COMPLETE part out - Page 2 - Mid East Region Forum
Forum Post / Reply
You must log in before you can post or reply to messages.
This is sad, I keep having to go back and watch videos of it running.
How long to you plan to hold on to parts?
Got the gauges today. Thanks again
Nic, I know man. I wish I had friends down here who are technically sound when it comes to tracking down wires and electrical issues. I just ran out of time, money and patience with this car. Modding since 2000 takes a tole on ya. Also Im selling stuff as we speak so im not holding onto anything.
Glad you got em ok Andy.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Oil catch can sold
Lower engine mount sold
I have every single piece of interior items I can let go as well.
Z24 red speckled front and back seats.
5 speed center console.
momo hub
NRG black steering wheel with red stitching
GM 2 BAR MAP SENSOR
Black Tow strap
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
I also have an aftermarket single horn, I believe its Hella. 25$ shipped in the US. Brand new never installed
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Updated list
• Polished Garrett GT3071R - 700.00
• Black Hot temp coated CCfab turbo manifold with external WG – 125.00
• Black Hot temp coated 3" downpipe 75.00
• 3" turbo back exhaust- 175.00
•• HKS SSQ BOV • 60.00
• 30X8X3 Intercooler • 45.00
• Hot temp coated dump tube - 20.00
• Tial 44mm Waste gate- 75.00
• Oil cooler setup with hoses for LD9. 45 shipped
• Ross Machine Racing sheet metal Intake manifold • Ross Machine Racing velocity stacks • Ross machine Racing LS1 throttle body flange • Stainless steel intake and throttle body bolts 500.00
• 75mm LS1 ported and polished throttle body- 100.00
• Vacuum manifold • -10.00
• AEM IAT screw in sensor + plug
• 2 ¼ hot side Polished Charge pipes
• 3” Polished cold side charge pipes
• Getrag poly trans mounts. - 80 shipped.
•
• Oil pressure gauge 20.00
•
• Stock 2001 Getrag flywheel, newly resurfaced – 25.00
•
17.7.5 matte black Konig Feathers w/ tires – 900 obo 3 MILES ON THEM
•
•
• 17” focal f5 drag rims with tires- 100.00
• TurboTechRacing Powder coated black upper solid mount 50.00
• 2000 starter – 60.00
• MDld9 crank offer
• Getrag tranny w/Team Green LSD insert – 450.00 newley reassembled
• Polished 160 amp alternator – 150.00
• Polished MRZ caps – 15.00
SUSPENSION
• TEIN basic coilovers with 2" lower springs in the rear – 550.00
• Baer 13" front brake kit – 800.00
• Neon rear disk conversion 150.00
• Vibrant front upper strut bar – 15.00
• Vibrant rear upper strut bar – 15.00
• Addco rear sway bar – 35.00
GM 2 BAR MAP SENSOR
Black Tow strap
NRG black steering wheel with red stitching. -160.00
Mom hub - 55.00
•
EXTERIOR
• Turbosport CF hood – 350.00
• CF Trunk – 400.00
• Shaved stock trunk 40.00
• Import fighter front – 250.00 obo
• Import fighter sides (fiberglass) – 55.00
• 03 LSS rear bumper – 100.00
• Toyota 95-99 tail lights – 175.00
Fuel related
Racetronix fuel pump harness • Racetronix pump • ractronix wiring harness, Walbro in-line fuel pump booster
• 1100cc ev14 FIC high impedance injectors Jegs performance 100 micron fuel filter • Jegs fuel pump relay kit
2001 BUILT 2.4 ENGINE SPECS - OFFER
Handled 330HP and 17psi with ease with my turbo setup, capable of a lot more.
Ported and polished head • 3 angle valve job • deck shaved • SS valves • bronze valve guides • ARP head studs • ARP Main studs • Cometic .030 NA head gasket • GM 2.4 Keepers • 2.3 springs • 2.3 Titanium hybrid retainers • 2.3 lifters • 2.3 HO Intake cam modified for PS • 2.3 HO Exhaust cam, 2001 Block deck shaved • block bored .020 • blue printed and balanced • crank polished and lightened • 2.3L oil pump conversion • Wiseco 9:1 pistons • Eagle H-beam connecting rods • ARP main bolts • Clevite 77 rod and main bearings •
Edited 1 time(s). Last edited Monday, September 23, 2013 8:59 AM
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Two brand new manual Getrag axles
1 drivers side -$50.00
1 passenger side long axle- $55.00
Turbo XS manual silver boost controller - $40.00
Front sway bar end link bushings, black in color, gold bolts - $15.00
Edited 2 time(s). Last edited Wednesday, September 25, 2013 6:42 AM
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Sorry to see you go man. Wish I lived closer; I'd love to have that trans.
"In Oldskool we trust"
Thanks Ryan, yea man I hate doing this. But I believe its time seeing all of my misfortunes I've been having with the car. It made me lose interest. I had a good 13 year run with modding it though lol
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
How much you want for the 5spd swap stuff? I do not need trans, axles, or shifter. But I do need all the rest. cables, pedal assembly, master, mounts, etc.
hey does that screw in iat sensor work with stock pcm/wiring?
and is gm 2 bar the m45 kit one?
RIP silver car. You will be missed.
Neon rear disk setup is sold.
I forgot to add
2.4 stainless steel power steering lines. Comes with all fittings for the pump and the rack to make it a bold on swap. 75.00 SHIPPED in the US.
Edited 2 time(s). Last edited Friday, September 27, 2013 10:15 AM
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Good seller and good part...shined up very nice. I need moar CF.
Do you have a pic of the vibrant rear strut tower bar?
Thanks Luke, looks good!
Aaron- its spoken for as of now. But i will let ya know asap.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
OK well if the deal falls through just let me know I would be interested in it
IAT and map sensor sold
Toyo tails back up for sale- 175 + shipping.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Updated list
• Polished Garrett GT3071R - 700.00
• Black Hot temp coated CCfab turbo manifold with external WG – 125.00
• Black Hot temp coated 3" downpipe 75.00
• 3" turbo back exhaust- 175.00
• 30X8X3 Intercooler • 45.00
• Hot temp coated dump tube - 20.00
Turbo XS manual silver boost controller - $40.00
• Oil cooler setup with hoses for LD9. 45 shipped
• Ross Machine Racing sheet metal Intake manifold • Ross Machine Racing velocity stacks • Ross machine Racing LS1 throttle body flange • Stainless steel intake and throttle body bolts 500.00
• 75mm LS1 ported and polished throttle body- 100.00
• Vacuum manifold • -10.00
• 2 ¼ hot side Polished Charge pipes
• 3” Polished cold side charge pipes
• Getrag poly trans mounts. - 80 shipped.
• Oil pressure gauge 20.00
• Stock 2001 Getrag flywheel, newly resurfaced – 25.00
•
2.4 stainless steel power steering lines. Comes with all fittings for the pump and the rack to make it a bold on swap. 75.00 SHIPPED in the US
17.7.5 matte black Konig Feathers w/ tires – 900 obo 3 MILES ON THEM
•
•
• 2 17” focal f5 drag rims with tires- 100.00
• 2000 starter – 60.00
• MDld9 crank offer
• Getrag tranny w/Team Green LSD insert – 450.00 newley reassembled
• Polished 160 amp alternator – 150.00
• Polished MRZ caps – 15.00
SUSPENSION
• TEIN basic coilovers with 2" lower springs in the rear – 550.00
• Baer 13" front brake kit – 800.00
• Vibrant front upper strut bar – 15.00 -pending
• Vibrant rear upper strut bar – 15.00- pending
• Addco rear sway bar – 35.00 - pending
Two brand new manual Getrag axles
1 drivers side -$50.00
1 passenger side long axle- $55.00
Front sway bar end link bushings, black in color, gold bolts - $15.00
Black Tow strap -15 shipped
NRG black steering wheel with red stitching. -160.00
Mom hub - 55.00
Hella single horn, 25$ shipped in the US. Brand new never installed
EXTERIOR
• Turbosport CF hood – 350.00
• CF Trunk – 400.00
• Shaved stock trunk 40.00
• Import fighter front – 250.00 obo
• Import fighter sides (fiberglass) – 55.00
• 03 LSS rear bumper – 100.00
• Toyota 95-99 tail lights – 175.00
Fuel related
Racetronix fuel pump harness • Racetronix pump Walbro in-line fuel pump booster
• 1100cc ev14 FIC high impedance injectors Jegs performance 100 micron fuel filter • Jegs fuel pump relay kit
2001 BUILT 2.4 ENGINE SPECS - OFFER
Handled 330HP and 17psi with ease with my turbo setup, capable of a lot more.
Ported and polished head • 3 angle valve job • deck shaved • SS valves • bronze valve guides • ARP head studs • ARP Main studs • Cometic .030 NA head gasket • GM 2.4 Keepers • 2.3 springs • 2.3 Titanium hybrid retainers • 2.3 lifters • 2.3 HO Intake cam modified for PS • 2.3 HO Exhaust cam, 2001 Block deck shaved • block bored .020 • blue printed and balanced • crank polished and lightened • 2.3L oil pump conversion • Wiseco 9:1 pistons • Eagle H-beam connecting rods • ARP main bolts • Clevite 77 rod and main bearings •
Edited 1 time(s). Last edited Monday, September 30, 2013 6:10 AM
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Sorry to see David. Wish you the best with the next project. I imagine I wont be far behind you next year some time! Good luck moving all the parts!
Did you get my stock lower mount? I never checked in on that.
Its a bit beaten and dirty, but it should work for lower power applicaions lol.
"A car just isn't a car without a little blood, sweat, and beers." -- Shadowfire
Sure did thanks Matt.
This part out is on hold for little bit. Prolly have something else in the works.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Dadgumit! I just PM'd you...
Did you say my car looks slow??
Still selling this bezal 105 shipped
Also my fiber glass import fighter side skirts - 60$ picked up.
I really want to keep my CF trunk, but if someone is willing to come get it I will go lower on the price. Message me.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
Dave - just passed throught you thread,
Sooo sorry man. I hope this dosen't discourage you from any future projects.
You still have the red speckled seats? are they original? - matching rears?
Mikey G wrote:Dave - just passed throught you thread,
Sooo sorry man. I hope this dosen't discourage you from any future projects.
You still have the red speckled seats? are they original? - matching rears?
Hey man lol. I started to give up at first, but decided to hold the part out off for a little bit until I can find a fresh 2k+ Z to work on. We will see how that goes, ill keep looking until spring time and if I havent found anything by then, then the part out will continue again lol. I do have front and rear red speckled seats.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
Forum Post / Reply
You must log in before you can post or reply to messages.