eco 02 fuel rail setup question - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
eco 02 fuel rail setup question
Sunday, January 05, 2014 11:22 AM
I have an 03 cavalier and want to place the green top injectors and 02 rail on my car.

Question 1. Since the 03 rail has a fuel pressure regulator or the rail and the 02 does not but has the fuel pulser in the line, is it posable to add a aftermarket fuel pressure regulator to the system?

Question 2. Why does the line with the pulser go in the middle of the rail? Are the rail designed different inside?

I have done research and found that the an fittings for the quick fit to hard lines by the firewall are by russell 640863 & 640853 so it all seem possible.
Want able to find many 02 setups fuel setups out there
Attachments
1388945966370.jpg (1491k)


Re: eco 02 fuel rail setup question
Sunday, January 05, 2014 3:32 PM
I make a billet fuel rail with an lines.. Pm me if interested



Re: eco 02 fuel rail setup question
Wednesday, January 08, 2014 6:36 PM
The 02 rail has a regulator and the damper, if you want to use it u have to pull the spacers out of the head. Then it hooks up like your 03+.
Re: eco 02 fuel rail setup question
Wednesday, January 08, 2014 6:38 PM
Nevermind just clicked the attachment and seen why your asking.
Re: eco 02 fuel rail setup question
Friday, January 10, 2014 6:14 AM
Why not just get the cups that Jason can also help you get and use the 03 rail? Seems easier to me and will cost the same, if not less, than the an fittings.



"In Oldskool we trust"
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search