z yaaaa wrote:^^^^ check out the name!!! OVERKILLengineeringmotorsports!
k, thanks, move on.
CAVY 2NV wrote:z yaaaa wrote:^^^^ check out the name!!! OVERKILLengineeringmotorsports!
k, thanks, move on.
OK now you want to follow my post and tell me to move on when I have nothing bad to say ...
well trust me I will send this thread to the old craper box also .. dont start it and their wont be any ,,,,OK
Sorry Mark for your friends comment... I hope this dont turn out like the motor post ..
I really dont think that your work on this is really nice ... Have a nice day
OEM wrote:OK guys, a couple of you asked about 3 months ago for some fender braces and here they are. This is the drivers side. We figured that you will only need to see one side to know if you guys are interested. The drivers side has some type of box, that makes it sooo much harder to make. If the pass side fender is not the same then they should not be too ,too bad. Here is the on though. Fully TIG welded weighing in at 2.8lbs on each side. Has 8ft of weld, yes 8 feet. These are not your average fender brace. You will be required to drill the too holes into the frame for mounting. If interested please post up. I will give the following discounts for the first 3 orders.These will take about 3 weeks to make.
1. 30%
2. 18%
3. 8%
Edited 1 time(s). Last edited Saturday, January 23, 2010 3:43 PM
http://www.overkillengineeringmotorsports.com/
CAVY 2NV wrote:z yaaaa wrote:^^^^ check out the name!!! OVERKILLengineeringmotorsports!
k, thanks, move on.
OK now you want to follow my post and tell me to move on when I have nothing bad to say ...
well trust me I will send this thread to the old craper box also .. dont start it and their wont be any ,,,,OK
Sorry Mark for your friends comment... I hope this dont turn out like the motor post ..
I really dont want that. I think that your work on this is really nice ... Have a nice day
OEM wrote:OEM wrote:OK guys, a couple of you asked about 3 months ago for some fender braces and here they are. This is the drivers side. We figured that you will only need to see one side to know if you guys are interested. The drivers side has some type of box, that makes it sooo much harder to make. If the pass side fender is not the same then they should not be too ,too bad. Here is the on though. Fully TIG welded weighing in at 2.8lbs on each side. Has 8ft of weld, yes 8 feet. These are not your average fender brace. You will be required to drill the too holes into the frame for mounting. If interested please post up. I will give the following discounts for the first 3 orders.These will take about 3 weeks to make.
1. 30%
2. 18%
3. 8%
sorry missed it the first time.
FU Tuning
Quote:
mastin... when will you be selling your set? LOL