Here is my classified ad, If anyone in Edmonton or Calgary is interested..........................
Want to build a hardcore Ecotec engine? These are the parts for you!
Never installed, new in box. I am building a motor for my GMPP Supercharger so I cant use these:
Comp Cams stage 3 N/A Grind-
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 3,500-8,000
Intake Duration at 050 inch Lift: 222
Exhaust Duration at 050 inch Lift: 224
Duration at 050 inch Lift: 222 int./224 exh.
Advertised Intake Duration: 264
Advertised Exhaust Duration: 268
Advertised Duration: 264 int./268 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.456 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.453 in.
Valve Lift with Factory Rocker Arm Ratio: 0.456 int./0.453 exh. lift
Lobe Separation (degrees): 113
These are huge cams made for big N/A power-
I paid $460.00
Wiseco 11:1 comp piston heads 20 0ver.
These are custom pistons for the ecotec that I had made, 1 full point over stock, these are custom oreder and were ordered with vlave reliefs. I paid $650.00 for these and waited 3 months to have them made.
E-Mail me at: firstname.lastname@example.org
"Go Before Show Yo."
CARCUSTOMS.NET, THE BEST SERVICE ON THE ORG!!!