z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09) - Page 5 - South East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Friday, November 20, 2009 10:13 AM
sweet.. Torres FTW

you gonna be at Omar's tomorrow or you need a ride still?



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance

Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Friday, November 20, 2009 10:26 AM
I think Jess is supposed to pick me up tomorrow morning, I dont know if she still is.



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Friday, November 20, 2009 12:50 PM
Torres @ SpeedZone wrote:Ok guys Im parting out my 96 z24 plus many extras I have obtained over the years... sale so i will update later on...everything is OBO unless there is a price.

PRICING DOES NOT INCLUDE SHIPPING

- Electric Trunk Release - OBO

- LD9 IDI, used, it works fine and is clean - OBO

- LD9 IDI Cover - OBO
PIC

PIC 2

- ALL SUNROOF PARTS, including motor - OBO

- Full z24 interior with a 03+ Center console, everything is charcoal/graphite. The seats have the z24 red speckle stuff on it. - OBO

- Headliner with sunroof charcoal/graphite - OBO (dont lowball me)

- Rare cavalier under dash (goes above foot pedals, blocks view of cables etc under the dash) - OBO PIC SOLD & SHIPPED

- 2.4 EGR Block off plate - OBO I know what these go for so make good offer lol

- Brand new passenger side window motor, used once just to test - $20

- z24 Stage 3 Spec Clutch (Must help me drop the transmission if you want it LOCAL PICK UP ONLY) - $300 OBO

- 95-99 Short throw shifter (Needs some cleaning/lube, other than that its nice) - OBO no lowballing

- z24 5 spd Transmission about 130K on it (LOCAL PICK UP ONLY MUST HELP ME REMOVE) - OBO

- LD9 2.4 L Motor, blown headgasket (LOCAL PICK UP) - OBO

- Auto Meter Ultra-Lite Air Fuel Gauge - 50 OBO PICTURE

- Auto Meter Volt Gauge - $20 OBO PICTURE SOLD & SHIPPED

- Koni Red Adjustable Shocks on cut Goldline springs (beautiful ride) - $350 OBO NO LOWBALLING

PICS OF DROP/ STANCE:
DROP 1

DROP 2

- GM Strut bar with two spots to drill into the firewall - $50 OBO (PREFER LOCAL PICK UP) PIC

- OBX FMU - $100 OBO PIC

- 2.4L T3/T4 Turbo downpipe; custom made t3/t4 downpipe it will bolt right on its basically brand new, if youre going to keep your A/C your A/C will need some custom lines to go around the downpipe, make best offer on price, I paid over $200 to get it made. PICS UPON REQUEST!

- z24 Injectors - OBO PIC

- (2) LD9 Fuel Rail - OBO PIC SOLD & SHIPPED
GOT ONE MORE FUEL RAIL LEFT!

- LD9 COIL PACKS Brand New (2 sets = 4 Coil packs)) - OBO PIC BOTH SETS LOOK THE SAME, COMES WITH WHOLE ASSEMBLY

- Brand New Coil Housing - OBO PICSOLD

- Blitz DUAL - SBC Spec S High Performance Digital Boost Controller - $300 OBO SPECS
PIC
- HKS SUPER AFR - $130 OBO PIC

- z24 Filler Plate - $50 OBO SOLD

- 4 Pods with A pillar included - OBO PICS SOLD - EVAN


EVERYTHING UPDATED 11/19/09!!! NEW PARTS ADDED


BUMP TELL YOUR FRIENDS



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Friday, November 20, 2009 9:29 PM
ok man, I'll be heading down in the later afternoon... if you need a pick-up, lemme know ahead of time so I can plot my course accordingly



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Sunday, November 22, 2009 9:34 AM
You still have ebrake handle assembly? Mine just broke today



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Sunday, November 22, 2009 11:35 AM
The whole ebrake is still there if u need it bro



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Sunday, November 22, 2009 10:56 PM
Yeah took out my console the stupid clip broke that keeps it in place so i need the whole handle wheres the car at now?



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Monday, November 23, 2009 9:11 AM
it is at my house in Poinciana, ill be there this weekend if you wanna meet up




Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Monday, November 23, 2009 9:54 AM
when I Paypal you the money for the HIDs, ill include the 20 for the pod.. jus givin you a heads up



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Tuesday, November 24, 2009 6:13 PM
still waiting on paypal info so i can send you loot for the window motor.



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Wednesday, November 25, 2009 6:58 AM
oh sorry guys lol and Evan thats fine MATorres86@gmail.com

I need the bulb size and temperature that u need, also if you can evan include $2 for paypal fees




Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Wednesday, November 25, 2009 7:08 AM
Just send it as a gift and the receiver doesnt have to pay and paypal fees. The sender does.




RIP JessE -- You are not forgotten! | FaceBook | G+
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Wednesday, November 25, 2009 7:41 AM
I did not know that oh shizzle!!! Evan and Gil you know what to do!



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Thursday, November 26, 2009 1:07 AM
I dunno what bulb size.. ? someone know? and temp, I dunno.. get the ones that look like Jess' and Fluffy's



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Thursday, November 26, 2009 7:41 AM
9007 and 8k.



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Thursday, November 26, 2009 12:59 PM
griderusmc( da beaner ) wrote:9007 and 8k.




ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Thursday, November 26, 2009 7:45 PM
I didnt think HID bulbs used the same size numbers... then yea, '00+ uses 9007s

8k's seem to be the consensus



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Monday, November 30, 2009 4:46 AM
Mike PM me the address you what the Cover sent back to.....it came back Saturday, and the box was TRASHED. I put it in a new box, cover is fine. Will be sent USPS and not UPS this time.







PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Monday, November 30, 2009 11:27 AM
^^ ups dont give a flying @!#$ about anything.
I sent that box out in mint condition.

You should see some of the @!#$ i get at work from ups each day.

We sent out a 3000$ straight rail it came back in the shape of an L you tell me they really care about how well they do their job....


5 seconds to find another street...


Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Monday, November 30, 2009 1:36 PM
sadly enough, FedEx isn't any better.. we had them ship a box f/ my ex wife's mom in CA to our house in Ocala, and they dropped it off at the wrong house. mind you, I lived in the ghetto, so we obviously never got it back.. lost about $5k worth of stuff, not to mention sentimental items. and the driver jus shrugged it off like it was no big deal.. come to find out, the house she dropped it off at was her cousin's house, and they had the nerve to display items from the box in their house (like a set of black and purple velvet curtains)



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Monday, November 30, 2009 1:57 PM
The Black Pearl wrote:sadly enough, FedEx isn't any better


x2






Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Monday, November 30, 2009 5:07 PM
wow, it looks like you got t-boned by a Mack truck



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Tuesday, December 01, 2009 4:25 AM
Casper....since I have heard nothing from mike.....do you have an address.....





PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Tuesday, December 01, 2009 6:03 AM
PM'd sorry i've been really sick



Re: z24 PART OUT LOTS OF PARTS FOR SALE!!! (UPDATED 11/7/09)
Wednesday, December 02, 2009 10:20 AM
My MSD Dis-2 is for sale, most of the wiring is included - Make an offer!



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search