Ecotec MSD DIS-2 - Performance Forum - j-body.org

Ecotec MSD DIS-2 - Performance Forum

Forum Archive
This thread has been archived. Posts that have been archived can not be replied to.

Ecotec MSD DIS-2

Sunday, February 01, 2004 12:10 PM

I am going the MSD 2 route with my ECO.

Here is what I just ordered

DIS2 box #6211
2 GM adapters #8870
2 Coil Packs #8224

Ive found EVENTS wiring diagram which is great, but it was for the 2200.

I know JETBLACKGT has done this with the 2.4 ....no diagram

Can anyone help me wire this badboy up when I gets here???

Thanks

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 12:17 PM

alex16cav

just so u know, the 6211 is not the programmable one. i believe the 6212 is, dont know if you knew or not. 

<img src=http://images.cardomain.com/member_images/9/web/333000-333999/333391_68_full.jpg>
Sponsored By eXploited Racing

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 12:20 PM

Torque Monster

Should have just waited for MSD to release the Ecotec kit they're doing... 

Click below to go to Jbodyfusion.com !
<img src=http://img.villagephotos.com/p/2003-11/470140/coollogo_com_205691389.gif>

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 12:24 PM

super2200

@!#$, now I have to call jegs and see what to do about changing my order.

Thanks for the heads up Alex. goodthing you responded so quickly.

Well keep the help coming, I need it.

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 12:25 PM

super2200

I read about losing your power steering didn't know if that was for me

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 2:17 PM

Qwibby PTE Powered

torque monster... how long?

LE61T PTE6262 Powered

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 2:26 PM

Torque Monster

QUICKblackECOTEC wrote:torque monster... how long?

Good question, all I know is, is that they are working on it. 

Click below to go to Jbodyfusion.com !
<img src=http://img.villagephotos.com/p/2003-11/470140/coollogo_com_205691389.gif>

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 2:34 PM

super2200

Don't you need the Digital-7 to run the new distributor?
Can you use the Dis-2 with it?

I was under the impression this was geared towards high end drag applications?

Just wondering, if not maybe I should have gone that route.

Re: Ecotec MSD DIS-2

Sunday, February 01, 2004 7:29 PM

Rodimus Prime

msd making a system????????? im interested

1989 Turbo Trans Am #82, 2007 Cobalt SS G85

Re: Ecotec MSD DIS-2

Monday, February 02, 2004 7:47 PM

super2200

When you say kit are you talking about the distributor and 8.5mm wires??? 

<img src= "http://registry.gmenthusiast.com/images/super2200/myecotec.JPG">

Re: Ecotec MSD DIS-2

Monday, February 02, 2004 8:00 PM

Rodimus Prime

^^nice engine

1989 Turbo Trans Am #82, 2007 Cobalt SS G85

Re: Ecotec MSD DIS-2

Monday, February 02, 2004 8:11 PM

Funky Bottoms (Event)

jimmy z is also currently working on an ecotec setup... will be using the dis-2 and wont sacrifice any luxuries...

as of now, only 1 or 2 people have wired an msd up... i cant reemmber the post name or the people, but they may have the wiring diagrams... unfortunately i dont right now...

Re: Ecotec MSD DIS-2

Monday, February 02, 2004 8:20 PM

super2200

Thanks Matt and Event

I'll have to keep an eye out 

<img src= "http://registry.gmenthusiast.com/images/super2200/myecotec.JPG">

Re: Ecotec MSD DIS-2

Monday, February 02, 2004 8:55 PM

JimmyZ

I know Jesse (Ecocav) had one on his car.

General is right about the one I've been working on. From the original idea to make a bolt-on plug-in MSD system for the 2.4 and 2.2/2200, I'm also working on a design for the Ecotec. The test fit on the 2.4 has gone very well so far and will basically let you install a complete MSD ignition (DIS-2, MSD coil packs and MSD Superconductor wires) in less than an hour with hand tools and NO CUTTING OR SPLICING WIRES.

The 2.4 system is a complete replacement for the IDI cover and the enclosed electronics. The 2.2/2200 system will be a mounting bracket that will relocate the module & coil packs and give a solid mounting point for the DIS-2 control unit. The Ecotec system is still in design, but will be the same theory. it will attach to the top of the motor and provide wiring, mounts, etc for all the components.

I will keep everyone posted, as the 2.4 and 2.2/2200 systems will be released very shortly. The Ecotec system is a few weeks from test fitting right now because of a few setbacks, but it won't be forgotten

09:f9:11:02:9d:74:e3:5b:d8:41:56:c5:63

Re: Ecotec MSD DIS-2

Tuesday, February 03, 2004 11:17 AM

super2200

Thanks Jim, sounds perfect

I appreciate what you're doing for everyone interested in MSD.

Have a good one and keep up the great work!!!

 

<img src= "http://registry.gmenthusiast.com/images/super2200/myecotec.JPG">

Re: Ecotec MSD DIS-2

Tuesday, February 03, 2004 7:14 PM

Rodimus Prime

I got the money when your ready with it JZ

1989 Turbo Trans Am #82, 2007 Cobalt SS G85

Re: Ecotec MSD DIS-2

Tuesday, April 06, 2004 11:21 AM

armor_37

update?

Forum Archive
This thread has been archived. Posts that have been archived can not be replied to.

Start New Topic Advanced Search