ICS TITAN HEAD GASKET - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
ICS TITAN HEAD GASKET
Wednesday, January 08, 2014 1:28 PM
I am interested in a ICS Titan head gasket however they list the bore for their head gaskets as 3.625".

Stock bore runs 90mm or 3.54331"

Anyone ever order one of these?


GMR has got nothing on this

Re: ICS TITAN HEAD GASKET
Thursday, January 09, 2014 8:41 AM
Anyone know the exact thickness and bore of a stock head gasket?


GMR has got nothing on this
Re: ICS TITAN HEAD GASKET
Friday, January 10, 2014 9:55 PM
it's a head gasket, the openings are bigger than the cylinder bore by default

order the 3.625, it will be perfectly fine


2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
Re: ICS TITAN HEAD GASKET
Saturday, January 11, 2014 11:24 AM
thickness of a stocker is around .050. the bores are bigger because its made for a quad 4. they have 3.62" bores, whereas LD9 is 3.54".

tyler wichers ran one, no idea on how long though. and im pretty sure jason mcelvy tried one out on an engine engine stand motor or something of the sort...



RIP silver car. You will be missed.
Re: ICS TITAN HEAD GASKET
Saturday, January 11, 2014 1:12 PM
i did run it with no problem for around a year until my valves made love with the pistons!
i was running a ld9 block with a 086 head



Re: ICS TITAN HEAD GASKET
Monday, January 13, 2014 5:39 AM
I was pretty sure but just wanted to make sure. Also wanted to see if anyone has had experience with this particular head gasket. Thanks for the help.


GMR has got nothing on this
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search