Clearing Out 2nd Gen Parts - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Clearing Out 2nd Gen Parts
Monday, December 29, 2008 5:22 AM
Got to get rid of all these parts. I'm getting out of the 2 gens. Most of the larger items are pickup only.

88-90 Z24 hood, needs a little work, have a latch to fit it for 91-94 - P/U only
88-94 cowl panel
91-94 Z24 rear bumper P/U only
91-94 Z24 side skirts, emblems shaved - P/U only
88-90 Cav tail lights, inners and outers
BMW headlights for conversion
88-90 Cavalier header panel headlight assembly, mint from a 19,000 mile car - P/U only
84-89 Cavalier coupe passenger door, no rust, straight, in zinc oxide primer - P/U only
89 2.8L, ran good when pulled, needs UIM installed have new gaskets, needs injectors, 136,000 miles - P/U only
88-94 Cavalier left front fender - P/U only
88-90 Cavalier left headlight
91-94 Sunbird tail lights, inners and outers
rear center panel from 94 Sunbird
91-94 Sunbird headlights, also have grille
Sunbird rear spoiler
92-94 Strut tower bar

Re: Clearing Out 2nd Gen Parts
Monday, December 29, 2008 6:30 PM
I also have for an '88 Z24 coupe, the wiring harness for the power doors. This is the complete harness for the doors that connect to the main harness under the dash. It does not have the original plug at the window switch end, it has been modified using a different set of window switches.
I also have the harness that runs inside the car to the trunk for the power trunk release, and rear defroster.
Re: Clearing Out 2nd Gen Parts
Saturday, January 03, 2009 7:56 PM
how much for the bmw headlights




Re: Clearing Out 2nd Gen Parts
Saturday, January 03, 2009 8:32 PM
$40+shipping
Re: Clearing Out 2nd Gen Parts
Monday, January 05, 2009 10:40 AM
have a photo of the strut tower bar ?
Re: Clearing Out 2nd Gen Parts
Monday, January 05, 2009 12:44 PM
cav93 wrote:have a photo of the strut tower bar ?



Re: Clearing Out 2nd Gen Parts
Tuesday, January 06, 2009 5:39 AM
Do you know if it will fit a four door?
Re: Clearing Out 2nd Gen Parts
Tuesday, January 06, 2009 6:05 AM
also any rust on it cant tell if its dirty or rust
Re: Clearing Out 2nd Gen Parts
Tuesday, January 06, 2009 1:03 PM
As long as your 4 door is a 92-94, I don't see why it wont fit. Look at the bolt arrangement on top of your strut towers and see if it matches with this bar.

Just a little dirty, so I cleaned it up a little for you and took these pics. The first pic, it has one little spot that has surface rust. It has a couple small little scuffs and scratches, but nothing major.





So, sk843143, I take it 40 bucks for a nice pair of BMW headlights is'nt cheap enough?
Re: Clearing Out 2nd Gen Parts
Tuesday, January 06, 2009 9:38 PM
how about 20 shipped for the strut bar?
Re: Clearing Out 2nd Gen Parts
Wednesday, January 07, 2009 11:54 AM
cav93 wrote:how about 20 shipped for the strut bar?


You're looking for a hell of a deal are'nt you? I'll do 20 plus shipping.

Re: Clearing Out 2nd Gen Parts
Thursday, January 08, 2009 11:41 AM
I have a 4 door with the STB. It came factory on my RS, so yes, it does definitely fit.


2010 Honda Fit LX
Re: Clearing Out 2nd Gen Parts
Thursday, January 08, 2009 3:43 PM
how about 30 shipped? pm me.
Re: Clearing Out 2nd Gen Parts
Wednesday, January 14, 2009 8:14 AM
sorry best friend committed suiside ...... so havent ben on in a wile ...... ill have to get back to you later on the headlights




Re: Clearing Out 2nd Gen Parts
Thursday, January 15, 2009 3:54 PM
Strut bar sold. BMW headlights gone.
Re: Clearing Out 2nd Gen Parts
Monday, January 19, 2009 4:44 PM
Any interior pieces? I need the bezel that goes around the radio and a/c controls.


GM Powertrain Engineer
Currently in Charlotte, NC
Worked at Lordstown Assembly in Mid 90s
Hamtramck, Lake Orion, Lansing Grand River
Currently work on older cars but support
any GM make or any car for that matter.
Owned 3 J's over the years among other cars.
Currently 88 Z24 Convert. Mostly stock.
Mild exhaust, chip, CAI, stereo, etc.
Feel free to hit me up on anything!
Re: Clearing Out 2nd Gen Parts
Monday, January 19, 2009 4:58 PM
PlanetCadillac wrote:Any interior pieces? I need the bezel that goes around the radio and a/c controls.


Sorry, that got tossed awhile ago.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search