Cavy parts need to get outed - North East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Cavy parts need to get outed
Monday, August 27, 2012 12:49 PM
I have an entire shell but it won't sell, so here goes

Text or email me if interested in anything fearmydatsun@gmail.com 845.633.seventeen one 1

003-2005 Cavalier LS Sport front and rearends. Everything you need to adapt them to your cavalier, sunfire, cavfire, whatever. Will fit anything from 95 on. This was installed on my 2000, comes with 2000 tails & wing. 03-05 fenders, front and rear bumpers, headlights, CF hood (needs to be recleared but its still lighter than your stock one), and front foam bracing.
-$375 takes it all



Also have stick shift center console - $25



Stick shift with short shifter and perfect shift linkage (not stretched) - $100



Vortech FMU with 8:1 or 10:1 plate installed, 13:1 comes with it - $125



Saab Turbo - No play in the turbo itself. Internally waste gated. Used.
I want to say it is a GT17 however I am not 100% about that. - $100






Getrag F23 Transmission originally came out of a 2000 cavalier z24 with the LD9 2.4 quad 4 engine, shifted fine when pulled - $75



I have a complete supercharger setup intended for a Sunfire or Cavalier with the 2.4ltr LD9 Quad engine. I have everything including the reflashed ECU and injectors. Will also include a smaller pulley which hasn't been installed. It is tapped for direct port nitrous but currently has bolts in the runners to close them up. Also, the bearings to the idler pulley need to be replaced. I believe there is a "how to" on j-body.org.
It will probably fit the malibu and achieva, or anything else with the quad engine but you will need to tune your ecu on your own. Will also fit pre-2000 j-bodies but will need a few things - $650








Pacesetter Armour Coated header for a 99-02 2.4L with 1-1/2"tubing diameter and 3" collector. Header was barely used. There are roughly 7K miles on it and it is in excellent condition.






Re: Cavy parts need to get outed
Monday, August 27, 2012 12:51 PM
also have doors to a 2dr all power, ready to come off. $100 each



Re: Cavy parts need to get outed
Monday, August 27, 2012 1:06 PM
oh, also forgot about the bucket seats in back/red & rear bench. Have driver & pass door panels and rear panels for 2rd.



Re: Cavy parts need to get outed
Monday, August 27, 2012 1:25 PM
isnt that last pic the pic of the exhaust i bought off you? or did you just rip me off?



Straight lines are over-rated In My Opinion =]
Re: Cavy parts need to get outed
Monday, August 27, 2012 1:27 PM
lol, it is, its just to prove that I have the flange that attached to the end of the header... old pic. How did that work out for you, anyway?



Re: Cavy parts need to get outed
Monday, August 27, 2012 7:42 PM
Yum blower....

Hm

Chris


'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: Cavy parts need to get outed
Monday, August 27, 2012 8:00 PM
how much just for the front and the fenders? message me



2010 Lonestar Bash 2nd place J-Body Street Class
2011 texas heatwave 2nd place american compact street class
Re: Cavy parts need to get outed
Monday, August 27, 2012 9:05 PM
i need to talk to the wife about updating the vert it seems




Re: Cavy parts need to get outed
Tuesday, August 28, 2012 2:00 PM
lol it worked out good, i actually still have the resonator and the pipe with the O2 mod you did, i used the rest with my gold cavs exhaust. all i had to do was just buy a few clamps and one lil pipe adaptor from autozone. Sounds mean, like always lol. should last me a year till i can used my tax returns and get a brand new one.



Straight lines are over-rated In My Opinion =]
Re: Cavy parts need to get outed
Tuesday, September 04, 2012 6:25 AM
I thought you sold the shell?

If not how much for just the roller?




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Cavy parts need to get outed
Tuesday, September 04, 2012 6:25 AM
I guess I text you later sometime.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: Cavy parts need to get outed
Tuesday, September 04, 2012 8:10 AM
Roller is being cut up, thrown into the back of my truck and sold for scrap, once I do that, the seats will be for sale as well.



Re: Cavy parts need to get outed
Tuesday, September 04, 2012 8:15 AM
Oh just wondering. Thought you sold over a year ago.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Cavy parts need to get outed
Tuesday, September 04, 2012 8:16 AM
Yea, then my step dad told me not to cause he wanted to build it into a race car with a big block. Obviously that never happened



Re: Cavy parts need to get outed
Tuesday, September 04, 2012 1:07 PM
entertaining offers for that supercharger?


01' Z24 5 speed
422whp/400wtq
T4 Turbocharged
Built LD9
HP Tuners
Re: Cavy parts need to get outed
Friday, September 14, 2012 8:18 PM
i need just one headlight


ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500


Re: Cavy parts need to get outed
Wednesday, October 03, 2012 9:37 AM
supercharger - sold
tranny - sold
turbo - sold



Re: Cavy parts need to get outed
Monday, October 08, 2012 1:12 PM
I'm not interested in trying to figure out how to ship a bumper or hood. Also, if you want a fast response, you need to text or email me, I don't get on here often enough to make PM's efficient.

my contact info are in the first post.



Re: Cavy parts need to get outed
Monday, October 08, 2012 2:05 PM
Grayhound bus will ship stuff. shipping a bumper is like 65 bucks thru them.


ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500


Re: Cavy parts need to get outed
Thursday, October 18, 2012 3:24 PM
do you still have the short shifter?
Re: Cavy parts need to get outed
Friday, February 15, 2013 4:47 AM
You still got the header??



Straight lines are over-rated In My Opinion =]

Re: Cavy parts need to get outed
Friday, February 15, 2013 8:29 AM
I see on clist you still have the body parts. i should be up in hartford for meetings on the 28th. do you think you would be available to check them out?



Re: Cavy parts need to get outed
Friday, February 15, 2013 8:27 PM
I'd be interested in the trunk and tails. Shoot me a price.
If I dont hear from you in a couple days, I'll email ya.




Re: Cavy parts need to get outed
Thursday, February 21, 2013 12:12 PM
Im interested on the cf hood and seats. Are they still available?



http://carphotos.cardomain.com/ride_images/4/653/2569/39131284001_medium.jpg
Born to race, But raise to win!!!
Re: Cavy parts need to get outed
Thursday, February 21, 2013 12:19 PM
Is the rear still available?
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search