FS: Vulcan ECOtec intake manifold - South Central Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
FS: Vulcan ECOtec intake manifold
Monday, August 09, 2010 2:49 PM
Hello,
Well a few car plans have changed. Vulcan sucked on making this manifold. Service sucked has well. I have fixed the issues with their imperfections, and just can't complete my project right now. I am selling this intake cheap because it was part of the turbo kit I bought from a friend of mine, so I didn't actually pay for it. Awesome. I did have a local shop redo the areas that needed work. A few people with these manifolds know these need a little bit of work. I welded a Levelzero TB flange, and cut the log so it won't hit the radiator hose. I also had them drill more holes to allow more vacuum ports if needed. So I just want to get back what I invested into this manifold. I'm sure the people with the right minds would do wonders with it. The offer is $220.00. Plus shipping. I know shipping is around the $20.00 mark. Can't be certain till I get your info. You can PM me or text at 915-494-4235.
Manifold with the tail cut off to clear the radiator hose.


LevelZero flange so you can use your stock gasket from your TB.


Bigger look at the picture


More ports to get your vacuum on.........( 'don't bother me when I'm cleaning my room")



If you live close to ABQ NM, I might be willing to drive and meet half way. I need to take a trip some place. Let me know. Thanks
Paul C


ECOtec DOHC


Re: FS: Vulcan ECOtec intake manifold
Wednesday, August 11, 2010 11:59 AM
maybe interested in this



Re: FS: Vulcan ECOtec intake manifold
Wednesday, August 11, 2010 3:57 PM
SLRdohc wrote:Hello,
Well a few car plans have changed. Vulcan sucked on making this manifold. Service sucked has well.


I hear ya there!




Your WHAT hurts?
Re: FS: Vulcan ECOtec intake manifold
Thursday, August 12, 2010 3:48 PM
It's ready to go. 220 or obo. I have no use for it and am not losing any money off of it.


ECOtec DOHC

Re: FS: Vulcan ECOtec intake manifold
Saturday, October 02, 2010 7:18 AM
120.00 plus shipping guys. It's just taking up space


ECOtec DOHC

Re: FS: Vulcan ECOtec intake manifold
Saturday, October 02, 2010 7:35 AM
what has to be done to make this thing work? what kind of tb? tuning involved?



Re: FS: Vulcan ECOtec intake manifold
Saturday, October 02, 2010 9:59 AM
I welded a flange from levelzero. You could use your stock TB. All you will need is your stock gaskets from your stock manifold and just put them on this one, A few brass fittings to get your vacuum ports connected. That's it. The flange is positioned so that the throttle cable will be facing down. I didn't think that was an option till I got the idea from another fellow J owner, As far has tuning I'm not sure. You may need a tune. I know people doing just the cobalt manifold need to retune.


ECOtec DOHC

Re: FS: Vulcan ECOtec intake manifold
Monday, October 04, 2010 6:48 PM
SOLD GUYS!!!!!


ECOtec DOHC

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search