Install Meet - Oct 9th - Clermont, FL - Page 2 - South East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 10:19 AM
Lmfao Even!




RIP JessE -- You are not forgotten! | FaceBook | G+

Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 10:21 AM
Evan Undead (Team Cybergeist) wrote:you havent had Dani's pancakes *rubs tummy* they're so good, it makes her decision to trade in the Cavi for a Lancer forgivable



its gonna take alot of pancakes to forgive that lol. possibly even a steak



Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 11:34 AM
true that.. I havent had her steak before, just Jason's and Omar's. BBQ meets FTW



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 12:00 PM
LooKs like I'll be sittin this one out. Sorry guys



Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 12:05 PM
Funny you say that mike..


5 seconds to find another street...


Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 5:30 PM
Whats so funny? And whats it to you?

griderusmc( da beaner ) wrote:
Evan Undead (Team Cybergeist) wrote:you havent had Dani's pancakes *rubs tummy* they're so good, it makes her decision to trade in the Cavi for a Lancer forgivable



its gonna take alot of pancakes to forgive that lol. possibly even a steak
Haha, well the grill tanks are full, so bring some steak and you can have your steak!
Who else is bringing parts to install?







RIP JessE -- You are not forgotten! | FaceBook | G+
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 5:31 PM
well it depends on what i got but i might have some nice new toys to install





RIP JESSE GERARD.....Youll always be in my thoughts and prayers...



Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 5:34 PM
You too?
So this is a Toyo meet then? Lol



RIP JessE -- You are not forgotten! | FaceBook | G+
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 12, 2010 5:35 PM
quote=Evan Undead (Team Cybergeist)]you havent had Dani's pancakes *rubs tummy* they're so good, it makes her decision to trade in the Cavi for a Lancer forgivable
Hey now! Leave my new baby alone! Lol. Its a nice reliable 'mommy' car, its fits the job profile!!!

griderusmc( da beaner ) wrote:
Evan Undead (Team Cybergeist) wrote:you havent had Dani's pancakes *rubs tummy* they're so good, it makes her decision to trade in the Cavi for a Lancer forgivable


its gonna take alot of pancakes to forgive that lol. possibly even a steak


Hey now! You saw the car, its not terrible! lol. And mhmmm steakkkk! I think i could make that happen
Re: Install Meet - Oct 9th - Clermont, FL
Monday, September 13, 2010 6:00 PM
Crepes!!



14.4 @ 101 Bradenton Motorsports Park 11/22/08
Re: Install Meet - Oct 9th - Clermont, FL
Saturday, September 18, 2010 7:41 AM
*bump!

Stuffed french toast! Mmmm, im hungry!





RIP JessE -- You are not forgotten! | FaceBook | G+

Re: Install Meet - Oct 9th - Clermont, FL
Saturday, September 18, 2010 9:25 AM
seriously, you should plan an install meet a lil after New Years



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Install Meet - Oct 9th - Clermont, FL
Saturday, September 18, 2010 10:27 AM
I usually have one after new years and everyones done shopping from their Christmas monies.



RIP JessE -- You are not forgotten! | FaceBook | G+
Re: Install Meet - Oct 9th - Clermont, FL
Saturday, September 18, 2010 11:02 AM
cool.. I got gauges and HIDs that the Pearl is begging me for, and we all know how much I hate wiring



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Install Meet - Oct 9th - Clermont, FL
Saturday, September 18, 2010 4:26 PM
HIDs are easy dude. the easiest thing to do



Re: Install Meet - Oct 9th - Clermont, FL
Saturday, September 18, 2010 4:48 PM
maybe for you, Wire Wizard.. just stick me in a seat with a steering wheel and a shifter and watch me shine



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 11:28 AM
hahaha, shoulda brought the car over



Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 1:18 PM
Evan, how'd things go at Gils today? I saw the pics, looking good
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 6:00 PM
thank you Ms. Dani

the run-down so far.. the wiring for the air compressor that powers the trainhorns was fried. and by fried, I mean melted to almost nothing and it even got so hot that it burned into the main power cable for the battery (the one that runs to the underhood fuse panel). it even scorched the side of the battery.. also, the pump for the compressor is shot all to hell. it threw a rod, literally lol

the halos dont work anymore. half of the driver's side halo ring is out and the passenger side doesn't work at all. that really sucks cause I always thought they were evil looking.. one of the main reasons I wanted Gert in particular. the HIDs are good tho.. they always worked for me tho. we got the gauges straitened out too. the Streetglow kit is working and now wired to the toggle that powered the halos.. the front tube wont come on, but the rest of them are perfectly fine. we ran outta time or else I'm sure Gil woulda got that fixed as well

much appreciated, my beaner friend. like I said, I got your back when you need help with the black car.. just lemme know when



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 6:08 PM
As always you're welcome
And well at least you got SOME stuff sorted. Epic fail on the halo's though! I think jess has LED's for under the car...they are sitting in HalfPint's closet out on the porch.....they were kristoys originally i do believe lol
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 6:10 PM
interesting.. hrmm.. I know Gil wants to take a crack at that front tube. he seems to enjoy a challenge based on watching him mess with that air comp today lol. I'll talk to Jess in the meantime.. I'd really like to talk to Blue about the Axis wheels from the white car...



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance

Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 6:12 PM
Lol, sounds good.....she's watching Family Guy right now..........maybe text her later haha
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 6:19 PM
Lmao that's great..... I watched a kid last night melt a 8 gauge wire to his intake, battery, and struttower... that thing was the brightest red I ever saw a wire get



ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 7:45 PM
its not good times, Fluff. it actually angers me since it wasn't Kris' doing either..



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Install Meet - Oct 9th - Clermont, FL
Sunday, September 19, 2010 7:50 PM
Fluffy wrote:Lmao that's great..... I watched a kid last night melt a 8 gauge wire to his intake, battery, and struttower... that thing was the brightest red I ever saw a wire get



i was there for this as well lol





RIP JESSE GERARD.....Youll always be in my thoughts and prayers...



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search