2.0 turbo intake manifold? - First Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
2.0 turbo intake manifold?
Friday, September 01, 2006 3:57 AM
does anyone know if there are any gains from swapping the 1.8t manifold with the 2.0t manifold??

Re: 2.0 turbo intake manifold?
Friday, September 01, 2006 9:34 PM
highly doubtfull, if it was any diffrent at all it would be smaller along with everything else off the 1.8 that varys from the 2.0 its all smaller cause it has less power to support, u seen the size of turbo on a 1.8? its a joke, lol




Re: 2.0 turbo intake manifold?
Saturday, September 02, 2006 3:06 PM
No power gain, actually a loss over the 1.8 mani.
Re: 2.0 turbo intake manifold?
Tuesday, September 05, 2006 7:03 PM
Hey easy on the turbo in the 1.8.

It took the horsepower from 80+ to 150. It was a rocket at the time - the 84 Mustang was rated at about the same horsepower - with twice the displacement.

That being said, yes, it is not modern by any means and can be improved as shown by several members of this board.




Re: 2.0 turbo intake manifold?
Friday, September 08, 2006 1:28 AM
mabye i didnt say this right, would it be beneficial to take off the intake manifold on my 1.8t and put on an intake manifold from a 2.0 turbo?
Re: 2.0 turbo intake manifold?
Saturday, September 09, 2006 3:02 PM
Ahhhhh, read my post again !
Re: 2.0 turbo intake manifold?
Saturday, September 09, 2006 3:10 PM
It's a loss because... it won't fit for a start. 2.0L engines have higher intake ports.


--------------------------
LT3 Powered Vauxhall Astra.
Intercooler, Mopar Super 60 Injectors, SDS Stand Alone EFI, Ported Big Valve Head, Cast T3 Manifold With External Wastegate + More
Re: 2.0 turbo intake manifold?
Saturday, September 09, 2006 5:38 PM
interesting. now what about using a 2.0l mpfi non turbo intake (92-94) on a 2.0l turbo??? i know the n/a mpfi intake has a bigger throttle body.



Re: 2.0 turbo intake manifold?
Sunday, September 10, 2006 8:58 PM
2literturbo has posted flow numbers, and I've written about doing the swap more than once.

The manifold is basically the same. It's not red, and it doesn't say "TURBO" so it probably won't be anywhere near as powerful.

-->Slow
Re: 2.0 turbo intake manifold?
Tuesday, September 12, 2006 12:04 PM
motorman377 wrote:

Ahhhhh, read my post again !



oh, sorry! i totally missed your first post.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search