Do first gens use the same engine mounts as 2nd gens? - First Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Do first gens use the same engine mounts as 2nd gens?
Wednesday, January 18, 2017 11:09 AM
Do first gens use the same engine mounts as 2nd gens?




On the inside my car looks like a fighter jet.

Re: Do first gens use the same engine mounts as 2nd gens?
Thursday, January 19, 2017 9:18 AM
Pretty sure they do. I have swapped over the trans mount from 2nd to 1st gen, but the engine mounts & dogbone look the same also.


86 Skyhawk wagon 1.8SOHC 93 Sunbird two door 2.0SOHC 93 Sunbird four door 2.0SOHC
Re: Do first gens use the same engine mounts as 2nd gens?
Thursday, January 19, 2017 5:25 PM
Rockauto shows the same part numbers for the 88 and the 85 for all their mounts. I didn't check the dog bone though.
Re: Do first gens use the same engine mounts as 2nd gens?
Thursday, February 02, 2017 10:54 PM
I started a very small group buy for solid poly mounts over on v6z24.com if anyone is interested. I will make them any hardness you want and they should outlast the stock mounts if not the car. My new aftermarket mounts only lasted a year and that is unacceptable.




On the inside my car looks like a fighter jet.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search