday, May 23, 2005 7:41 PM
does the trunk lid have a spoiler? do you have any pictures of the car?




Re: Anyone need 3rd Gen parts?
Monday, May 23, 2005 7:52 PM
i got dibbs on the headlights. email me. thanx.



-Www.IznTrbl.Com-
Re: Anyone need 3rd Gen parts?
Monday, May 23, 2005 8:06 PM
I just received a call from someone quite a ways away, and thought I would add that I am in Bend, Oregon, which is pretty much the exact center of the state above California and below Washington.
Re: Anyone need 3rd Gen parts?
Sunday, May 29, 2005 11:24 PM
Hi,

Do you have a full cluster? I'm interested on it... in case it fits in a 96 Cavy (same specs)... I live in Lima, Peru, South America. Is it able to make the deal? TIA
Re: Anyone need 3rd Gen parts?
Monday, May 30, 2005 6:08 AM
I wish I knew if the 5 speed from that motor type would fit mine, I would be very interested in getting it if so, since my tranny is in pretty bad shape. Lemme do some different searches around the net to find out...forum search didn't help me much.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search