today is the last day to pay for parts on hold. as of tomorrow its all back up for sale
OK everything i have left is listed below. pics on page 1. FIRST PERSON TO SEND ME MONEY GETS THE PARTS.
Paypal preferred. My paypal is speedskater810@hotmail.com
club coachman Intercooler $150
2 bar MAP sensor $100
thread in IAT $30
Innovate LC-1 wideband with red digital gauge and bung. Threads on sensor are in rough shape but should be usable with a little work. $150
Aluminum control arms from GP, never installed, no ball joints no bushings $210..... $225 with prothane bushings
Prothane control arm bushings New in box. $20
Team green LSD for 4t40. Never installed $175
2.3 HO intake manifold. Partially smoothed $30
2.3 TB, fits HO mani. bolt holding throttle plate on are broke. could be fixed. $10
2.4 TB, Stock, no sensors $10
62mm TB. fits 2.4 needs a little work to be perfect but it runs as is. TPS is shot. $100
stock motor mounts upper, lower and 4spd auto. FREE just pay shipping
drivers side power window regulator and motor. worked when removed. $20
stock lower air intake. the part in fender area. FREE just pay shipping
Stock washer fluid reservoir FREE just pay shipping
Box of ignition coils, ect. contains 4 - 2.4 coils, 2 - 2200 coils, 8 - 2.4 spark plug boots and 2 - 2.4 coil housings $50
Box of spark plug wires. contains 1 set of 2200 wires, various lengths of Accel 8.8 wires, boots and terminals to be crimped onto Accel wires. $20
1 set (2 of each) "sunfire GT" door mouldings. FREE Pay shipping
1 drivers side door panel. crank window, speaker cover missing. fabric has been dyed black FREE pay shipping
pics of all except LSD
Edited 1 time(s). Last edited Sunday, August 02, 2009 10:32 AM
Quote:
62mm TB. fits 2.4 needs a little work to be perfect but it runs as is. TPS is shot. $100
What kind of work. It just needs a new Throttle Position Sensor or what?
Will a stock TPS from a 2.4 bolt onto it to take care of the problem?
Really looking for a nice TB to bolt up to my supercharger w/o any big problems.
Thanks
Legendary Bash Veteran
Quote:
What kind of work. It just needs a new Throttle Position Sensor or what?
Will a stock TPS from a 2.4 bolt onto it to take care of the problem?
Really looking for a nice TB to bolt up to my supercharger w/o any big problems.
Thanks
To be usable it just needs a TPS. Its a stock 2.4 TB bored out and sleeved so a new 2.4 tps will fix that. On my NA engine it had a high idle due to the throttle plate being a bit out of whack and the idle air sensor no longer has control over the idle because of the sleeve.