FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE - Mid East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Thursday, August 09, 2012 3:33 AM
Picked this up in another package deal.

I sort of wanna keep the cams, not necessarily the head, but I'll sell both for $1200. Cams still on head with gears. Can have pictures in a few days when my darn cable comes in the mail. Had 3K on the head before rods started slapping, then he decided to call it in. I verified this through contacting suppliers claiming to be him lol. If it has more than 3k, he only owned it for 4 months, and I'm guessing there was some build time in there.

-Patriot Stage 2 Head (these ports are friggin' huge. I'm pretty sure it has upgraded springs too. All have to double check, unless someone knows how to tell. I can pull one off.
I'll throw in a used copper head gasket.
$600 OBO

Turbo grind comp cams.
$650 OBO

When I say OBO, I really mean best offer. I need this stuff moved ASAP. Shop funds are low, and my deal for an air compressor is only good for a few more days at the pawn shop.
If you're close by email me to come check it out. If your sorta far, email me you're phone number and I can probably message you pics a day before I put them here.

Will ship, just the head is probably going to be 40-50 in the tri-state (Ohio-ish). Most likely a $10 crate fee too... for good measure.



I should use this for my winter build, but I'm probably going to do a L61/LSJ hybrid, I need the cam sensor to run my stand alone, and it would be a shame to hack up this beautiful head.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Saturday, August 11, 2012 3:58 PM
Everything in my other thread is gone. Sold or holding onto it. Sorry for the double thread. Mod: lock the other one plz.

Turbo grind cams sold.

Still have Prices dropped:
-$500 picked up ---Patriot head
- $675 picked up---Built short block, will part out/ship the goodies
Weisco pistons .020 8.9:1
Eagle rods



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Sunday, August 19, 2012 6:04 AM
you still got the head and is it new or used?
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Tuesday, August 28, 2012 7:03 PM
Still have head.
Used 3k miles, some carbon buildup from running lean/rich.


NEED IT GONE PLEASE MAKE AN OFFER
COMP CAMS:
$325 shipped anywhere in the US. (only firm for sale)

Patriot Head: $500 + shipping

Eagle Rods: $300 SHIPPED

Weisco Pistons: $400 SHIPPED

Rods/Pistons are still together in block... BOTH: $600 shipped


Will ship cams within 2 days of payment
Pistons/rods within 3 days.





Edited 1 time(s). Last edited Tuesday, August 28, 2012 7:29 PM


I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Thursday, August 30, 2012 10:08 PM
rods and pistons are way too high in price. ESP being used.
should be sold together for 300$ if that.. not many people would want to trust used parts like that.
atleast not me..
head seems ok, but when you can get an lsj head for under 300$ patriot seems pointless.


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Saturday, September 01, 2012 5:11 AM
Matt Gorman wrote:

rods and pistons are way too high in price. ESP being used.
should be sold together for 300$ if that.. not many people would want to trust used parts like that.
atleast not me..
head seems ok, but when you can get an lsj head for under 300$ patriot seems pointless.


i know i would pay 300 for the pistons and rods....
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Wednesday, September 05, 2012 11:23 AM
I paid $369 for the pistons and $245 for the rods brand new so yeah you may want to lower the price. And not to mention you only paid $375 for the complete shortblock when you bought it off me. Normally I wouldn't make this post but every part I've sold you, you turned around and asked double.


If your interested in custom aluminum tilt wheel levers hit me up!
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Wednesday, September 05, 2012 11:50 AM
Realign that price on the heads and I will buy it!!!



Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Wednesday, September 05, 2012 12:04 PM
boostedeco wrote:

I paid $369 for the pistons and $245 for the rods brand new so yeah you may want to lower the price. And not to mention you only paid $375 for the complete shortblock when you bought it off me. Normally I wouldn't make this post but every part I've sold you, you turned around and asked double.


it doesnt exactly matter what you sold it to him for. if he wants to try and sell it for more, thats up to him. Odds are people wont buy it at the higher prices then they will tell him that. You dont sell a car to the dealership for them to sell it for what you paid for it.


Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Wednesday, September 05, 2012 7:02 PM
i just changed my name wrote:

Matt Gorman wrote:

rods and pistons are way too high in price. ESP being used.
should be sold together for 300$ if that.. not many people would want to trust used parts like that.
atleast not me..
head seems ok, but when you can get an lsj head for under 300$ patriot seems pointless.


i know i would pay 300 for the pistons and rods....


Sure, I need money for school.

howabout $350, for the set?

jason norwood wrote:

Realign that price on the heads and I will buy it!!!


$350 Firm. w/o cams.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Wednesday, September 05, 2012 7:05 PM
boostedeco wrote:

I paid $369 for the pistons and $245 for the rods brand new so yeah you may want to lower the price. And not to mention you only paid $375 for the complete shortblock when you bought it off me. Normally I wouldn't make this post but every part I've sold you, you turned around and asked double.


These are from a different block. The internals have 3k on them with a hahn stage 2.

I'm keeping your block for my build, this guys block had a timing chain issue.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Friday, September 07, 2012 10:56 AM
So any details known on.whats in this.head? Stock valves an springs? Just port work?
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Friday, September 07, 2012 11:01 AM
So any details known on.whats in this.head? Stock valves an springs? Just port work?
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Friday, September 07, 2012 11:54 PM
It's a patriot 2 head. They stopped making them a while back. Intake port job, and dual valve springs along with 1mm oversize valves I believe.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Saturday, September 08, 2012 10:46 PM
correct^


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: FS Patriot Stage II head. Turbo Grind Comp Cams NEED GONE
Saturday, September 22, 2012 5:45 PM
Head is sold. Still have rods and pistons for sale as well as the comp cams. Need me monies for school, so let the offers come!



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search