Lots of Ecotec turbo parts and engine internals - South East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Lots of Ecotec turbo parts and engine internals
Sunday, September 18, 2011 8:30 PM
All the images are below. I have lots of things not used at all.

Mitsubishi 20g turbo with internal wastegate and ZERO miles (the one Hahn sells): $625
T3 Turbo Manifold (Fits the turbo): $70
TIAL 38mm iirc wastegate with ZERO miles: $185
Glowshift Boost, Oil Pressure, and Fuel Pressure Gauges with senders: $100
JBody strut tower brace with firewall mount: $35
Intercooler with 2.5" in/out with ZERO miles: $50
80# Injectors that work beautifully: $155
Box of 2.5" charge piping never used: $50
2 bar map sensor and I'll include the injector harness: $25
Wiseco 80mm (stock bore) pistons (set of 3, the 4th one broke): $265
Eagle rods (set of 4): $240
86mm Wiseco Piston Rings new in package: $20
Stock head with LSJ valves and Supertech valve train (recently assembled by NAPA ready to run): $375
JBody rear strut tower brace: $20
Stock throttle body: $20
2.2 Valve Cover with breather holes drilled into it: $25
Pair of 14" (I think) drag radials with good tread on them in a 5x100 bolt pattern: $100
Spec Stage 3 (I think +) Clutch: Not sure on the mileage, but it has Spec's infamous issue with the engagement point: $100
Tsudo 4-2-1 header: $95

The turbo will come with all the oil fittings as well as the dump tube. I think I even have an extra oil pan laying around that I'll throw in the box.

I will bundle to an extent, but I feel like these prices are super reasonable. If you have any questions, please post in this thread so they may be answered for everybody's benefit.

Thing I will need:
Stock head in good condition.
Stock rods/pistons in good condition.
















Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 4:45 AM
pm sent bout gauges


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 6:20 AM
t3 turbo manifold for the eco right?



Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 6:29 AM
PM Sent About FMIC





"A car just isn't a car without a little blood, sweat, and beers." -- Shadowfire
Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 7:08 AM
Where are you at?



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 7:39 AM
Kyle aka evilcom123 wrote:

t3 turbo manifold for the eco right?

Yep.


PM's replied to.
Gauges pending.
Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 7:42 AM
Evan Undead (The Black Pearl) wrote:

Where are you at?


Spring Hill, TN


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 9:12 AM
Oh poop... Can you post more pics of the turbo manifold?



R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Re: Lots of Ecotec turbo parts and engine internals
Monday, September 19, 2011 5:54 PM
Admiral Jedi wrote:

All the images are below. I have lots of things not used at all.

Mitsubishi 20g turbo with internal wastegate and ZERO miles (the one Hahn sells): $625
T3 Turbo Manifold (Fits the turbo): $70
TIAL 38mm iirc wastegate with ZERO miles: $185 - SOLD
Glowshift Boost, Oil Pressure, and Fuel Pressure Gauges with senders: $100
JBody strut tower brace with firewall mount: $35
Intercooler with 2.5" in/out with ZERO miles: $50
80# Injectors that work beautifully: $155
Box of 2.5" charge piping never used: $50
2 bar map sensor and I'll include the injector harness: $25
Wiseco 86mm (stock bore) pistons (set of 3, the 4th one broke): $265
Eagle rods (set of 4): $240
86mm Wiseco Piston Rings new in package: $20
Stock head with LSJ valves and Supertech valve train (recently assembled by NAPA ready to run): $375
JBody rear strut tower brace: $20
Stock throttle body: $20
2.2 Valve Cover with breather holes drilled into it: $25
Pair of 14" (I think) drag radials with good tread on them in a 5x100 bolt pattern: $100
Spec Stage 3 (I think +) Clutch: Not sure on the mileage, but it has Spec's infamous issue with the engagement point: $100
Tsudo 4-2-1 header: $95

The turbo will come with all the oil fittings as well as the dump tube. I think I even have an extra oil pan laying around that I'll throw in the box.

I will bundle to an extent, but I feel like these prices are super reasonable. If you have any questions, please post in this thread so they may be answered for everybody's benefit.

Thing I will need:
Stock head in good condition.
Stock rods/pistons in good condition.

Re: Lots of Ecotec turbo parts and engine internals
Tuesday, September 20, 2011 3:04 PM
Admiral Jedi wrote:

Admiral Jedi wrote:

All the images are below. I have lots of things not used at all.

Mitsubishi 20g turbo with internal wastegate and ZERO miles (the one Hahn sells): $625
T3 Turbo Manifold (Fits the turbo): $70 - SOLD
TIAL 38mm iirc wastegate with ZERO miles: $185 - SOLD
Glowshift Boost, Oil Pressure, and Fuel Pressure Gauges with senders: $100
JBody strut tower brace with firewall mount: $35
Intercooler with 2.5" in/out with ZERO miles: $50
80# Injectors that work beautifully: $155
Box of 2.5" charge piping never used: $50
2 bar map sensor and I'll include the injector harness: $25
Wiseco 86mm (stock bore) pistons (set of 3, the 4th one broke): $265
Eagle rods (set of 4): $240
86mm Wiseco Piston Rings new in package: $20
Stock head with LSJ valves and Supertech valve train (recently assembled by NAPA ready to run): $375
JBody rear strut tower brace: $20 - SOLD
Stock throttle body: $20
2.2 Valve Cover with breather holes drilled into it: $25
Pair of 14" (I think) drag radials with good tread on them in a 5x100 bolt pattern: $100
Spec Stage 3 (I think +) Clutch: Not sure on the mileage, but it has Spec's infamous issue with the engagement point: $100
Tsudo 4-2-1 header: $95

The turbo will come with all the oil fittings as well as the dump tube. I think I even have an extra oil pan laying around that I'll throw in the box.

I will bundle to an extent, but I feel like these prices are super reasonable. If you have any questions, please post in this thread so they may be answered for everybody's benefit.

Thing I will need:
Stock head in good condition.
Stock rods/pistons in good condition.

Re: Lots of Ecotec turbo parts and engine internals
Thursday, September 22, 2011 10:45 AM
money sent for gauges


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)

Re: Lots of Ecotec turbo parts and engine internals
Monday, March 26, 2012 4:09 PM
how much just for the fuel psi gauge
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search