03supercharged wrote:I was messing around with the computer and came up with this as an idea for my cluster, what do you guys think?
03supercharged wrote:Taetsch Z-24 wrote:Have a little to learn of LSX blocks is see...
the LQ4\LM7 that you have now, better heads then the 241's of the LS6.... HOWEVER has a bad cam and intake for how you want to make power.
What trans are you putting behind the FLEXPLATE? GM has a really nice ECM that can control that with a 4L60/4L80/4L85E trans...
Chris
Sorry, I should have specified what motor I was running, those two motors are both 5.3's, not the 6.0 LQ4's. Im running the ported 241 heads to drop my compression to be more pump gas friendly with the turbo.
I do have a 6.0 LQ9 motor sitting in a buddies garage that will be getting built into a 408 though but I havent decided if I want the run a set ot ported 317 heads or switch and run the L92 heads with the edelbrock fuel injected intake with the elbow for the thottle body ( what do you think?)
As for a trans, I have a TH400 trans that is being built as we speak.
JUCNBST wrote:only 12?.......that will last all of 75-120miles tops.....
Raptorws9 wrote:
I wouldn't wast my time on the 5.3's go straight for the 6.0. My brother put one (5.3) in his S10, then went to 6.0 and wished he had never messed with the 5.3.