Shop called, apparently a couple of the brand new piston rings sealed in-package that came with my Wiseco .020" over piston kit are damaged. One is broken in half and another is all rusty.. wtf?
Of course since the pistons are oversize, I won't be able to just get some locally.. where can I get .020" over LD9 piston rings ASA
MFP?
2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
@!#$, they only sell them as a whole set I just realized.
2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
I had the same problem
You can order the ring direct from wiseco part# 9050XX
Location: Montreal, Quebec
Sorry about the massive amounts of non-premium "edit" posts.
NAPA doesn't stock either of them locally at all. SOL.
2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
Ordered direct from Wiseco, only $34, including being shipped overnight.
THANKS!
2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
thank god you got the wiseco ones... really though you should have measured the ring grooves for exact size then put the order in. if you order any rings from total seal you'd better have all those measurements or you wont be getting rings for custom pistons lol
wear can enlarge the grooves too so just getting a replacement set might not be exacting.
Come join us over on the Olds Quad 4 and Twin Cam Facebook group!
they're brand new pistons. glad i got wiseco too.
i took high quality pictures of the damaged rings but i won't be able to upload til tomorrow. interesting how the moly ring rusted a bit..
2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
-Z Yaaaa- wrote:oh i wasnt aware you bought new pistons.... i thought you already had a built bottom end lol
I did... notice the "(w/major failures)" in my signature track time, heh. I messed up my fancy pistons, walls, melted the head, etc. All my fault and it will never happen again. This time it's overbored, thicker head gasket, and every surface precision machined. I had a feeling my head was cracked or pistons were damaged long before (during one of my previous head gasket jobs).
-Z Yaaaa- wrote:and $34 was just for the replacement ones that were damaged or a full set?
A set for one cylinder. $24 part price, $10 for overnight shipping. I seem to get way cheaper prices when done over the phone with Wiseco.
Here's the moly ring that was rusted straight from the sealed packaging.. very strange. Bought the set off a member on here that had them NIB sitting around.
2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
I have just various misc. extra rings, no complete sets or anything..,,
Wiseco overnighted those rings for me and one ended up being bent. So they overnighted another new set to me and they should be coming in any minute now.
2001 Olds Alero (LD9)
636 whp / 543 ft-lb
@turboalero
