GME Network  |  J-Body Organization  -  Ecotec Power  -  GM Delta
The J-Body Organization
Log In
 you are here: / home / forum
Saturday, November 21, 2009 
REGISTER NOW

How did this valve bend like this? - Performance Forum

Discussions about performance modifications to j-body automobiles which do not involve any kind of forced induction or nitrous. Topics in any way related to turbo or supercharger should go in the Boost forum, and nitrous topics in the Nitrous Oxide forum.
Forum Post / Reply
You must log in before you can post or reply to messages.
Go To TopSearchOptionsRulesHelp
Previous MessageNext Message
How did this valve bend like this?
Thursday, November 05, 2009 6:55 PM
Web PageICQAOL IMYahoo MessengerJabber / Google TalkPhoto



anyone have a guess as to how this happened? I know...just curious if anyone else has a guess



Advertisement
Upgrade to premium membership to remove this ad.

Re: How did this valve bend like this?
Thursday, November 05, 2009 6:58 PM

Keepers fell out, dropped into cylinder?



Bill Hahn Jr.
Hahn RaceCraft

World's Quickest and Fastest Street J-Bodies
Turbocharging GM FWD's since 1988
www.turbosystem.com
Re: How did this valve bend like this?
Thursday, November 05, 2009 6:59 PM
Web PageAOL IMMSN MessengerYahoo MessengerPhoto

i used my mind.



Re: How did this valve bend like this?
Thursday, November 05, 2009 7:00 PM
AOL IMPhoto

Either a vise or the keepers let go and it fell completely into the cylinder. If it bent while it was still in the head i have no friggin clue how you removed it from the head.



Tinkles

2003 Cavalier 1SV
Bagged and Blown


Re: How did this valve bend like this?
Thursday, November 05, 2009 7:04 PM
Web PageAOL IMPhoto

i know and guessed it on my first attempt but its for you guys to figure out



Re: How did this valve bend like this?
Thursday, November 05, 2009 7:05 PM
Web PageICQAOL IMMSN MessengerYahoo MessengerPhoto

you were using it to masterbate with it?



Z24 Cardomain Site ll ZQ8 Car Domain Site
Re: How did this valve bend like this?
Thursday, November 05, 2009 7:10 PM
Photo

Skipped timing piston smacked valve shot valve through head and through valve cover/IDI cover?



Official JBO Chat Night. Wed 9:30pm ET.
Re: How did this valve bend like this?
Thursday, November 05, 2009 7:59 PM
AOL IMMSN Messenger

im going to go with vise.



I must confess... I feel like a monster!
Re: How did this valve bend like this?
Thursday, November 05, 2009 8:04 PM
AOL IM

there is no valve.





Re: How did this valve bend like this?
Thursday, November 05, 2009 8:28 PM
Web PageICQAOL IMYahoo MessengerJabber / Google TalkPhoto

hammer and a vice

PS....you gotta have a mini sledge...and a good solid swing or 12



Re: How did this valve bend like this?
Thursday, November 05, 2009 11:21 PM
MSN Messenger

testing it's overall strength? Or were you just testing your own strength, hahahah.



Re: How did this valve bend like this?
Friday, November 06, 2009 1:45 PM

I gotta go with PJ on this one.
Re: How did this valve bend like this?
Friday, November 06, 2009 2:52 PM
Web PageICQAOL IMYahoo MessengerJabber / Google TalkPhoto

Brad (joining JBOShortBus) wrote:

testing it's overall strength? Or were you just testing your own strength, hahahah.


mine



Re: How did this valve bend like this?
Friday, November 06, 2009 4:56 PM
Web PagePhoto

Atrioventricular valve,from when that asian chick left???








"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
Re: How did this valve bend like this?
Friday, November 06, 2009 5:09 PM
AOL IMMSN Messenger

i find it pretty awesome that the stock valve could actually take that kind of abuse.

sucks i have seen the head of a STAINLESS valve embedded INTO the top of the piston



I must confess... I feel like a monster!
Re: How did this valve bend like this?
Friday, November 06, 2009 5:28 PM
AOL IM

Imagine 8 of those when an interference engine blows a timing chain...
Re: How did this valve bend like this?
Friday, November 06, 2009 5:49 PM
AOL IMPhoto

Ryan Pitt wrote:

Imagine 8 of those when an interference engine blows a timing chain...


Valves dont bend like that when the valves and pistons make love.



Tinkles

2003 Cavalier 1SV
Bagged and Blown


Re: How did this valve bend like this?
Saturday, November 07, 2009 9:18 AM
AOL IMYahoo Messenger

You guys should of seen my valves when my chain skipped on me




Best time to date - 13.07@109.16 - AUTO!!


Forum Post / Reply
You must log in before you can post or reply to messages.

 

[ home | regions | premium membership | members | library | faq ]
[ events calendar | gallery | chat | classifieds | store ]
[ forums | links | teams/clubs | contact us ]

TERMS OF SERVICE   PRIVACY POLICY