WTB: short block 00-02 LD9 - Mid East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
WTB: short block 00-02 LD9
Tuesday, May 28, 2013 8:51 PM
As title states. short block (or bare block) 2000-2002 LD9 is needed.





BeardLife / Club Awesome Reject Blog

Re: WTB: short block 00-02 LD9
Tuesday, May 28, 2013 10:55 PM
I have complete 2.4 im taking out of my 02 to eco swap, only thing is im in central minnesota but im down to meet half ways


FuzzMASTA9
Re: WTB: short block 00-02 LD9
Wednesday, May 29, 2013 3:47 AM
I have a 99 long block. Was running when I pulled it from the car. Has about 125,000 miles on it. I was thinking of keeping it, but wouldn't be apposed to selling it, since I'll have a spare motor once I pull my current 99 motor.





Re: WTB: short block 00-02 LD9
Wednesday, May 29, 2013 7:45 AM
Pete P wrote:

I have complete 2.4 im taking out of my 02 to eco swap, only thing is im in central minnesota but im down to meet half ways


Will keep this in mind! I will search locally a bit more first. Thanks

-MD- Enforcer wrote:

I have a 99 long block. Was running when I pulled it from the car. Has about 125,000 miles on it. I was thinking of keeping it, but wouldn't be apposed to selling it, since I'll have a spare motor once I pull my current 99 motor.


was this a late year 99 engine? I know some changes happened mid year and I'm basically trying to skip the whole knock sensor modifications to run in my 02. Unless they are easier than I think.







BeardLife / Club Awesome Reject Blog
Re: WTB: short block 00-02 LD9
Wednesday, May 29, 2013 9:11 AM
Qwik2k2z24 wrote:



-MD- Enforcer wrote:

I have a 99 long block. Was running when I pulled it from the car. Has about 125,000 miles on it. I was thinking of keeping it, but wouldn't be apposed to selling it, since I'll have a spare motor once I pull my current 99 motor.


was this a late year 99 engine? I know some changes happened mid year and I'm basically trying to skip the whole knock sensor modifications to run in my 02. Unless they are easier than I think.


Gary just told me to pickup an insert and I would be OK. I need to buy one since my built short block is a 97 with 99+ wiring

threaded insert




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: WTB: short block 00-02 LD9
Wednesday, May 29, 2013 9:11 AM
Every J 99 Block I have / had, has had, the newer 00-02 style knock sensor. I can get a pic of it. It needs a bath and a rebuild. It wasn't smoking or anything when I pulled it out of my Red 99 Z24 two weeks ago. Compression is good, but I have no idea if or when anything was ever changed in the motor.

To my knowledge. Strip / re4build block, and install everything from you car. Should be "plug-n-play" after that.

You are also.... 235 mi, 3 hours 42 mins from me. I'll get pics tonight.





Re: WTB: short block 00-02 LD9
Wednesday, May 29, 2013 10:05 AM
-MD- Enforcer wrote:

Every J 99 Block I have / had, has had, the newer 00-02 style knock sensor. I can get a pic of it. It needs a bath and a rebuild. It wasn't smoking or anything when I pulled it out of my Red 99 Z24 two weeks ago. Compression is good, but I have no idea if or when anything was ever changed in the motor.

To my knowledge. Strip / re4build block, and install everything from you car. Should be "plug-n-play" after that.

You are also.... 235 mi, 3 hours 42 mins from me. I'll get pics tonight.



Perfect! The block is going to get stripped and bored .040 and built but that sounds like the perfect base for my plans.







BeardLife / Club Awesome Reject Blog
Re: WTB: short block 00-02 LD9
Thursday, May 30, 2013 3:52 AM
Anyone need a block ....







Re: WTB: short block 00-02 LD9
Sunday, June 09, 2013 7:48 AM
the only problem with running an insert in the 96-98 block for the 99-02 knock sensor, is that you get A LOT of ghost knock... you'll really want to detune your knock sensor by about 30% after doing so...

i have a bare 2000 block sitting in storage right now... i have the crank shaft, it'll need to be cleaned up... when i pulled the motor apart, number 3 rod bearing was spun.



Re: WTB: short block 00-02 LD9
Monday, June 10, 2013 8:23 AM
I have a 99 LD9 complete engine in need of rebuild, still runs but bad lower bearing. Located in ann arbor.


...you want a pic, then help me build something worth taking a pic of....
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search