I just got my aluminum intake but it has no holes or nipples, now, this is 2.3L, so I guess the IAT is in the manifold, but what do I do with the hose from the oil/water separator? Quick responses would be great!
<br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
BOMP! <br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
re-bump, C'mon! Somebody's gotta know. <br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
put a breather filter on it, check the fAQ, page 2...near the bottom
if you absolutely NEED to put it back into the intake, drill holes in the intake, go to the store, get nipples and put em in the drilled holes and add the hoses. <br>
Will a breather have any negetive effects? <br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
nope, cleaner throttle body and intake manifold... since its not being gooked up with oil <br>
Rock on, thanks Event. <br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
WHich intake did you get? Any pix??
Thanks
No name brand
Built it from some parts from airflowonline, though if you ever buy from them, make sure it's not a 950mile trip :S
Soonest I can get pics is sunday because I don't have my camera, though it's nothing crazy to look at, it'll probably be one of the few quad 4 intake pics on this forum
I'll post when I get the camera, but damn, does it sound good! <br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
Okay, here's one for ya. I took it out for a drive, got it all bit above 3000RPM, then my "low coolant" light flashes for like one second, and it hasn't come on since. I am a little low, but could my pipe resting on the return hose from the rad a little bit cause that? (It's not kinking it, just ovalling it a bit) <br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
it shouldnt really, but when its cold, see how low you are on coolant from te bottle... older cars can sometimes get leaks, that are small and slow. <br>
Like I said, not much to look at.
I think I'll paint the intake red tho. <br>
<img src=http://registry.gmenthusiast.com/images/bradsk8815/PangolinSig.jpg>
cool man i just needed ideas. what part number did you use for the tube. is it steel or alumium?
o ya which breaather filter did you use.
thanks