58 tooth to 6-1 Fix Trigger Wheel - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
58 tooth to 6-1 Fix Trigger Wheel
Tuesday, March 31, 2015 12:47 AM
Hate the idea of having to run a external trigger wheel on you GEN 2 Blocked swapped 6-1 cars the fix is here a direct bolt on trigger wheel that will replace the 58 tooth wheel that is affixed to the crank shaft with 3 bolts this is timed bolt on and install. 300.00 each pm for more info or to purchase


97cavalier

Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, March 31, 2015 12:56 AM
Not to be a dick but there is nothing wrong at all with an external trigger setup, especially for $300. Nice work though on that trigger, it is a nice piece.



Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, March 31, 2015 3:19 AM
$300 is really rough. I can get that made for significantly less money if you like, and I could help setup a group purchase or two.






PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, March 31, 2015 3:54 AM
Thing for me is if I'm going to take the crank out stock components are not going back in. So I'd just swap to the correct crank at that time and run forged l61 rods for the same price.

Awesome idea though, looks like a nice piece.



"In Oldskool we trust"
Re: 58 tooth to 6-1 Fix Trigger Wheel
Friday, April 03, 2015 8:51 PM
The stock crank isn't going to have the right timing it never had 6-1 in le5


97cavalier
Re: 58 tooth to 6-1 Fix Trigger Wheel
Friday, April 03, 2015 9:20 PM
I was considering on somehow doing something like this. Only thing I wonder about yours, have you got it clocked right for the right timing?


"United by Individuality"
"If life is a joke, why aren't we laughing?"
"Normality depends on one's perception of reality."
http://www.cardomain.com/ride/3820803
Re: 58 tooth to 6-1 Fix Trigger Wheel
Saturday, April 04, 2015 6:39 PM
Yes it is bolt on in place of the stock one and its timed 100% true got the price down to 250 trying for better way to produce


97cavalier
Re: 58 tooth to 6-1 Fix Trigger Wheel
Saturday, April 04, 2015 7:24 PM
97cavalier wrote:Yes it is bolt on in place of the stock one and its timed 100% true got the price down to 250 trying for better way to produce


Enforcer has offered help on that.


"United by Individuality"
"If life is a joke, why aren't we laughing?"
"Normality depends on one's perception of reality."
http://www.cardomain.com/ride/3820803
Re: 58 tooth to 6-1 Fix Trigger Wheel
Sunday, April 05, 2015 5:53 PM
No response from him


97cavalier
Re: 58 tooth to 6-1 Fix Trigger Wheel
Sunday, April 05, 2015 5:55 PM
I should be able to get down into the $125-150 range if we get around 10 people, and around $175 for a few.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: 58 tooth to 6-1 Fix Trigger Wheel
Sunday, April 05, 2015 5:56 PM
Bryce, I never received anything also, here, facebook, or email.

Was stuck in my junk email. I'll text you tomorrow.







Edited 1 time(s). Last edited Sunday, April 05, 2015 5:59 PM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: 58 tooth to 6-1 Fix Trigger Wheel
Monday, April 06, 2015 9:10 AM
-MD- Enforcer wrote:I should be able to get down into the $125-150 range if we get around 10 people, and around $175 for a few.

I would buy 1 for either price.



"In Oldskool we trust"
Re: 58 tooth to 6-1 Fix Trigger Wheel
Thursday, April 09, 2015 4:17 AM
^^^This^^^, I really wanna run a slightly bigger Eco in the daily sedan when its 160k ass-kicking L61 (LMAO) finally goes to pasture some day.



Re: 58 tooth to 6-1 Fix Trigger Wheel
Thursday, April 16, 2015 10:57 AM
Never heard back after my last few texts...




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: 58 tooth to 6-1 Fix Trigger Wheel
Thursday, April 16, 2015 2:39 PM
Since this. Bolt on couldn't you make it two pieces then you can bolt it on without removing everything?




On the inside my car looks like a fighter jet.
Re: 58 tooth to 6-1 Fix Trigger Wheel
Friday, April 17, 2015 5:07 PM
Rob Dotterer wrote:Since this. Bolt on couldn't you make it two pieces then you can bolt it on without removing everything?

that was my plain.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: 58 tooth to 6-1 Fix Trigger Wheel
Wednesday, April 22, 2015 12:06 PM
I haven't heard anything back via hear for by text.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: 58 tooth to 6-1 Fix Trigger Wheel
Wednesday, April 22, 2015 3:48 PM
I want one PM sent!
Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, May 19, 2015 7:57 AM
Has this gone anywhere or is it dead?



Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, May 19, 2015 12:41 PM
He stopped responding to me....so I guess maybe?




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, May 19, 2015 3:10 PM
Id be in for one for 100% sure at $125-175...$300 is a bit more then id like to spend though.

Re: 58 tooth to 6-1 Fix Trigger Wheel
Wednesday, May 20, 2015 6:40 AM
I got mine recently took about 3 weeks. Looks great haven't installed yet tho.
Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, August 04, 2015 6:32 AM
Price is down to 225.00 for those interested have 10 on hand.


97cavalier
Re: 58 tooth to 6-1 Fix Trigger Wheel
Tuesday, August 04, 2015 6:35 AM
97cavalier wrote:Price is down to 225.00 for those interested have 10 on hand.


That's Shipped.


97cavalier
Re: 58 tooth to 6-1 Fix Trigger Wheel
Sunday, September 20, 2015 1:30 AM
20 ready to ship out 207 shipped


97cavalier
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search