08 ecotec Engine for 01 swap - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
08 ecotec Engine for 01 swap
Monday, January 02, 2012 11:59 AM
Is it possible to use this engine I have one at the shop just have to rebuild i's it possible to replace the head and swap it off the earlyier engines that didn't have electric power steering? Anyone done this?

Re: 08 ecotec Engine for 01 swap
Monday, January 02, 2012 12:11 PM
Trigger wheel for crank sensor is completely different. You can use everything from the newer motor, but the crank shaft.


...............wait are you also talking about two completely different motors....LD9 and L61?




Edited 1 time(s). Last edited Monday, January 02, 2012 12:11 PM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: 08 ecotec Engine for 01 swap
Tuesday, January 03, 2012 1:26 PM
alright thanks and well my car has the ld9 in it and i was thinking of doing the eco swap in it and i got a newer l61 engine that i came across at the shop.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search