RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc. - Mid East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Thursday, April 04, 2013 6:06 PM
Need to pay mike back, so if you can deal in-person that is very helpful.

$offer RK Upper&Lower mounts.


Eagle Rods: $200 BO
Weisco Pistons: $250 BO


OFFER
COMP CAMS turbo grind



http://i774.photobucket.com/albums/yy22/cybios/078673A1-DD4B-4232-8C54-34A447290616-1471-000001597295E7E8.jpg




Short-Ram custom made intake w/ spectre filer (don't hate) all pieces in 1st pic included. Will fit right in.
Also comes with throttle cable bracket to clear the elbow. http://img254.imageshack.us/img254/1405/forsale32.jpg
$50 installed
Probably spent $100-120 retail on all the silicone pipe connectors and whatnot. I will put it on the car for you if you want.


Magnaflow Dual Tip Cat-back. It's a solid piece, just not to my liking with the muffler sound. The piping is 2.5 (maybe 2.75) and would actually make a great system if you subbed the mufflers, or just cut them off or converted into single. The piping is the most valuable IMO
MAKE OFFER - PLEASE make an offer, I'm not using this and never will be.

http://img444.imageshack.us/img444/7590/forsale17.jpg
http://img266.imageshack.us/img266/3990/forsale15.jpg
http://img189.imageshack.us/img189/1328/forsale14.jpg
http://img341.imageshack.us/img341/5158/forsale12.jpg

Stock manifold, downpipe, cat, and flange (in 3 pieces, easily welded back together)
- I'll happily weld it back together for you if you bring/buy the flanges/little pipe pieces (about $20)
$100 MAKE OFFER

http://img845.imageshack.us/img845/8607/forsale21.jpg

Stock L61 intake manifold, out of an 04' Cavi
offer


2004 Cavalier automatic full engine harness. NO WIRES CUT... except for 1 ground terminal that broke, and the 02 sensors were cut w/ both ends of plugs.
$90-OBO


any offer
Valve cover off of an L61... it has a hole in it from drilling out the rivets.


NX panel switch - again, brand new, tested w/ test light and battery. 100% working
$50 Shipped


OBO
04 Cavalier L61 brake booster vac tube

OBO
2.75" to 3" Turbonetics silicone adapter

offer/b]
Stock 02-04 eco fuel rail /w injectors (does not come with the harness)


Have 2 of these
$10 Shipped EA


00+ radio harness.
$5


$200-OBO Sundown audio SA-12 Dual 2
Do have the packaging that it came shipped in, but it was expensive shipping. Box can come with it for an extra $15+shipping


$115-OBO MB Quart ONYX 1500.1d


Also have MB Quart ONYX 100.4 - 4 channel amp, awesome amp



Nitrous bottle brackets! - offer
1 Plastic
1 Metal (Zinc??)

Some T-12 model turbo's incase anyone has a gocart or bike.
$50 ea +shipping (2 left #3 is gone) -- Check end of album - http://imageshack.us/g/607/forsale01.jpg/





I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Thursday, April 11, 2013 1:20 PM
I'm interested in the turbo cams. Any chance of trading for a set of JBP N/A cams?
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Thursday, April 11, 2013 5:01 PM
so where do you live? i may be interested in a couple of items.



horsepower is how hard you hit the wall, Torque is how far you push the wall with you
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Thursday, April 11, 2013 9:17 PM
Parma/Cincinnati he is located.
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Friday, April 12, 2013 2:45 AM
RK sport upper mount new along with the rods and pistons? If are might be willing to make a offer for all of them


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Friday, April 12, 2013 3:54 AM
Yeah, the parts are in Cleveland (Parma) and I'm up there once or twice a month.

Make an offer. Everything is still there. No trades.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Friday, April 12, 2013 9:02 PM
So are the rods and pistons new? What about upper mount too?
If they are i might take them all but for sure want upper mount and your fuel rail but need shipped to minnesota


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Sunday, April 14, 2013 10:16 AM
Pete,

Rods and pistons are not new (mint- like new). This set is in the block still and have about 2-5k on them. I take that back, I pulled one piston and rod out to check the rings and skirt and it looks great. You may need to fit a new set of rings on as a precaution, but if you have the proper head bolts (arp studs) you can pull them out and replace the rings down the road for the cost of a head gasket if they aren't good... but I always put new rings on-- it saves a lot of headache.

Upper mount is the same story 2-5k on it, but it is in like-new mint condition.

Rods, pistons, upper mount, fuel rail & injectors - $529 shipped
Upper mount, rail/injectors - $129 shipped.

Are you local?



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Sunday, April 14, 2013 10:16 AM
Mike, I have an offer on the cams, but we're far apart on the price right now. I'll let you know how it plays out.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Sunday, April 14, 2013 8:23 PM
no not local, from minnesota actually. you around where the parts are so can ship right away? If so I will take mount and rail w/ injectors, just gotta put money in my account to send you paypal.


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Sunday, April 14, 2013 8:28 PM
You're gonna want to paypal mike, we can figure it out tomorrow. I'll be in town in 2 or 3 weeks to ship, if that's not soon enough I have family to ship for me.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Sunday, April 14, 2013 8:35 PM
I can paypal whoever I need to, just give me the right paypal you want it sent too. And yea I will be home in a week and gonna do my ecotec swap when get there so would be nice to get shipped right away.


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Monday, April 15, 2013 10:16 PM
Money is in account, just need the paypal you would like the payment sent to for that upper mount and fuel rail w/ injectors, thanks


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Tuesday, April 16, 2013 6:43 AM

The 4 channel booster.Got any pics and how much?
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Tuesday, April 16, 2013 2:14 PM
My Paypal is mike.iwan89@gmail.com

Once you guys settle everything let me know.
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Tuesday, April 16, 2013 5:30 PM
Ok like said I put extra money in my account bc I need these parts and can send the money to you Mike but need to make sure one of his family members can ship parts right away before send the money off


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Saturday, April 20, 2013 12:49 PM
Sorry I haven't been online. I'm driving up to Parma tonight or tomorrow morning so I will be able to ship anything all next week... Monday - Friday.

Pete, You go ahead and paypal mike. Let me know when it's done then I'll confirm with mike and ship everything out. Thanks!

Ed, The 4 channel amp? It's an MB quart Onyx 100.4 like said. No pictures on hand, but I can get some if you are seriously interested. I'm not sure how much I want for it... I haven't checked retail on that model in a while. I bought it for $170 2 years ago, looking for $100. It's the best amp I've ever owned except a sundown 125.4. I've owned 10+ 4 chan's. Let me know on how much $$ you're thinking.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Saturday, April 20, 2013 12:56 PM
Also have a Megasquirt 2 kit Map daddy 4, with jim sim for sale



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Saturday, April 20, 2013 1:34 PM
OK will send payment monday, have to put more money in my account so will let you know when send payment to mike


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Thursday, April 25, 2013 1:09 PM
Sounds good. Just so you are 100% aware Pete I am not responsible if anything is damaged, misposted, missing parts, etc. I'm just here to collect the money. I say this just to cover my own ass in case something goes awry. Thanks.
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Friday, April 26, 2013 10:13 PM
Whats the word? Ready to box up the mounts, rail and injectors. Mike put it bluntly, but he is the one you're paypaling money to and that's it. I'm responsible for everything else, but you still have all the security of paypal. Mike shouldn't touch the money untill you receive everything (3-5 days) just to be sure.hope

Let me know if this works with you , pete. I have other options although they're more complicated for me.

Everyone else, lets move some @!#$!



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Saturday, April 27, 2013 6:47 AM
Dont need parts anymore, found better deal right by me


FuzzMASTA9
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Wednesday, May 22, 2013 8:06 PM
Bump for money.
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Tuesday, May 28, 2013 2:03 PM
Double bump.

Got a PM for the exhaust, I think he's sorta local and can pick it up. I'll let you know mike!

Mike...Do you need anything for a cavalier? I'm starting to feel really bad and if you need any parts let me know I might have it.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: RK mounts, Internals, intake, Magnaflow, Harness, NX panel switch; Silicone adapter/radio misc.
Wednesday, June 05, 2013 2:26 PM
I wish I did need parts. If I did I would've grabbed a while ago. Need that cash flow.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search