Utah club - Page 4 - South Mountain Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Utah club
Tuesday, February 11, 2003 8:06 PM
hey firewolf, where did you get your check valve for your turbo, and how did you set it up?

Re: Utah club
Tuesday, February 11, 2003 8:58 PM
Hey bobo who much did that guy charge you to weld your cat or who much would he charge.
Re: Utah club
Wednesday, February 12, 2003 9:50 AM
I ment how man i was tired
Re: Utah club
Wednesday, February 12, 2003 5:01 PM
Thanx Kace, man he quoted me like $1300 to start with for a turbo setup. What did he tell you guys???
Re: Utah club
Wednesday, February 12, 2003 6:17 PM
I dont know what kenny would charge but I will find out

I think cause I also bought tubing he didnt charge me for intalling the cat I bet like 5 maybe 10 bucks plus 7 if you want your sensor welded in.

next weekend when I get paid I am getting manifold to cat 2 1/4 tubing it will cost 45bucks

and hopefully enough money I might get my throttle body done
Re: Utah club
Wednesday, February 12, 2003 6:18 PM
oh and I dont think I will be out Friday the hole Valentines day thing ya know I might be busy but if not I will find you on channel 11
Re: Utah club
Wednesday, February 12, 2003 11:35 PM
Hey bobo you are going to what to flex pipe cens you don't have motor mount and your engine rocks bad it would just ruine the pipe.

by the way this is joe so i might have spelled things wrong but o well.
Re: Utah club
Thursday, February 13, 2003 3:57 PM
maybe since I need motor mounts I will get those and then I will finish my exhaust I dont know so I will see how things go
Re: Utah club
Thursday, February 13, 2003 6:40 PM
Bobo you can still get the piping just use a piece of flex some where between the manifold down pipe and the cat.
Im pretty sure that guy has one just tell he you need one put on.

But then again the mounts are good thing to have to help your low end.
Re: Utah club
Friday, February 14, 2003 9:37 AM
Yo Yo, long time no talk

I got so much work now that I can't ever meet or get on here too much.

Where are you guys getting all this work done for your cars for so cheap, geez?

Laters <br>
-vVvV-Play on Playa-VvVv-
Re: Utah club
Friday, February 14, 2003 5:06 PM
hey icedout,

where ya been man? get some time off, we all need to meet up.

hey ryan, are you going to be able to come down this weekend?

Re: Utah club
Friday, February 14, 2003 10:26 PM
i am soooooooooooooooooooooo pissed off last time wee were supost to meet my lazy @!#$ fell asleep so i am soo pissed
Sorry guys <br> Its Pronounced {TEAR I AL}
Re: Utah club
Friday, February 14, 2003 11:37 PM
Alright, I'll see what I can do.

Hey do any of you guys have an car audio hook ups?

I realllllllllllly want some w6v2's but I can't find anyone that can give me a sweet price. @!#$ I might result to anything at this point, so if anyone has a hook up or something, please holla back. <br>
-vVvV-Play on Playa-VvVv-
Re: Utah club
Sunday, February 16, 2003 5:47 PM
hey Kace I was just looking for tires for Tanshyles wheels they are 17-7.5 so should I get a 215/40/R17 or 225/40/R17 I am leaning toward the 225 because that is what mine is on a 7.5 wide wheel but my wheels are 18's let me know if we get 215 we will get kuhmo ecsta supra 712 but the 225 is nitto 555 extreme tell me what you would get or ask joe he is smart unless you guys have a different idea.
Re: Utah club
Sunday, February 16, 2003 8:21 PM
you would probley want to get 225/45/17 that way it wouldn't screw your speedo.
But the 225/40/17 probley wouldn't screw the speedo up to much just 2-3 mph I think but I don't know for sure.
Re: Utah club
Tuesday, February 18, 2003 12:24 PM
sorry i haven't posted, i haven't been able to get on, i had to install those springs.... i don't like the way they feel so i might buy the kyb shocks and eibach sportlines... it is true what they say, you pay for what you get. we should meet on sat i work on fri night and then sat until 4:30
Re: Utah club
Tuesday, February 18, 2003 8:01 PM
i am up for a meet i try to stay awake. <br> Its Pronounced {TEAR I AL}
Re: Utah club
Thursday, February 20, 2003 11:13 AM
Ryan, what springs/coilovers did you get? I have a set of sportlines coming. I hope it rides good on stock replacements. <br>
<img src="http://www.j-body.org/registry/firewolf23/thumbnail_personal_pic.jpg">

vroom..... pssssssss, hear that, yup, Don't miss with me!!


Re: Utah club
Thursday, February 20, 2003 3:28 PM
hey ryan,

we will meet you at 6pm or so.

at fashion place right?
Re: Utah club
Thursday, February 20, 2003 6:21 PM
hey firewolf,

you never told me how to set up a check valve for your turbo.
Re: Utah club
Thursday, February 20, 2003 6:22 PM
so friday at 6:00pm i am up for that for sure!!!!see ya there 2marro
laters <br> Its Pronounced {TEAR I AL}

Re: Utah club
Thursday, February 20, 2003 8:34 PM
Hey guys check out this site that I found it has forged racing pistons contecting rods cam crankshafts and a bunch of stuff for both the 2.2 and the 2.4

http://www.importperformanceparts.net/imports/importscavalier.html

sorry that the adress is long but it is well worth it
Re: Utah club
Thursday, February 20, 2003 10:14 PM
tyerial
Sat. at 6:00 pm
Re: Utah club
Friday, February 21, 2003 11:18 AM
KACE, I emailed you back and told you that I don't use a check valve. <br>
<img src="http://www.j-body.org/registry/firewolf23/thumbnail_personal_pic.jpg">

vroom..... pssssssss, hear that, yup, Don't miss with me!!


Re: Utah club
Saturday, February 22, 2003 11:56 AM
hey firewolf,

i didn't get your e-mail.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search