Sold the built motor, so everything else is up for grabs. Prices do not include shipping
98 Bright Red 5spd z24 shell. Still on the car: koni reds on ground controls, 96-99 toyo tails, and vis cf hood. Will sell with these parts on it, or will part out if there is interest (need stock suspension). Less than 80k on car, overall in great condition with some dings here and there. RF fender is dented due to a small branch falling on it. Car always covered and rarely driven. Interior looks messy because I like to store stuff in there when I'm not working on it such as tools and interior parts. Partially gutted form front seats back, gauges you see are not included. Looking for $1200 for everything. If you would like anything off it, shoot me a PM and we might be able to work something out.
What she used to look like
Built izuzu with cryoed 2.2 gears and a pg insert with Brad Keuter's custom springs. Brad bought this trans brand new from GM a few years ago and was making over 400whp on it before his motor blew. Less than 10k on trans. Also included, spec stg 5 clutch with stock resurfaced fw and H.O. axles, all in great condition I would like to sell as a package, but will part out if need be. only asking $600 for all this folks.
Next we have a venom rail, 6' of -6an line, 6' of -8an line, both aeromotive firewall quick connects to run braided fuel lines from the firewall up. This is the easiest way to do it!
Looking for $200 for everything. (quick connects themselves are around $40/piece)
Next a brand new external coil conversion kit complete with wires, coils, and dis-2 box.- $175
MSD Tach Adaptor. Regardless of what you hear, this is the only real way to get an accurate aftermarket tach signal going. The pink wire coming from the idi is NOT accurate. $45
4 Brand new NGK tr6 Plugs $25
LD9 Mild Steel 3/8 Exhaust Flange $40
Brand New Siemen Deka 82lb (750cc) low imp injectors, will fit 95-99 ld9's. $175
Powerdercoated black 2.3 HO Intake Mani with 56mm TB. Awesome shape $100
Custom Tig welded 2.4 Aluminum Intake manifold with velocity stacks and ls1 75mm tb. Will need new intake flange welded on. I can supply a flange extra. $200
97 2.4 Running Longblock w/ trans. and all accessories, 150k, ran fine when taken out of car. $175
Motegi 5x100 15x8 1pc Forged Flat Black Trak lites with mounted BFG G-Force T/A 225/50/15 Drag Radials. 70% left on these, barely even used. They are quite dirty in the pics. $500
]
Blew it up, build numbers coming soon
I wouldnt mind taking that fuel rail stuff off your hands.
I'll get in touch after work.
I <3 JGM
I think bigfoot is blurry,
that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra
scary to me. There's a large, out-of-focus monster, roaming the countryside.
"Run! He's fuzzy!" "Get outta here!"
In Loving Memory of Phil Martin December 14 2005
How much for konis an gc
z28guy(KGM BEOTCH)
How much for the cf hood?
Club Teh Jeffie wrote:I wouldnt mind taking that fuel rail stuff off your hands.
I'll get in touch after work.
Sounds good but havn’t heard from you yet..
z28guy wrote:How much for konis an gc
$300 + stock suspension. It could even be blown, I just need it to roll on.
Anthony LaVerghetta wrote:How much for the cf hood?
$150
Blew it up, build numbers coming soon
does that fuel stuff attach right to the stock lines under the firewall?
LE61T PTE6262 Powered 
LD9Stunner wrote:Club Teh Jeffie wrote:I wouldnt mind taking that fuel rail stuff off your hands.
I'll get in touch after work.
Sounds good but havn’t heard from you yet..
Yea sorry about that I ended up staying out later then I planed.
But I was curious about the same thing as phil.
I <3 JGM
I think bigfoot is blurry,
that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra
scary to me. There's a large, out-of-focus monster, roaming the countryside.
"Run! He's fuzzy!" "Get outta here!"
In Loving Memory of Phil Martin December 14 2005
Yes, they are quick connects to the factory 3/8 feed and 1/4" return firewall connections
Blew it up, build numbers coming soon
im in ct i could do the suspension, that long block is enticing as well. jeffie knows why...
how much for the shell, minus the hood? That spare motor too
If I can get the funds together I'll take the Ignition swap stuff off your hands.
sold sorry
Blew it up, build numbers coming soon
I PM'ed you about the Tach Adaptor!
Bump, any takers on the car as a whole? The good parts still on it are toyo tails and ground control coilovers on koni reds. Only looking to get 1k OBO
Blew it up, build numbers coming soon
im still in for suspension. just been snowed in a bit
LD9Stunner wrote:Bump, any takers on the car as a whole? The good parts still on it are toyo tails and ground control coilovers on koni reds. Only looking to get 1k OBO
RaginZ was asking about the whole car... Drop him PM
2003 Cavalier
Stock 2.2 Liter, 5 speed
" Leave the rice to Uncle Ben's and the wings to KFC..
Go clean or go home. "
Intrest in the
carbon fiber hood
supension
and toyos.
maybe we could work something out how good is the clear on the hood?
gah just realized how far you are from me :/
free bump petes a great person to buy from. i pulled that 98 motor and bought the car it came from. it all nice stuff.
The brother bought HPTuners from him. Everything went great!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I received the flange in the mail the other day. No problems at all
Jason
99 Z24
LG0/LD9 for Life
10 Year Bash Veteren
motor still around for sale
