3400 swap egr question - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
3400 swap egr question
Sunday, September 13, 2015 2:59 PM
i am swaping a 3400 motorout of a 2000 impalaint my1990 z24 5 spd.
My question is how do i wire my car to use the 3rd generation EGR valve. IS it as simple as wiring the 3400 connector to my 3.1 harness? any info is appreciated

Re: 3400 swap egr question
Sunday, September 13, 2015 4:17 PM
I believe TCE makes and adapter to use the stock one. You can also delete it if you getting a custom tune which is recommended as its been found out the car will run very lean. There is a writeup on v6z24 on how to wire it.




On the inside my car looks like a fighter jet.
Re: 3400 swap egr question
Monday, September 14, 2015 10:28 AM
thanks for the imput, i ended up using this solution
http://www.v6z24.com/jbodyforum/how-to-90-94-egr-to-2000and-3400-t75222.html
Re: 3400 swap egr question
Monday, September 14, 2015 10:30 AM
i will post on a new thread when i finish the build, wish me luck!
Re: 3400 swap egr question
Monday, September 14, 2015 7:27 PM
You may want to read the comments before using that method. Sounds like a problem maker.




On the inside my car looks like a fighter jet.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search