hey we need to meet up sometime. my car looks decent. now. isnt there another boosted guy here. we all should meet or cruise. on a weekend.
ECOtec DOHC
They are all good brands. Just find the best price.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
hey D. did you tune your car on your own or did you get someone else to do it?
ECOtec DOHC
First I had Sean at Solid Technologies Dyno tune it for me. I didn't like the way it turned out so I have been tweaking myself ever since.
I have gotten my gas mileage back up to 26MPG with 750cc injectors. So I am pretty stoked about that. I also tweaked the timing and got a little more mid-range power and drive ability.
By no means am I an expert at tuning. That is why I would be doing it for you at cost.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
oh dont worry about it. was just curious on who tuned yours. hey man ive been seen quite a few j-bodys on base. we needa all meet up. have you seen mine yet? with the HID's. saw a grey one with black rims and an orange one like mine with a mild kit on it..
ECOtec DOHC
I haven't talked to any of the j's on base. Though I have noticed a few more showing up. If you can get them together lets do it.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
Hey D. where did you get the engine gaskets and all that. and what head gasket did you go with?
ECOtec DOHC
Using a cometic MLS head gasket. THe oil pan and cover gaskets are just high temp RVT.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
hey d has far has your engine build. what else did you need to get. im a pro at honda but these motors i dont know what needs to be replaced while the motor is being built. saw slight metal shavings in my oil filter. time for an upgrade. let me know. or write me a list. im going forged and gettin the hahn kit so will see what happens.
ECOtec DOHC
Just look in my Sig to see what all I have. If you want to build it more than that be my guest.
I would suggest getting your head port matched. I didn't do that and I am kinda regretting it. Also I am wishing I had a ported throttle body. But that is easily fixed.
The best places to get the parts is Karo and Aaron. allecotec.com and turbotecracing.com. Also if there is something not on the websites just call them. What ever it is you want I am sure they can get it.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
Eric at Solid Tech.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
i was just down there at hollowman AFB..saw a whit 03-04 j
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
If you were at Kirtland AFB then it could have been my car. But not at Hollowman.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
did he build it well? just curious. since im new here i really dont know where to go. dont want to do it myself. this motor is new to me. and around what price?
ECOtec DOHC
Darryn DiSanto wrote:If you were at Kirtland AFB then it could have been my car. But not at Hollowman.
we were approx 10 miles away from there..soo perhaps
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
He did a great job on the build itself. i wasn't completely happy with the tune though. Plus it took for ever to get it done. It took about 5 months and cost me 4800.00
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
have you heard of that budlong. would like to check them out. and see what they are about
ECOtec DOHC
Budlong is the best. you will have to pull the motor yourself though. They did my head and honed my block.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
nice talked to them yesterday.seem like good people. and price is not bad at all. did you get oversized pistons or stock. and the motor seems easier to pull out then on a honda. so thats no biggy.
ECOtec DOHC
I have stock sized. You should keep the stock size too. Bigger pistons ruin the engines integrity. They bore the sleeves to make them fit. It makes the sleeves weaker in the process. I dont suggest it. Plus honing a cylinder is cheaper than boring it out.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
cool i found some turbo cams on turbo tech or all eco. one of those sites. i got parts ordered. just need to see if ima use my motor or look for another block for the build
ECOtec DOHC
I kept my factory cams so i would love to see what the turbo cams are like.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835