wrong welder dave i need a mig welder thats a stick welder thanks for offering.... anyone else i remember when i first went to the meets someone had a welder there and was sahving i think it was chad but who knows where he went....

the welder i beleive was lurchs at that meet, but i don't remember
and i prolly won't be there sorry

^^ I dont think he was at the meet that was at Lurch's house.


You're reading my line-break, you are a loser.

naw man ive been a member for longer than u and ryan its been 2 1/2 years now i think.

hey its Wolf E Man jeez ....

1. Wolfeman
2. 04eco
3. CaviEvoStyle (Tanya)
4. BLACKPLAGUE
5. 2k Cavy (Lance) + Adam(still hasn't got on here)
6. cannon fodder (Tony)
7.CurvyJBody
8. ylime (emily) supposted to be number 3!
9. Nick
10.RatedZ (dylan)
11.David

I have a wire feed welder, not sure what the difference between welders or anything, I knew at one time but not anymore. "Short term memory loss is a bitch" lol


JHound
I took a Grey Hound bus to the 2005 GMSC Bash

http://memimage.cardomain.com/member_images/9/web/501000-501999/501209_5.jpg

a stick welder is used for more industrial applications. a tig welder (tungsten inert gas) is used typically to finish weld something. tig welding is considered the rolls royce of welding because of it's quality finish and hold. mig welding (metal inert gas) which is commonly known as wire feed welding (not all mig is wire feed though, there are some differences) is far less expensive and far easier to do. wire feed is very common because of its simplicity, and produces a decent (but typically not the best looking) weld.

and yes, i can do all three.

^ thats hot.....lol.......can i watch you do it...welding i mean...lol


<BR><IMG SRC="http://registry.gmenthusiast.com/images/ylime555/sig.jpg">
<IMG SRC="http://registry.gmenthusiast.com/images/neo32843/mnjbo2.gif"><IMG SRC="http://registry.gmenthusiast.com/images/ylime555/ylime.gif"><IMG SRC="http://registry.gmenthusiast.com/images/neo32843/mnjbo2.gif">

if anyone needs some welding done, then possibly... lol.

DREW - Your gunna be able to do it in one day?? ...won't you need more time for sanding and what not? ALso, how much will you need on the side to do it(for your work)..and the poppers too right? Send me another link for the poppers so I can make sure I get them before the meet too~ BIG PROJECT EVERYONE...Lance is gettin shaved!!!!!!!!!


how do you want the money payment for the bondo and materials???...and ur labor? send me da bill!~

+ filler plates for doors and trunk that is~

thanks again drew...
..make sure nick comes..wanna get my steering wheel in too..let him know I have his money for him too~

lance-
u need to send me the money for the plates its gunna be around 50 for them i got the welder all u need to do is the wiring... yea ill try to be there early to so if u get there around 830 it will go good i hope.. so msn me for my address to send the money to.

neoSandstorm (The Sandy One) wrote:^^ I dont think he was at the meet that was at Lurch's house.

yes that may be but we were talking about the one over a year ago, when i first joined, actually the first meet i was at chad was shaving locks for Jason

^^ yeah i just made the assumption it was the meet i was. my bad.


You're reading my line-break, you are a loser.

LamboCav wrote:lance-
u need to send me the money for the plates its gunna be around 50 for them i got the welder all u need to do is the wiring... yea ill try to be there early to so if u get there around 830 it will go good i hope.. so msn me for my address to send the money to.

50 for the plates for the handles, locks, and trunk correct? does that cover other materials too such as filler and bondo?

I'll have to hopefully get the wiring done before we shave the driver side atleast..can maybe do it while your doing the passanger door and trunk~

The welder that Chad has is mine. Otherwise, Kevin Rush has a welder, I hear he is pretty good with it too.

do i get to come??? ill bring my bunny ears... and hell yes.."short term memory loss IS a bitch" nick lmao

Dimpy: Official MN-JBunny wrote:do i get to come??? ill bring my bunny ears... and hell yes.."short term memory loss IS a bitch" nick lmao

absolutely.

roy might agree with me. cruise to Lum park! w00t!


it's gonna cost what?!?!
0MG 1 AM D157URB1NG 73H P34C3 C4U53 1 7YP3 1N 1337, LOL!!!!111!1!1

hey, anyone good at dent removal? theres a few on my car i need out


it's gonna cost what?!?!
0MG 1 AM D157URB1NG 73H P34C3 C4U53 1 7YP3 1N 1337, LOL!!!!111!1!1

drew ya e-mailed me but didn't send me your MAILING address!!

hey mike if you still have your z24 would you want to do a hood swap for my 91 sunbird hood im looking for a 2 gen Z24 hood for it

and ive never been to lum park


The one, the only, ME.

dimpy- is there a bunny suit that is involed with the ears

lance-yea get the wireing done and ill go get some prices tomarrow on the materals. send me 80 bucks and ill give u the left over cash.. drew baker 2608 fairway DR. NE willmar MN 56201

i sneaked a peek at the soon to be schedule and it looks like i have the day off but we will see im kinda excited !!! Dylan, Arlo, and Dave can Roy and I stay at your place ???


Opinions are like ***holes everyone has one.

Ok guys I think I talked my friend with the sunfire into coming so here is the new list

1. Wolfeman
2. 04eco
3. CaviEvoStyle (Tanya) + Denise (Maybe)
4. BLACKPLAGUE
5. 2k Cavy (Lance) + Adam(still hasn't got on here)
6. cannon fodder (Tony)
7.CurvyJBody
8. ylime (emily) supposted to be number 3!
9. Nick
10.RatedZ (dylan)
11.David


And this is her cardomain site so you all can check it out before hand
http://www.cardomain.com/ride/683197