z24cavalier3400 Build Thread - Page 17 - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:22 PM
Sorry for the long delay. Other projects and setbacks kept me from updating. Mocked up the K brace. Also installed more APR hardware!














On the inside my car looks like a fighter jet.

Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:39 PM
Reloomed my headlight harness
Wired up my halos and Demon eyes along with the HID kit.
Installed my Ambient Air Temp sensor for my rear view mirror in the headlight bracket.




















On the inside my car looks like a fighter jet.
Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:40 PM
Installed my grand am windshield wiper arms that are able to be folded up. They are slightly longer then stock.


















On the inside my car looks like a fighter jet.
Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:44 PM
Picked up some more goodies!

Viper 5902 Remote start and keyless entry

SmartStart DSM200 - Cellar control

Hornet 516L - Programmable Voice System

508D - Motion Sensor

520T - Battery Backup

507M - Digital Tilt Motion Sensor


























On the inside my car looks like a fighter jet.
Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:46 PM
Started assembling my trailing arm.
I had it powdercoated.
Installed the braces and my 1" addco bar.
This trailing arm also has the stock 19mm bar in it.


















On the inside my car looks like a fighter jet.
Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:53 PM
Removed the old trailing arm.
Picked up washers that fit perfectly for aligning/ shimming the rear end and happened to equal the same width as Jeffies Delrin bushings.

Installed my BAER brake brakets and wheel bearings on the new axles.
























On the inside my car looks like a fighter jet.
Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:55 PM
Installed the new trailing arm.
My lowered spare tire well hit the rear tie bar so I cannot use it. The suspension wasn't even loaded when it hit. Also had to remove my charcoal canister since the bracket for the tie bars hit.
Also installed the rear brakes.


















On the inside my car looks like a fighter jet.
Re: z24cavalier3400 Build Thread
Sunday, August 14, 2016 1:58 PM
Installed and bled the brake lines. Also had an issue for a while back when I hooked up the ground in the engine bay for the headlight harness and turned the headlights on the wire off the headlight switch would start melting. If the ground wasn't hooked up it worked fine. Apparently if you do not have the ground hooked up the headlights work by positive side trigger at the bcm with it hooked up they are negative triggered so when I wired up my auto headlights I used positive trigger so switching to ground it now works fine with no melting. Took me for ever to figure out how after a few years all of a sudden I had this issue. I must have never had the ground hooked up.
























On the inside my car looks like a fighter jet.
Re: z24cavalier3400 Build Thread
Thursday, January 05, 2017 10:58 AM
Hi their i just want to say i like what you've done to your cavalier, i have read a lot of it and have learned a lot and hope to see what you do next.file:///Users/tylerlohrer/Downloads/IMG_20160428_153907437.jpg
Attachments
IMG_20160428_153907437.jpg (1565k)

Re: z24cavalier3400 Build Thread
Saturday, January 07, 2017 3:38 PM
Have you got dyno numbers?
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search