huge for sale post ecotec perfomance parts, body parts, and much more - Mid East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 12:04 PM
time to get rid of some @!#$..

rksport cf throttle body cover professionally cleared
$50

custom carbon fiber ignition cover 2 layers of cf and has been professionally cleared 1 of 5 i believe



custom carbon fiber dimmer panel without fogs - $30


custom carbon fiber manual mirror sails $100






fiberglass bc rear bumper unpainted still in gelcoat


2 95-99 spoilers1 manta green 1 black



bomex sideskirts they are fg and are brand new in gelcoat



95-99 rear bumper


xenon rear bumper

E


polished rsm 62mm throttle body for ecotec $150




spec stage 2 clutch for 2.4 less than 1k miles $300

Precision 6262sp turbo, tial 44mm wastegate, turbo header, 2 piece downpipe with vband flanges, flex section, and cherry bomb. Custom downpipe made of stainless steel, tig welded by a professional. Turbo, wastegate, and downpipe have less than 100 miles on them. $2000















Aluminum intake manifolds + 75 mm throttle body. Have 2 $500 each







Built head. Comp turbo cams, supertech dual valve springs, stainless steel valves, stock porting. has a few thousand miles. $1100


I can part out the head if there is interest in each part

Wiseco pistons, set is used $300



Eagle rods $250

Darton sleeved blocks. One has no miles, one has a few thousand -pm for pricing

MSD DIS2 box, with coils, ready to install $500

2 Msd inline fuel pumps $75

Begi fmu with tapped fuel rail, and all fittings $500



Siemen deka 80lb injectors, 2 sets. Used set has ev6 connectors, one set has ev1 connectors. Have ev6 harness that comes with injectors, and have ev1 plugs for you to connect to your harness
Used set 150, new set 200



Custom tubing inc 3’’ exhaust, brand new $200


Neutral balance shafts, 2 sets $275 each


Hardened oil pump gears $275

Greddy profec spec II $250


Koni yellows and sportline springs $600

18’’ Axis reverbs, one has a little curb rash, two tires are decent, two suck $500





17’’ Enkie rsv, two tires good, two tires almost brand new, wheels in great shape $700



17’’ g force racing, 10 spoke wheels, brand new tires $700, or $250 without tires


Innovate lm-1 wideband with db red gauge $250
Innovate lm-1 wideband with db blue gauge $250

Erebuni v3 carbon fiber hood $500


Turbosport carbon fiber hood, pretty much brand new $700


Rust hood


Supercharger off 07 cobalt w/ 12k miles, just the charger $350


Nwf brake swap. Drilled rotors, have it all $800



Aem meth kit. Brand new, half installed, but never used $250


Another turbo header, made for a special turbo which I don’t have $400





if someone wants something, and wants it powder coated, like one of the intake manifolds, or the calipers or something small like that, let me know and we can work something out






Edited 5 time(s). Last edited Wednesday, October 13, 2010 9:24 PM



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 1:23 PM
WOW, who's car did this stuff come off of? And you damn Eco owners better jump on all this @!#$!! Good stuff here.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 1:45 PM
WHITECAVY wrote:WOW, who's car did this stuff come off of? And you damn Eco owners better jump on all this @!#$!! Good stuff here.


half paul's, half ben's (silverjon1nines). ben never pays attention to forums to get his stuff sold


have you read the RULES yet?
my carDomain updated 6/11/10 Forged and Supercharged


Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 2:15 PM
Dang, did not know Ben had all that stuff done.

Ah well, GLWS though guys, I like those 10 spoke rims.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 3:42 PM
buy them brand new tires! I need money bad

yeah i stay pretty low key. no one really knows me except the people around here



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 4:05 PM
I wants everything but no moneys glws!!!


peformance parts for sale!! Click:
http://www.j-body.org/classifieds/engine/62265/
Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 4:32 PM
dibs on the tb and the cf ign cover. pmd on it



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 4:34 PM
Everyone buy this stuff...


.
.

Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 5:17 PM
pm'ed


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 5:37 PM
Ben D(Silver J on 1Nines) wrote:buy them brand new tires! I need money bad

yeah i stay pretty low key. no one really knows me except the people around here


Did i read that correct, only 250 Minus tires for those 10 spokes? And what is the offset of them?

Oh, and id be all over that turbo header if it was an LD9 one lol










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 5:44 PM
I would be all over the erebuni..but I only have 350...god damnit Paul!! WHere was this @!#$ when I had 3 grand to spend





Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 6:52 PM
WHITECAVY wrote:
Ben D(Silver J on 1Nines) wrote:buy them brand new tires! I need money bad

yeah i stay pretty low key. no one really knows me except the people around here


Did i read that correct, only 250 Minus tires for those 10 spokes? And what is the offsetLon them?


They are my old rims lol 17x7 +35... They are almost identical to my current rims..



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 7:11 PM
Chuckles2002 wrote:I would be all over the erebuni..but I only have 350...god damnit Paul!! WHere was this @!#$ when I had 3 grand to spend


it was sitting in my garage collecting dust. buy it, it's a sexy hood



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 7:23 PM
Grr, If I knew that you were selling the TS hood..I would've bought it in a second!!!!! damn hiding parts people!




Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 7:27 PM
the erebuni is a lil cheaper. not as rare as the turbosport. buy one of them!



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 7:47 PM
i only have 350 spending cash left




Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 7:52 PM
save up a lil more and u can get one!



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 8:18 PM
WHITECAVY wrote:
Ben D(Silver J on 1Nines) wrote:buy them brand new tires! I need money bad

yeah i stay pretty low key. no one really knows me except the people around here


Did i read that correct, only 250 Minus tires for those 10 spokes? And what is the offset of them?

Oh, and id be all over that turbo header if it was an LD9 one lol


that turbo header at the very bottom, you could probably cut off the eco flange and weld a 2.4 flange on it. id let it go relatively cheap (cheap for a turbo header)



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 8:34 PM
bluedriftcavy(a.k.a. wayne) wrote:dibs on the tb and the cf ign cover. pmd on it

Next on list for the ign cover, possibly, if it doesn't work out, lol.

-Seth



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 8:39 PM
Holy hell.

Hard times or just moving on?



Proud member of Jbody of Kentucky ... Click on sig to go!
Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 8:43 PM
both...




Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 9:25 PM
Ben D(Silver J on 1Nines) wrote:both...


i call bullsh!t. you have 2 cars and a bike and live at home. grow some balls and finish a @!#$'n car.


have you read the RULES yet?
my carDomain updated 6/11/10 Forged and Supercharged


Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 9:36 PM
says the guy that hasnt had a blown up motor in......well, ever...

i have 5 cars, and a bike, and have spent 20grand on them in the last two years... sooooo its time to sell some parts and cars to get some money so maybe i can move out of my parents house when i get out of school



Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 9:49 PM
damn you Ben, I really hate you...if you had thrown all this up here about 2wks ago..the turbo kit, and either hood would have sold in minutes




Re: huge for sale post ecotec perfomance parts, body parts, and much more
Tuesday, October 05, 2010 10:02 PM
rewind 2 week... ill let you borrow my time machine



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search