Have a set of seam welded control arms with factory bushings and ball joints, Pulled them off my car and the ball joints were still good to my knowledge. I would suggest putting polly bushings and new ball joints for maximum increase but they can bolt right in.
Would like to get $50 plus shipping on them.
Info on them:
Normal control arms are just stamped metal. on all of the edges i welded them up so that they are more rigid and solid. I used stitches instead of really long welds to keep distortion down and if a long weld ever cracks, the entire weld is done. Stitches if one cracks you still have all the other ones. These, unlike the aluminum control arms, require no modification. They are stock parts.
- Attachments
- 0310141652b.jpg (266k)
0310141652.jpg (221k)
0310141652a.jpg (273k)
