GARY'S GIGANTIC SALE THREAD TO THE NORTH - Page 2 - North Central Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 07, 2008 4:30 PM
Well, I need the ECM and the engine harness only! I allready have everything else. How's $150 for both those parts?


Project Resurrection is in full swing!

Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Monday, December 08, 2008 9:38 AM
I'll vouch for the motor!!!!!!! definitely was 10x stronger and faster then Nick's (z2fst4u), and never could figure out why? Nick had a brand new engine dropped into his car, but this one(Gary's) always produced more power. VERY strong engine guys



Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Tuesday, December 09, 2008 11:59 AM
StreetDreamZz wrote:I'll vouch for the motor!!!!!!! definitely was 10x stronger and faster then Nick's (z2fst4u), and never could figure out why? Nick had a brand new engine dropped into his car, but this one(Gary's) always produced more power. VERY strong engine guys



thanks lance, i appreciate the good words. ill be heading up to MN here over break hopefully we can meet up and chill or grab a drink, im 21 now!!!






Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Tuesday, December 09, 2008 12:14 PM
Gary, on the green car, what shape are the doors in...and how much if any rust do they have. I was just looking at the lower on mine, and both doors are rusting from the inside out.....along the lower seam.


PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Tuesday, December 09, 2008 8:20 PM
what exactly are you looking for for the ecotec swap??




Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Tuesday, December 09, 2008 11:26 PM
-MD- LD9 wrote:Gary, on the green car, what shape are the doors in...and how much if any rust do they have. I was just looking at the lower on mine, and both doors are rusting from the inside out.....along the lower seam.




the green doors are fubard. both have rust and both have dents esp the drivers. sorry man.





RyZ96 wrote:what exactly are you looking for for the ecotec swap??



a new shell... price wise, idk. money talks but a new shell for it all is what im really lookin for.






Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Wednesday, December 10, 2008 7:20 AM
gmanz24 wrote:





RyZ96 wrote:what exactly are you looking for for the ecotec swap??



a new shell... price wise, idk. money talks but a new shell for it all is what im really lookin for.


you and me both buddy




Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Wednesday, December 10, 2008 10:13 AM
Found a 1996 sunfire gt for 750 it needs few things. Its auto and has a salvage title but its fixed and it need new exhaust and 02 sensore.

Here is the website:

http://v4.fivezeroseven.com/showthread.php?t=8316
Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Wednesday, December 10, 2008 5:54 PM
^^ i'm looking for a 98+ cavalier 2 door manual.. I'm going to be picky with this one, since it will be my fourth jbody and I was never really happy with any of the others..




Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Thursday, December 11, 2008 12:46 AM
RyZ96 wrote:^^ i'm looking for a 98+ cavalier 2 door manual.. I'm going to be picky with this one, since it will be my fourth jbody and I was never really happy with any of the others..



exactly same story... im pretty picky these days, ive had 3 so far and i want something specific.







Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Thursday, December 11, 2008 7:36 PM
gmanz24 wrote:
thanks lance, i appreciate the good words. ill be heading up to MN here over break hopefully we can meet up and chill or grab a drink, im 21 now!!!


LETS DO IT UPPPP




Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Saturday, December 13, 2008 8:11 PM
alright folks on with the pics since im finally on break and back home from school


the list has slimmed a bit for some good reasons

FOR SALE

2.4 turbo manifold, it's a log style and i will include the hks wastegate - offer

2.4 pacesetter ceramic coated header + magnaflow hi-flow cat. completly bolt on - $300 obo

thermal r&d catback - $300 obo

spec stage 2 clutch for 96-99 2.4 with isuzu trans - $150

Ecotec S/C kit, blower is ported, kit is almost complete, i was told it only needs injectors, a new belt, and a bracket - offer

96-99 z24 wheels and tires, gunmetal color - offer

00-02 z24 wheels and tires, 2 tires brand new - offer

brand new ebay short throw shifter 95-99 - $65

doors, fenders, mirrors, interior parts, anything is up for grabs off my 2 totalled j's, black or green. pm me with what you need and an offer,
ill take almost anything - if you come pick up stuff ill let it go for dirt!!


STILL HAVE FROM OLD THREAD

isuzu trans - $200

2.2 ecotec motor with a few bent valves - best offer

idi covers - $45 shipped each

cruise control unit - offer

2.4 icm's - $20 shipped

2.3 icm - $20 shipped

94 LO intake cam with power steering pully still attached - $45 shipped

96 driver and pass air bags with steering wheel - offer

96 2.4 intake manifold - $45 shipped

96 2.4 exhaust manifold - $45 shipped

2.4 throttle body - $45 shipped each

2.3 throttle body - $45 shipped each FOUND ONE MORE TODAY LAST ONE

90 2.3 ho injectors - make offer

96 2.4 injectors - offer

few sets of OEM 95-99 tails - $30 shipped or trade for 00-02 tails

95-99 headlights - $60 shipped

00-02 turn sigs - offer

cobalt ss badges - $5 shipped for both - pending

random cf stuff - offer

eclipse tails - $45 + ship

tires - $50

dash - $45



GONE FROM OLDER THREAD

2.4 motor with 2.3 head swap and secret cams, recently rebuilt - SOLD
2.3 HO short block has double row timing, comes without head, cams, or upper end - SOLD
secret cams - SOLD
90 2.3 ho exhaust manifold - SOLD
90 2.3 throttle body - SOLD
95-99 z24 clear lower bumper turn sigs - SOLD
95-99 z24 fogs - SOLD


here is a link to the old thread for some pics of those items click here


here are the pics as requested

GM Supercharger kit. it is not complete but it is very close.



2.4 turbo manifold and wastegate

*turbo and inspector gadget not included*








i may be saving one of these motors for my build, just testing waters

ecotec with the bent valves







extra ecotec lower end, CLEAN!!!











thermal r&d catback









pacesetter ceramic coated header



2.3 fuel rail



00-02 z wheels













95-99 z wheels







the fourth is in my other cars trunk cuz i was using it for a spare, looks the same as above

doors

there are some scuffs from the tarps that were over the car, they should easily buff/wax out
also there is some rusting but i will let the doors go for cheap

-passenger











-drivers









interior of the black car







cruise unit



fenders

-pass





tiny dent


-driver



scratch





if i forgot to take pics of something for you please remind me, i had millions of pm's to go though and its hard to keep up.







Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 14, 2008 3:09 PM
so next week end could i get that black front fender?





click sig for my car audio videos
Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 14, 2008 3:56 PM
Anton Miller wrote:so next week end could i get that black front fender?


pm'd






Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 14, 2008 4:34 PM
you'd pick up a shell??






Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 14, 2008 4:48 PM
RyZ96 wrote:you'd pick up a shell??



maybeeee



ive just got to go trailor it home now






Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 14, 2008 9:54 PM
what are you looking to get for the 95-99 z24 wheels? how far from minneapolis?



Did I mention I drive a 2000 Lumina now?-----wigm-tuners.org member
Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 14, 2008 11:01 PM
974drfire (Matt Littel) wrote:what are you looking to get for the 95-99 z24 wheels? how far from minneapolis?



wheels are in IL. pm me

1. make me an offer
2. negotiate
3. pay by paypal
4. i bring them to MN with the fender im bringin someone.


my dad lives in rogers, mn so im not far from the cities, i will def meet you in or near the cities.







Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Monday, December 15, 2008 5:41 AM
What would you want for the dash outta the black car?


Project Resurrection is in full swing!
Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Monday, December 15, 2008 9:54 AM
pm'd



Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Monday, December 15, 2008 11:08 AM
If you still have the short shifter how much will you let it go for, either one will do just pm me a price, and if you have a power door motor ill take that as well, driver side if it matters. And if you have a header for the LD9 ill be interested in that as well as some bigger cams

-Jeff



Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Monday, December 15, 2008 11:58 AM
pm'd






Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Monday, December 22, 2008 11:39 AM
black car will be gone soon, pass fender and doors are still left. i will let these items go cheap pm me please.






Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 28, 2008 12:01 PM
are you in mn yet? if you could pm when your here that would be great....





click sig for my car audio videos
Re: GARY'S GIGANTIC SALE THREAD TO THE NORTH
Sunday, December 28, 2008 12:46 PM
Anton Miller wrote:are you in mn yet? if you could pm when your here that would be great....



sorry man, i no its taking longer than expected but im almost finished with gettin the car running and ill be up there. we are trying to do something for my gf's bday that was the 23rd and i was supposed to be up for a surprise party but couldnt make it. we rescheduled and i have to be up there in the next few days.

dont worry man the fender is ready to go




ive just gotta get the car ready






Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search