adjustable cam gears for ld9 - Page 13 - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: adjustable cam gears for ld9
Sunday, April 18, 2010 7:06 AM
Yaayyy










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Re: adjustable cam gears for ld9
Sunday, April 18, 2010 4:47 PM
Seriously, I need a set. When and how much. Without these my HG2 cams are kinda useless.




Re: adjustable cam gears for ld9
Sunday, April 18, 2010 7:26 PM
neat. brad wants me to try his crane .430 lift intake cam in my engine. maybe these gears would ehlp out



Re: adjustable cam gears for ld9
Sunday, April 18, 2010 8:50 PM
bad ass i want a set!!!



8 psi with m62 and IAT under 100
Re: adjustable cam gears for ld9
Monday, April 19, 2010 4:07 AM
Freaking sweet! I WANT!



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: adjustable cam gears for ld9
Monday, May 03, 2010 4:27 PM
well I did the first test drive tonight, nothing broke
except for the charge who pop off



Location: Montreal, Quebec
Re: adjustable cam gears for ld9
Monday, May 03, 2010 7:48 PM
Lol sweet, I was gonna bump this earlier. When is dyno coming? Did you dyno before these gears?










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: adjustable cam gears for ld9
Monday, May 03, 2010 9:08 PM
niec!!!



8 psi with m62 and IAT under 100
Re: adjustable cam gears for ld9
Monday, May 03, 2010 10:10 PM
nice cam gears! do u know if shop u got these cam gears from carry them for tha 95 sunfires? do u also know if they carry aftermarket racin' cams? i'm lookin' 2 finish buildin' my 95 sunfire. hit me back a-sap bro! thanks!
Re: adjustable cam gears for ld9
Tuesday, May 04, 2010 7:33 AM
he made these gears...



http://www.cardomain.com/ride/2623318



Re: adjustable cam gears for ld9
Tuesday, May 11, 2010 5:49 AM
no I did not dyno the car but I hope to do it asap when I will have 2 minutes



Location: Montreal, Quebec

Re: adjustable cam gears for ld9
Saturday, May 22, 2010 12:27 PM
Bump.....Checking for updates.





Re: adjustable cam gears for ld9
Saturday, June 19, 2010 3:30 AM
new bump for updates on this



Eat my shift
Re: adjustable cam gears for ld9
Sunday, June 20, 2010 10:26 PM
That looks sweet! What is the anticipated price and availability of this setup?


PSN ID: Phatchance249

Re: adjustable cam gears for ld9
Monday, June 21, 2010 2:18 PM
well after 900 km everything is fine, I rev a couple a time up to 7000 rpm with zero slipping of the cam gear (my only fear)
I will try to begin the production of the timing cover this week if I'm not to busy at work to start to sell it asap



Location: Montreal, Quebec
Re: adjustable cam gears for ld9
Friday, July 16, 2010 5:33 PM
Sweet! keep us informed.




Re: adjustable cam gears for ld9
Monday, July 19, 2010 11:55 AM
update

vacuum jig








Location: Montreal, Quebec
Re: adjustable cam gears for ld9
Monday, July 19, 2010 12:09 PM


Perfect as always.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: adjustable cam gears for ld9
Monday, July 19, 2010 12:37 PM
Gosh, I will be saving up all winter for these.... Damn.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: adjustable cam gears for ld9
Monday, July 19, 2010 4:03 PM
is there any limit to what you can do?



180hp in 1989 or 145hp in 2002, you decide. >
Re: adjustable cam gears for ld9
Monday, July 19, 2010 5:33 PM
z yaaaa wrote:is there any limit to what you can do?


yes, money is the limit



Location: Montreal, Quebec

Re: adjustable cam gears for ld9
Wednesday, July 21, 2010 11:28 AM
Good night,got any idea on the price tag yet?




Re: adjustable cam gears for ld9
Thursday, July 22, 2010 12:52 PM
I did the back side of the cover today




now the price for the kit is 825$ plus shipping

For this price you get

timing gear

the hub is made in 2024 aluminum anodized
the tooth are made in 4340ht with a ion nitriding treatment

timing chain cover made in 6061 aluminum non polished
oil seal not included







Location: Montreal, Quebec
Re: adjustable cam gears for ld9
Friday, July 23, 2010 2:34 PM
Oh my, i need to get money fast,it all looks great.




Re: adjustable cam gears for ld9
Friday, July 23, 2010 7:09 PM
ah yes... the cat is out of the bag! $825 is definitely worth it but one hell of a chunk of change LOL

im thinking only the die hards are going to pick up the components.





180hp in 1989 or 145hp in 2002, you decide. >
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search