I'm located just outside of hamilton, ontario. A lot of this stuff is expensive to ship, so I'll try my luck here.
96 z24 rims
Tires Falken fk451's 16/225/50. Lots of life left in them
Wheels are off of a 96 z24. I have polished them to remove some of the imperfections, but there is still some there (previous owner rubbed a curb and I couldn't get it all out). Anyways, even with the imperfections, these wheels look awesome.
Here are konig toxxins with tires. Tires are in good shape with lots of rubber left.
The rims are showing their age, as the clear coat is peeling a bit in some spots. As well, I'm missing the center orange cap (not the lugnut cover, i have all of those) on one wheel. These are genuine konig rims, not knock offs. Multi fit design 5 x 100mm and 5 115mm
Lots of info and pics about the motor on www.feavs.com
Ported upper / lower intake manifold (will come with fuel rail as well)
heres a pic of how it is now
Assembled / port and polished heads (work done by v6h.o). Will come with stock 1.6 roller rockers, custom pushrods (made by smith brothers), 3 angle valve job, and double coil valve springs. Detailed pics of the port work are on www.feavs.com. Also comes with valve covers.
Bottom end. Built by j-bodyperformance. Sealed power hypereutectic pistions (bored out to 3.2l total displacement), Reblanced rotating assembly, GM 260-h cam. This thing ran nice and smooth with no vibrations. Again, some old pics of it at feavs.com
250$. Its also comes with an engine stand good for 1000lbs. Shipping this is gonna suck, so I might try and find someone local for the bottom end.
Jbody Performance built the engine? Is that that Mev guy?
If so, it's a ticking time bomb, that you probably dumped a @!#$-ton of money into...sorry to hear.
The cav went 14.330 @ 96.37mph. I'm sure the G8 will be a bit faster...one of these days I'll get it to the track!