Fender Braces- Yep, Built by OEM - Page 7 - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Fender Braces- Yep, Built by OEM
Saturday, September 25, 2010 7:11 PM
i was in the same boat you are with getting my hand behind the brace into the hole once the brace was mounted. i have big ass hands and i couldn't squeeze in there. so i took the brace off, stuck the bolts and a washer in the holes i drilled from the inside of the frame, through the big hole, and remounted the brace over top of the bolts. then i installed the rest of the hardware (washer, lock washer and nut) on the outside of the frame over the brace and blasted away with my 3/8" impact gun luckily the bolts didnt spin at all when i was tightening the nuts, otherwise i would have had problems

ahhh i see what you're saying with the clips. makes sense to me now lol.

good luck with the inner fender plastic thingys. at that point i didnt have the patience for them. lol. haven't noticed a drastic difference without them, but i wouldn't have minded reusing em.




Re: Fender Braces- Yep, Built by OEM
Monday, September 27, 2010 7:04 PM


















Underdog Racing
Re: Fender Braces- Yep, Built by OEM
Tuesday, September 28, 2010 5:27 PM
nice job! your cuts on the inner fender bracket are a lot cleaner than mine were. lol. the plastic piece looks pretty good too.

thought these was going on your white car for some reason, lol.



Re: Fender Braces- Yep, Built by OEM
Wednesday, September 29, 2010 10:35 AM
Re: Fender Braces- Yep, Built by OEM
Wednesday, September 29, 2010 3:09 PM
now that i know you can retain all the stock items, i will prolly pick up a set for whitey but yeah.... these were always for the black one.

ps, mark is gay.



Underdog Racing
Re: Fender Braces- Yep, Built by OEM
Wednesday, September 29, 2010 5:55 PM
wonder how these will help a convertible. hmmm
Re: Fender Braces- Yep, Built by OEM
Wednesday, September 29, 2010 6:34 PM
Spencer wrote:

wonder how these will help a convertible. hmmm

Yes they would.
Do the mod and enjoy the benefits.


Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!





Re: Fender Braces- Yep, Built by OEM
Wednesday, September 29, 2010 6:35 PM
Probably amazing in a convertible.




http://www.overkillengineeringmotorsports.com/
Re: Fender Braces- Yep, Built by OEM
Monday, October 04, 2010 1:03 PM
Are these going to be in production for a while? I wouldn't mind getting a set but I don't start my new job till the 14th of October.





Re: Fender Braces- Yep, Built by OEM
Monday, October 04, 2010 2:14 PM
I have one set left. After that unless I get 5 people together I wont be making another batch


http://www.overkillengineeringmotorsports.com/
Re: Fender Braces- Yep, Built by OEM
Monday, October 04, 2010 8:53 PM
how much are these again?

Re: Fender Braces- Yep, Built by OEM
Tuesday, October 12, 2010 2:45 PM
I have another set of these left, $199, there ready to go.

Mark


http://www.overkillengineeringmotorsports.com/
Re: Fender Braces- Yep, Built by OEM
Tuesday, October 12, 2010 5:41 PM
I WANT!
Re: Fender Braces- Yep, Built by OEM
Monday, October 18, 2010 8:17 AM
id be in for the second run of them, I would love a set



LE61T PTE6262 Powered

Re: Fender Braces- Yep, Built by OEM
Monday, October 18, 2010 10:51 AM
OEM wrote:

I have one set left. After that unless I get 5 people together I wont be making another batch


maybe start a feeler thread? i would be in for 2(still depending on what happens with the brake stuff for my car)
Re: Fender Braces- Yep, Built by OEM
Thursday, February 03, 2011 6:26 AM
Bump, I have one set left $175 shipped. They are packed and ready to ship.

Mark


http://www.overkillengineeringmotorsports.com/
Re: Fender Braces- Yep, Built by OEM
Thursday, February 03, 2011 1:59 PM
Mark, PM sent to you.
Re: Fender Braces- Yep, Built by OEM
Thursday, February 03, 2011 4:48 PM
Finally got a set from a good friend that was giving them away.
Thanks John and thanks Mark for making these. Now I've got a set to complete the package.


Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!





Re: Fender Braces- Yep, Built by OEM
Friday, February 04, 2011 3:59 PM
giving them away? what the...



If it takes forever.... I will die trying. Underdog Racing
Re: Fender Braces- Yep, Built by OEM
Saturday, March 12, 2011 12:32 PM
Hey OEM do you still have that last set of braces for $175, if so I'll take them, thanks.
Re: Fender Braces- Yep, Built by OEM
Sunday, March 13, 2011 7:33 AM
OEM is out of fender braces but will make another run if I can get 3 more people to go in with me so who in?

1. Dale Young

Re: Fender Braces- Yep, Built by OEM
Thursday, December 29, 2011 4:59 PM
Hi Mark.


Error: Sig not found.

Re: Fender Braces- Yep, Built by OEM
Thursday, December 29, 2011 8:23 PM
Tinkles(Boost Face) wrote:

Hi Mark.


PM sent


http://www.overkillengineeringmotorsports.com/
Re: Fender Braces- Yep, Built by OEM
Friday, December 30, 2011 5:38 PM
You need a set Tink?
I've got a set that's never been touched or taken out of the original shipping package.
PM me if that's what you're looking for.



Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!





Re: Fender Braces- Yep, Built by OEM
Friday, December 30, 2011 7:20 PM
Im not in need of a set yet James.


Error: Sig not found.

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search