FL Swap Meet Post - FS-FT-WTB - Page 2 - South East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: FL Swap Meet Post - FS-FT-WTB
Tuesday, June 16, 2009 9:15 PM
Jack, Chris has 3 of those filler plates.. you might wanna see about getting him to sell you one ::shrugs::

or you could always jack one from a parking lot.. thats how I got mine for my '96 of course, my car was Corvette Red, not Victory Red so it didnt match.. so I put it back



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance

Re: FL Swap Meet Post - FS-FT-WTB
Tuesday, June 16, 2009 10:04 PM
The Black Pearl wrote:

Jack, Chris has 3 of those filler plates.. you might wanna see about getting him to sell you one ::shrugs::

or you could always jack one from a parking lot.. thats how I got mine for my '96 of course, my car was Corvette Red, not Victory Red so it didnt match.. so I put it back


No wonder why you have such problems with your cars. All the bad Karma.



FU Tuning



Re: FL Swap Meet Post - FS-FT-WTB
Wednesday, June 17, 2009 8:36 PM
I put it back on the guy's car!!! shoo bad karma, shoo

Jess, you were selling your Vibrant strut bar? the one you just had powder-coated?



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: FL Swap Meet Post - FS-FT-WTB
Friday, June 19, 2009 9:06 PM
UPDATE:

I'll sell the hood and wheels together for $900.. saves $100

OR

I'll trade the hood for a new, in-the-box Resident Evil 5 edition XBox 360 (the one thats red with a matching controller - usually runs about $400) plus $100 cash. for those of you who might get the hook-up on electronics and consoles - like if you work at a Gamestop or Best Buy - this is a deal right here or if you have decided to take up jacking semi's in your spare time



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: FL Swap Meet Post - FS-FT-WTB
Monday, June 22, 2009 6:05 AM
ok heres a small list of the @!#$ i have from the cav

4 14" steelies- one has some curb damage, will not affect the tire or balance. one is a chrysler steelie so, different design but same measurements.

4 15" steelies from a cobalt-(4x100 lugs) near mint no damage minus the normal wear and tear. i'm looking for 125 for the set

entire rear of the interior- graphite interior from a 01 cav, the rear seat has some stains i dunno if they are removeable never had a chance to try. the rear deck cover has a small broken peice on it and i believe i'm missing the child seat anchor covers. the sides are intact and in good shape 50 for everything

01 trunk with 95-99 z spoiler- great shape no damage to the metal (no dents) paint has a couple scratches and the spoiler is faded. comes with the tails inner and outter (assuming i have them) the badges have been removed minus the cavalier badge which has been trimmed to only say cav. 80 takes it all

custom base 01 front bumper- i cut out the openings and put mesh in them, looks hot ihmo. theres a scratch on the drivers side from a previous owners stupidity. 50 bucks

front headlight brackets 00-02- in great shape i bought them to replace mine since the were both destroyed. asking 30 for the pair

front and rear stock springs- no sagging when they were on the car 25 takes em

front and rear struts- not leaking and did not show signs of being blow. not sure on price so pm me. also rears might be sold already, comes with mounts



theres a lot more and i will have pics tonight after work





Edited 3 time(s). Last edited Monday, June 22, 2009 1:43 PM


ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: FL Swap Meet Post - FS-FT-WTB
Sunday, June 28, 2009 5:25 AM
Alrighty.... might aswell see what I can possibly get for this extra junk.

FS:

APC "Carbon Fiber" painted M3 Manual Mirrors - 45 obo
APC True Clear Outer Tails for Cavy - 50 obo (one socket little messed up from, thats how I got them)
Eco Cam Cover - 20
Eco Fuel Rail from 03 I believe no injectors - 50obo

I think thats it for now.... I'll have to look around.

WTB: Stock White Front Bumper or LS Sport front for 03+ Cavy in any color


http://www.motortopia.com/cavyfreak442/cars
Best ET to Date: 14.251 @ 98.51 mph. 13's or Bust Baby!
Re: FL Swap Meet Post - FS-FT-WTB
Sunday, June 28, 2009 6:18 PM
hey Fluffy, ill take those springs from ya!! i need to raise Gert in order to ship her...

sellin:
Zex dry shot for 4 & 6 cyl- i have pretty much everything ya need... maybe a few fittings are missing, idk... a friend gave me the kit and i nvr decided to install it... Make an offer..
heres the link on Zex's website of the kit i have...
http://www.zex.com/Pages/124/Dry%204%20and%206%20Cylinder.aspx

i know i got more stuff to sell... ill have to post later or something...

JHAND, just trim the underside of your hood to clear the brace... just an idea...



Myspace

Re: FL Swap Meet Post - FS-FT-WTB
Sunday, June 28, 2009 8:47 PM
KrIsToY! wrote:

hey Fluffy, ill take those springs from ya!! i need to raise Gert in order to ship her...


JHAND, just trim the underside of your hood to clear the brace... just an idea...


so i've heard, its good then 25 bucks and i wont install..... :/ i'm tired of working for free


i told her the same thing lol



ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: FL Swap Meet Post - FS-FT-WTB
Sunday, June 28, 2009 8:55 PM
lol no i gots it... i can do it wayy faster anyways!! lol... j/k



Myspace

Re: FL Swap Meet Post - FS-FT-WTB
Sunday, June 28, 2009 9:15 PM
KrIsToY! wrote:

lol no i gots it... i can do it wayy faster anyways!! lol... j/k
ouch bro lol if that was cause of the seat bs that wasnt my fault.

also to add i have srt seats dunno the price she wants though but i'll entertain offers. the drivers has a tear on the left side bolster but other then that like new

edit o ya and i have brackets for them to go in a cobalt, worked perfectly you just have to figure out the seat belts and passenger presence system


Edited 1 time(s). Last edited Sunday, June 28, 2009 9:17 PM


ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: FL Swap Meet Post - FS-FT-WTB
Monday, June 29, 2009 11:11 AM
i need a 2000-2002 from bumper ASAP!



stock eco with 110 shot <<<<<<<<<WTF???

Re: FL Swap Meet Post - FS-FT-WTB
Monday, June 29, 2009 11:36 AM
KrIsToY! wrote:

JHAND, just trim the underside of your hood to clear the brace... just an idea...
Im a lil nervous about cutting the hood, its fibgerglass -- i got another idea if i can find the bolts. Im working on it! Right now i got a GM in there, no where NEAR as strong as the Vibrant bar was!




RIP JessE -- You are not forgotten! | FaceBook | G+
Re: FL Swap Meet Post - FS-FT-WTB
Monday, June 29, 2009 11:43 AM
BlackCav04 wrote:

i need a 2000-2002 from bumper ASAP!


does it have to be in any particular condition?



Myspace

Re: FL Swap Meet Post - FS-FT-WTB
Monday, June 29, 2009 6:59 PM
JHand wrote:

KrIsToY! wrote:

JHAND, just trim the underside of your hood to clear the brace... just an idea...
Im a lil nervous about cutting the hood, its fibgerglass -- i got another idea if i can find the bolts. Im working on it! Right now i got a GM in there, no where NEAR as strong as the Vibrant bar was!


just notch it like bobby did i wont weaken it enough to do anything



ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: FL Swap Meet Post - FS-FT-WTB
Tuesday, June 30, 2009 6:20 AM
has to be decent. got pics?



stock eco with 110 shot <<<<<<<<<WTF???
Re: FL Swap Meet Post - FS-FT-WTB
Tuesday, June 30, 2009 4:18 PM
look on my myspace... i dont have access to get new pix right now...



Myspace

Re: FL Swap Meet Post - FS-FT-WTB
Tuesday, June 30, 2009 8:32 PM
damn Josh, where ya been hiding?

I want some knowledge on air ride.. and you the man



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: FL Swap Meet Post - FS-FT-WTB
Tuesday, June 30, 2009 8:37 PM
does someone still need a filler plate. Ihave a black z24 one
Re: FL Swap Meet Post - FS-FT-WTB
Wednesday, July 01, 2009 5:13 AM
^^Yes, how much?




RIP JessE -- You are not forgotten! | FaceBook | G+
Re: FL Swap Meet Post - FS-FT-WTB
Wednesday, July 01, 2009 2:42 PM
Is this going to turn into a bidding war?

I PM'ed him about it this morning.






Re: FL Swap Meet Post - FS-FT-WTB
Thursday, July 02, 2009 10:13 PM
civil j-body war is not good...



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance

Re: FL Swap Meet Post - FS-FT-WTB
Friday, July 03, 2009 5:42 AM
i've been busy with work(2 jobs), no need for a bumper got one new $80 bucks!



stock eco with 110 shot <<<<<<<<<WTF???
Re: FL Swap Meet Post - FS-FT-WTB
Sunday, July 05, 2009 11:01 AM
with that air ride kit you got, can you dampen it so you dont hop for 2 miles after hitting a bump?



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: FL Swap Meet Post - FS-FT-WTB
Sunday, July 05, 2009 6:09 PM
yes i believe there are 6 different dampening settings, the ride is not bad. It does take a little getting use to



stock eco with 110 shot <<<<<<<<<WTF???
Re: FL Swap Meet Post - FS-FT-WTB
Monday, July 06, 2009 5:24 AM
Take it to pm's Evan. FS/FT ...


I have an R-Active front strut bar, looks great. $40.





RIP JessE -- You are not forgotten! | FaceBook | G+
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search