GME Network  |  J-Body Organization  -  Ecotec Power  -  GM Delta
The J-Body Organization
Log In
 you are here: / home / forum
Monday, November 23, 2009 
REGISTER NOW

Parts For Sale - North Central Region Forum

Minnesota, North Dakota, South Dakota, Wisconsin specific forum.
Forum Post / Reply
You must log in before you can post or reply to messages.
Go To TopSearchOptionsRulesHelp
Previous MessageNext Message
Parts For Sale
Wednesday, October 28, 2009 10:16 AM
Web PagePhoto

Ok so heres the beginning of some parts that i have for sale ill update with new stuff later as well. Everything sold is buyer responsibility for shipping unless otherwise discussed. Also open to reasonable offers...


1. Spec alum. flywheel- needs a new center ring, can be purchased from karo@carcustoms.net $75
[IMG=http://img259.imageshack.us/img259/9376/flywheel.jpg][/IMG]

2. Cavalier plastic rad. cover $15
[IMG=http://img62.imageshack.us/img62/4889/radcover.jpg][/IMG]

3. Sunfire plastic rad. cover $15

4. 00+ Cavalier fenders with the lip rolled completely like a door skin, perfect condition came off my car when it was blue $120

5. 2.2 manual trans radiator and fan- came out of a 95 $75

6. eMS-pro stand alone ecu $400

7. Sunfire aerogear millennium body kit with fender flares $750
http://www.streetbeatcustoms.com/Aerogear/Body-Kit/Pontiac-Sunfire-Aerogear-Millennium-Series-Full-Body-Kit-With-Front-and-Rear-Fenders-_-AG_2105_BK/632129/

8. Sunfire GT side skirts- silver in color $ 100

9. Sunfire GT spoiler- silver in color $ 40

10. 95-99 Cavalier center consol- charcoal in color $40

11. 95+ Cavalier rear side panels for a coupe- charcoal in color $45

12. 00-02 z24 Cavalier spoiler- silver in color $65

13. MSD setup (dis 2 HO, msd blaster coils, msd plug wires, and custom polished coil bracket) $600
[IMG=http://img24.imageshack.us/img24/6763/msdp.jpg][/IMG]
[IMG=http://img264.imageshack.us/img264/6726/msd1.jpg][/IMG]

14. SOLD

15. Venom fuel rail with autometer gauge on the rail and aeromotive fpr $225
[IMG=http://img62.imageshack.us/img62/4930/fuelrai.jpg][/IMG]

16. Spearco intercooler with a core size of 23x10x3" with 2.5" inlet/outlet $250
[IMG=http://img264.imageshack.us/img264/2122/intercoolerr.jpg][/IMG]

17. Magnaflow stainless steel muffler 14" long x 9x5" oval, 3" center inlet/outlet $50
[IMG=http://img259.imageshack.us/img259/3810/magnaflow.jpg][/IMG]

18.NX nitrous & fuel lines 23" long $30

20. Griffin radiator for 2.4 with spal fan $400
[IMG=http://img264.imageshack.us/img264/8500/griffin.jpg][/IMG]
[IMG=http://img3.imageshack.us/img3/1162/griffin1x.jpg][/IMG]

21. Chrome ls sport wheels- needs tires $200

22. Weld magnum 15x3 w/m&h 15/3.5/24 skinnies $625

23. Rays alum. lug nuts- blue in color $50

24. RKsport Type-j side skirts $100

25. OBX header for 2200 $50

26. Custom cavalier interior, sanded and smoothed main dash, top dash with carbon fiber turbocharged z logo, door panels with diamond audio 6.5 componets with crossover in the panels as well along with the tweeters in the defronts vent, sanded and smoothed kick panels and pass. pillar, driver pillar is a single gauge pod, rear panels are stuck in the car so you would have to sand and paint yours. everything is in pretty good shape but the door panels have some stress cracks in them $600

27. Turbo setup *notice* im not sure how this fits in the factory engine bay since my firewall has been modded. right now ill list as header, dump tube, turbo back exhaust which is a straight pipe from the turbo to the megan turbo muffler. also will include the hotside chargepipes that will work with the inter cooler if you purchase that as well. silicone hoses and tbolt not included. $800





Edited 1 time(s). Last edited Wednesday, October 28, 2009 8:20 PM


R.I.P. Brian Klocke, you will never be forgotten
Advertisement
Upgrade to premium membership to remove this ad.

Re: Parts For Sale
Thursday, October 29, 2009 3:20 PM
Web PagePhoto

1. Spec alum. flywheel- needs a new center ring, can be purchased from karo@carcustoms.net $75
[IMG=http://img259.imageshack.us/img259/9376/flywheel.jpg][/IMG]

2. Cavalier plastic rad. cover $15
[IMG=http://img62.imageshack.us/img62/4889/radcover.jpg][/IMG]

3. Sunfire plastic rad. cover $15

4. 00+ Cavalier fenders with the lip rolled completely like a door skin, perfect condition came off my car when it was blue $120

5. 2.2 manual trans radiator and fan- came out of a 95 $75

6. eMS-pro stand alone ecu $400

7. Sunfire aerogear millennium body kit with fender flares $750
http://www.streetbeatcustoms.com/Aerogear/Body-Kit/Pontiac-Sunfire-Aerogear-Millennium-Series-Full-Body-Kit-With-Front-and-Rear-Fenders-_-AG_2105_BK/632129/

8. Sunfire GT side skirts- silver in color $ 100

9. Sunfire GT spoiler- silver in color $ 40

10. 95-99 Cavalier center consol- charcoal in color $40

11. 95+ Cavalier rear side panels for a coupe- charcoal in color $45

12. 00-02 z24 Cavalier spoiler- silver in color $65

13. MSD setup (dis 2 HO, msd blaster coils, msd plug wires, and custom polished coil bracket) $sale pending
[IMG=http://img24.imageshack.us/img24/6763/msdp.jpg][/IMG]
[IMG=http://img264.imageshack.us/img264/6726/msd1.jpg][/IMG]

14. SOLD

15. Venom fuel rail with autometer gauge on the rail and aeromotive fpr $225
[IMG=http://img62.imageshack.us/img62/4930/fuelrai.jpg][/IMG]

16. Spearco intercooler with a core size of 23x10x3" with 2.5" inlet/outlet $250
[IMG=http://img264.imageshack.us/img264/2122/intercoolerr.jpg][/IMG]

17. Magnaflow stainless steel muffler 14" long x 9x5" oval, 3" center inlet/outlet $50
[IMG=http://img259.imageshack.us/img259/3810/magnaflow.jpg][/IMG]

18.NX nitrous & fuel lines 23" long $30

20. Griffin radiator for 2.4 with spal fan $400
[IMG=http://img264.imageshack.us/img264/8500/griffin.jpg][/IMG]
[IMG=http://img3.imageshack.us/img3/1162/griffin1x.jpg][/IMG]

21. Chrome ls sport wheels- needs tires $200

22. Weld magnum 15x3 w/m&h 15/3.5/24 skinnies $625

23. Rays alum. lug nuts- blue in color $50

24. RKsport Type-j side skirts $sale pending

25. OBX header for 2200 $50

26. Custom cavalier interior, sanded and smoothed main dash, top dash with carbon fiber turbocharged z logo, door panels with diamond audio 6.5 componets with crossover in the panels as well along with the tweeters in the defronts vent, sanded and smoothed kick panels and pass. pillar, driver pillar is a single gauge pod, rear panels are stuck in the car so you would have to sand and paint yours. everything is in pretty good shape but the door panels have some stress cracks in them $sale pending

27. Turbo setup *notice* im not sure how this fits in the factory engine bay since my firewall has been modded. right now ill list as header, dump tube, turbo back exhaust which is a straight pipe from the turbo to the megan turbo muffler. also will include the hotside chargepipes that will work with the inter cooler if you purchase that as well. silicone hoses and tbolt not included. $800



R.I.P. Brian Klocke, you will never be forgotten
Re: Parts For Sale
Friday, October 30, 2009 7:30 AM
AOL IM

...... As long as the Wast Gate is not mounted like the last one, it should fit with out "moding" the fire wall.

Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01 MAR 08
205FWHP, 210FWTQ, STOCK PULLY
Team GREEN

Re: Parts For Sale
Friday, October 30, 2009 2:25 PM
Web PageAOL IMMSN MessengerPhoto

That turbo kit is terribly tempting....



Re: Parts For Sale
Monday, November 02, 2009 10:06 AM
Web PagePhoto

do it, ill do the intercooler, header, turbo back exhaust, dump tube and all the charge piping minus silicone hoses and t bolts for $1050



R.I.P. Brian Klocke, you will never be forgotten
Re: Parts For Sale
Monday, November 02, 2009 2:35 PM
Web PageAOL IMMSN MessengerPhoto

Oh jeez, why do you do this to me? Can you give me a bit more info on everything? Which setup exactly is this that you are selling? Forgive me, I haven't been following the JBO as much as I usually do so I don't know if you did a new setup or what. Does it include the turbo, if so which one? Does it fit with A/C?



Re: Parts For Sale
Monday, November 02, 2009 2:37 PM
AOL IM

DO IT!


Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01 MAR 08
205FWHP, 210FWTQ, STOCK PULLY
Team GREEN

Re: Parts For Sale
Monday, November 02, 2009 4:41 PM
Web PagePhoto

its the setup currently on my car, there is no turbo included nor, bov. iat sensor, wastegate, silicone hoses, t-bolts, but if you wanted that stuff to i could be arranged for another $1700 or so which would be a 35r with coated exhaust housing, tial 44mm wastegate with a 14lb spring, tial 50mm bov. i would also include the feed and drain line for 1700.




R.I.P. Brian Klocke, you will never be forgotten
Re: Parts For Sale
Monday, November 02, 2009 5:09 PM
Web PageAOL IMMSN MessengerPhoto

Why are you getting rid of your current setup? How do you have it tuned? Any way you could throw that in with it



Re: Parts For Sale
Monday, November 02, 2009 5:23 PM
Web PagePhoto

im redoing stuff, car was tuned on hpt, made 551whp. you would need to just get hpt and let ryan tune it, lol



R.I.P. Brian Klocke, you will never be forgotten
Re: Parts For Sale
Monday, November 02, 2009 5:26 PM
Web PageAOL IMMSN MessengerPhoto

So everything together would be how much? Damn you...



Re: Parts For Sale
Monday, November 02, 2009 5:45 PM
Web PagePhoto

$2750 but remember i dont know how well this fits in a stock bay, you might have to massage it to fit



R.I.P. Brian Klocke, you will never be forgotten
Re: Parts For Sale
Tuesday, November 03, 2009 5:05 AM
AOL IM

Like I said, if its not at the same angle as the one Brian got, it should fit with out the "cuts"

Luke, You know what this kit does, and the over the top qualty Brandon dose.

35R... Hot.

Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01 MAR 08
205FWHP, 210FWTQ, STOCK PULLY
Team GREEN

Re: Parts For Sale
Tuesday, November 03, 2009 7:36 AM
Web PageAOL IMMSN MessengerPhoto

This is a tough decision...it's either this or the Millermatic welder I was just about to order. grrrrr



Re: Parts For Sale
Tuesday, November 03, 2009 10:47 AM
Web PagePhoto

all im going to say is its a steal of a deal...



R.I.P. Brian Klocke, you will never be forgotten
Re: Parts For Sale
Tuesday, November 03, 2009 11:06 AM
Web PagePhoto

Ok so heres the beginning of some parts that i have for sale ill update with new stuff later as well. Everything sold is buyer responsibility for shipping unless otherwise discussed. Also open to reasonable offers...


1. Spec alum. flywheel- needs a new center ring, can be purchased from karo@carcustoms.net $75
[IMG=http://img259.imageshack.us/img259/9376/flywheel.jpg][/IMG]

2. Cavalier plastic rad. cover $15
[IMG=http://img62.imageshack.us/img62/4889/radcover.jpg][/IMG]

3. Sunfire plastic rad. cover $15

4. 00+ Cavalier fenders with the lip rolled completely like a door skin, perfect condition came off my car when it was blue $120

5. 2.2 manual trans radiator and fan- came out of a 95 $75

6. eMS-pro stand alone ecu $400

7. Sunfire aerogear millennium body kit with fender flares $750
http://www.streetbeatcustoms.com/Aerogear/Body-Kit/Pontiac-Sunfire-Aerogear-Millennium-Series-Full-Body-Kit-With-Front-and-Rear-Fenders-_-AG_2105_BK/632129/

8. Sunfire GT side skirts- silver in color $ 100

9. Sunfire GT spoiler- silver in color $ 40

10. 95-99 Cavalier center consol- charcoal in color $40

11. 95+ Cavalier rear side panels for a coupe- charcoal in color $45

12. 00-02 z24 Cavalier spoiler- silver in color $65

13. MSD setup (dis 2 HO, msd blaster coils, msd plug wires, and custom polished coil bracket) $600
[IMG=http://img24.imageshack.us/img24/6763/msdp.jpg][/IMG]
[IMG=http://img264.imageshack.us/img264/6726/msd1.jpg][/IMG]

14. SOLD

15. Venom fuel rail with autometer gauge on the rail and aeromotive fpr $225
[IMG=http://img62.imageshack.us/img62/4930/fuelrai.jpg][/IMG]

16. Spearco intercooler with a core size of 23x10x3" with 2.5" inlet/outlet $250
[IMG=http://img264.imageshack.us/img264/2122/intercoolerr.jpg][/IMG]

17. Magnaflow stainless steel muffler 14" long x 9x5" oval, 3" center inlet/outlet $50
[IMG=http://img259.imageshack.us/img259/3810/magnaflow.jpg][/IMG]

18.NX nitrous & fuel lines 23" long $30

20. Griffin radiator for 2.4 with spal fan $400
[IMG=http://img264.imageshack.us/img264/8500/griffin.jpg][/IMG]
[IMG=http://img3.imageshack.us/img3/1162/griffin1x.jpg][/IMG]

21. Chrome ls sport wheels- needs tires $200

22. Weld magnum 15x3 w/m&h 15/3.5/24 skinnies $625

23. Rays alum. lug nuts- blue in color $50

24. RKsport Type-j side skirts $100

25. OBX header for 2200 $50

26. Custom cavalier interior, sanded and smoothed main dash, top dash with carbon fiber turbocharged z logo, door panels with diamond audio 6.5 componets with crossover in the panels as well along with the tweeters in the defronts vent, sanded and smoothed kick panels and pass. pillar, driver pillar is a single gauge pod, rear panels are stuck in the car so you would have to sand and paint yours. everything is in pretty good shape but the door panels have some stress cracks in them $600

27. Turbo setup *notice* im not sure how this fits in the factory engine bay since my firewall has been modded. right now ill list as header, dump tube, turbo back exhaust which is a straight pipe from the turbo to the megan turbo muffler. also will include the hotside chargepipes that will work with the inter cooler if you purchase that as well. silicone hoses and tbolt not included. $800


msd setup back up for sale



Edited 1 time(s). Last edited Tuesday, November 03, 2009 2:32 PM


R.I.P. Brian Klocke, you will never be forgotten
Re: Parts For Sale
Tuesday, November 03, 2009 5:10 PM
Web PagePhoto

Ok so heres the beginning of some parts that i have for sale ill update with new stuff later as well. Everything sold is buyer responsibility for shipping unless otherwise discussed. Also open to reasonable offers...


1. Spec alum. flywheel- needs a new center ring, can be purchased from karo@carcustoms.net $75
[IMG=http://img259.imageshack.us/img259/9376/flywheel.jpg][/IMG]

2. Cavalier plastic rad. cover $15
[IMG=http://img62.imageshack.us/img62/4889/radcover.jpg][/IMG]

3. Sunfire plastic rad. cover $15

4. 00+ Cavalier fenders with the lip rolled completely like a door skin, perfect condition came off my car when it was blue $120

5. 2.2 manual trans radiator and fan- came out of a 95 $75

6. eMS-pro stand alone ecu $400

7. Sunfire aerogear millennium body kit with fender flares $750
http://www.streetbeatcustoms.com/Aerogear/Body-Kit/Pontiac-Sunfire-Aerogear-Millennium-Series-Full-Body-Kit-With-Front-and-Rear-Fenders-_-AG_2105_BK/632129/

8. Sunfire GT side skirts- silver in color $ 100

9. Sunfire GT spoiler- silver in color $ 40

10. 95-99 Cavalier center consol- charcoal in color $40

11. 95+ Cavalier rear side panels for a coupe- charcoal in color $45

12. 00-02 z24 Cavalier spoiler- silver in color $65

13. MSD setup (dis 2 HO, msd blaster coils, msd plug wires, and custom polished coil bracket) $600
[IMG=http://img24.imageshack.us/img24/6763/msdp.jpg][/IMG]
[IMG=http://img264.imageshack.us/img264/6726/msd1.jpg][/IMG]

14. SOLD

15. Venom fuel rail with autometer gauge on the rail and aeromotive fpr $225
[IMG=http://img62.imageshack.us/img62/4930/fuelrai.jpg][/IMG]

16. Spearco intercooler with a core size of 23x10x3" with 2.5" inlet/outlet $250
[IMG=http://img264.imageshack.us/img264/2122/intercoolerr.jpg][/IMG]

17. Magnaflow stainless steel muffler 14" long x 9x5" oval, 3" center inlet/outlet $50
[IMG=http://img259.imageshack.us/img259/3810/magnaflow.jpg][/IMG]

18.NX nitrous & fuel lines 23" long $30

20. Griffin radiator for 2.4 with spal fan $400
[IMG=http://img264.imageshack.us/img264/8500/griffin.jpg][/IMG]
[IMG=http://img3.imageshack.us/img3/1162/griffin1x.jpg][/IMG]

21. Chrome ls sport wheels- needs tires $200

22. Weld magnum 15x3 w/m&h 15/3.5/24 skinnies $625

23. Rays alum. lug nuts- blue in color $50

24. RKsport Type-j side skirts $100

25. OBX header for 2200 $50



26. Custom cavalier interior, sanded and smoothed main dash, top dash with carbon fiber turbocharged z logo, door panels with diamond audio 6.5 componets with crossover in the panels as well along with the tweeters in the defronts vent, sanded and smoothed kick panels and pass. pillar, driver pillar is a single gauge pod, rear panels are stuck in the car so you would have to sand and paint yours. everything is in pretty good shape but the door panels have some stress cracks in them $600

27. Turbo setup *notice* im not sure how this fits in the factory engine bay since my firewall has been modded. right now ill list as header, dump tube, turbo back exhaust which is a straight pipe from the turbo to the megan turbo muffler. also will include the hotside chargepipes that will work with the inter cooler if you purchase that as well. silicone hoses and tbolt not included. $800



R.I.P. Brian Klocke, you will never be forgotten

Forum Post / Reply
You must log in before you can post or reply to messages.

 

[ home | regions | premium membership | members | library | faq ]
[ events calendar | gallery | chat | classifieds | store ]
[ forums | links | teams/clubs | contact us ]

TERMS OF SERVICE   PRIVACY POLICY