Terry Lewis wrote:
The RS Vert is setting quietly in the garage with the top down
I've read it is not a good idea to leave a top down for extended periods of time. It causes creases to get in them.
Hey guys just updating things for me lately.I the last two days have been addressing my younger (19 yr old nephews) 2006 Honda accord check over of his car since jan of 2016.The car has 151,760 miles and the original miles were 139k.I found some issues since august when I did a coolant flush,new thermostat,new hoses,coil packs and plugs and front brakes and rotorsProblems that are current are .Alignment is wayyyy off go figure as I think he hits every road hole just my humor.The tires looked fairly new on the buy back in dec of 15.However one tire had only 4/32 tread and feathered on both outside treads but the other 3 8/32 and semi ok.I got two new tires today,and already steam cleaned the interior and just a full on clean up.I did remove all 4 tires and clean both sides of the alloy wheels and did rotate the tires.I can bore you with all the specifics but in short the car has been gone thru.In short I did wash/wax the car and polish the headlights,and new wiper blades as the others are over a yr old.I did wax the windshield and back glass and rain the side windows and last the bigger fix.The power steering pump seals are leaking and I am going to have to just replace that over a rebuild to save time.Cost of said pump with the core cost added $272.00.Granted I already replaced the starter and upgraded the ground wires from the battery from the fender and then a extra ground to the block back in jan and the battery.Over all the car has been problem free!!!! I am just keeping tabs on this car to keep it cost effective and no issue's.R
Oh, its getting a new top next year, so i'm not worried... Thanks for the info! The new top will stay up when stored.
Happy New Year!!!
87 RS Convertible - 2.8V6 - 3-Speed Auto, Digital Dash - Complete LED / HID Conversion - Alarm/Keyless Entry
I just found out about never leaving a top down not long ago. I also found out do not leave a new one in the box for very long either. Put it on soon after purchase. I screwed up and left my new top rolled up for quite some time before installing it. I did take fabric bolt cobs and rolled it up, but I stood it up and the weight of it crumpled the sail panel on the end. It sat that way for over a year. It has a number of small creases in that sail panel. I understand I may be able to get them out with a heat gun though. I haven't tried heat yet, but they have already diminished some since I installed it. Hopefully they will come out entirely, but I may need to take it loose and pull it tighter now too.
Happy New Year !
Reviving a old post.I have literally done nothing to sunny.Good side its always garaged and covered.Just between job changes and other required duties at home,and $$ sunny is fine.I have been busy with a lot of outdoor work since mowing here started last week for the first time.This week went to mow and broke a drag link on the ride mower so,no steering equals no mowing.Parts are ordered and this mower is a 2012 and to have this break kind of well sucks.But on a fun side I will make a video to put up on my youtube page to share with all.On this mower the steering gear has to be dropped out just to unbolt the damn drag links.Unlike my old MTD real easy just unbolt it from the gear and front axle and reinstall.Idk why Husqvarna did this style but,whatever.Ironically I am going to mow today(sat) with our back up John deere..Thought I would chime in since I really do not get online much as I prefer to be outdoors or cleaning in the house just being productive.
Well there you are!! Nice to see you on here
Good news you can fix your rider as the price to buy a new one can cause one to have a stroke! Well I guess if you were to be in the market for a brand new Pickup Truck....well then a rider might seem like a bargain compared! Stuff now is so $$$$$$expensive nowadays. That goes a long way to explain why I still own and drive my old vehicles.
My old weed eater simply wouldn't start this past weekend and I just had that feeling this was it. I tore into it and gave it a good attempt, but not even a lick. So I resorted to simplicity. Picked up a simple corded base unit at WalMart for $25. I mean...$25 probably wouldn't have barely covered repairs of the old gas job. Actually found I liked it better than the gas model - I have a very small area to maintain so this work well...I'd say nearly 1/2 the area I used to work on has been negated by laying down all those tarps to park my vehicles on. I decided to continue going this route as the rest of the gas tools go south. Eventually I won't need to have mixed gas to sit around and go bad either. I can even take an electric unit inside and clean it up after use, something that I'd dare not think about with a nasty greasy old mixed gas job. I'd say nearly 1/2 the area I used to work on has been negated by laying down all those tarps to park my vehicles on.
If you got a lot of ground to cover like Ron though , there really isn't much to choose from. I guess the sellers know that and can sit back a wait till you are desperate enough to pay what they demand. Maybe one day they will have batteries strong enough to be reliable for yard work, till then...... gas is king!
Orlen Brown wrote:
Stuff now is so $$$$$$expensive nowadays.
Boy you got that right Orlen. Our average weekly grocery bill used to be $30-35 now its $50 and that is with using coupons. Don't get me started on auto parts prices, what really ticks me off is the garbage parts from China they pass off as good parts only to last a week, month etc before needing replaced again.
Just glad its gardening season again, gonna be planting some sweetcorn, Purple Cherokee and Beefsteak tomato's and cucumbers.
Nice to hear from you Ron
Be happy it's something simple and cheap to fix. I have a buddy that has an old mower that needs an engine rebuild but he doesn't want to pay to have it rebuilt so he coats the neighborhood in blue smoke every time he mows
I learned that, "Chinese parts only last a short time" bit with front wheel bearings on my 2001 Z24.
Fortunately, I purchased them from 1Aauto and they credited my purchase toward Timken bearings.
The Timken's cost more, but are made in the USA, and worked perfectly until, well read the story on Jacked, Wrecked Sold thread.
Little Old Lady....