Rolled my 04 Sunfire anybody want parts? - South Mountain Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 7:01 AM
I rolled my 04 Sunfire yesterday just outside of Fort Collins. I live in windsor so if anybody it in need of some parts for a small fee I will be willing to part with whatever you need, I have one brand new half shaft the other is original, the Motor and trany are still in great shape only 70000 miles. I also have a complete set of monroe sensatrac struts. There was a lot of damge to the left front suspension parts so I don't know if that strut is ok or not I haven't had a chance to look yet. It wont start due to some electrical mix up from the crash maybe an inertia switch or something, do we even have those? Call me at 307-399-6121 or 970-686-5178, the car is in my garrage in Windsor, CO and I probably have most the tools need for pulling any parts. Send any request for parts my way!

Thanks

Adam




Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 10:08 AM
how much for the rear trim piece............where the reverse lights and rear license plate is....ill give you 100 bucks shipped to az.

let me know



*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 11:57 AM
damn, I want the whole interior. LOL but I can't afford it.


Desert Tuners

“When you come across a big kettle of crazy, it’s best not to stir it.”


Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 12:03 PM
Snowman

I have removed the rear trim peice it contains the reverse lights and rear license plate holder. I sent you an email with a pic of the back end i can also send you a pic of the removed piece if you would like, the sooner you contact me the sooner you can have your part!


Z24 Freq (jaret)
Who knows maybe you can afford it, no reasonable offer will be refused
Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 12:38 PM
How much for your engine, ecu, and maybe even tranny if its a manual?



Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 1:11 PM
Wasp96

The tranny is a auto so you probably wouldn't want that then.
$800 would sound good to me for the engine and ecu, no garuntees though, the thing wouldn't start due to something from the roll, but the thing ran like a champ and I have yet to have a single problem with it. I would problem need your hand and a hoist to pull the the engine if you are interested.

All others here's a list of parts that some may be interested in
Monroe Struts all 4 (left front may be damaged)
Alteza Style carbon fiber tail lights
All outside lights with the exception of side markers are in perfect condition
Left side triangle window and door windows are undamged

this list will expand as i get further along with the disasembly
Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 2:03 PM
adam im ging to call you here in a little bit, i live in greeley



Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 5:04 PM
how did you roll a sunfire?



Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 5:11 PM
Im looking into getting a rear bumper from a newer Sunfire, how much would the bumper, crush guard, and if possible, the filler for the trunk?


Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 5:30 PM
PM and Email sent

-Seth



Re: Rolled my 04 Sunfire anybody want parts?
Saturday, April 29, 2006 5:53 PM
navycav3

was waiting to here from you I'll be around anythime after 1pm tomarrow what parts might you be interested in?

Ender_Wiggin
sounds like that would be around 200-400 depending on what all you wanted and how hard it would be to get, make me an offer and we will see what we can do?




Re: Rolled my 04 Sunfire anybody want parts?
Monday, May 01, 2006 1:00 AM
is the front bumper and headlights still good


http://www.geocities.com/WIJTuners/?200511

wi jbody site

http://www.cwctekcom.com/ go here for some awsome deals on installs and awsome stereo stuff in new lisbon, WI
Re: Rolled my 04 Sunfire anybody want parts?
Monday, May 01, 2006 12:32 PM
Is there any damage to the interior? I could use a couple pieces.



Re: Rolled my 04 Sunfire anybody want parts?
Monday, May 01, 2006 12:41 PM
id be interested in the whole dash

i would not need the cluster or hvac , or radio







Re: Rolled my 04 Sunfire anybody want parts?
Monday, May 01, 2006 7:33 PM
Things have been pretty busy for me today so I will get to this as I can, to help me speed things allong PM me with what you are interested in and with what seems to be a reasonable offer to you. or email me at a1brannon@comcast.net

Thanks
Adam

Also if anybody knows of ar has a reliable car for sell in the up to $1000 range in the Fort Collins, Loveland, Greely area please let me know.
Re: Rolled my 04 Sunfire anybody want parts?
Monday, May 01, 2006 8:35 PM
im gonna have to pass on the rear trunk piece.........i hate to back out but i dont have the finances to get it. sorry


*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
Re: Rolled my 04 Sunfire anybody want parts?
Monday, May 01, 2006 9:32 PM
im pm'd ya







Re: Rolled my 04 Sunfire anybody want parts?
Monday, May 08, 2006 7:46 PM
Fuel pump still intact??





Car Domain Update 3/06
Click on SIG

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search