Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!! - Page 20 - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, August 18, 2011 8:54 PM
Will the list in this thread influence anything at all? I mean it doesn't make sense for someone that wasn't posted in the feeler to get dibs over somebody else that was... Either way I'll be checking constantly for the GP thread

Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 7:17 AM
hopefully your making a few extra? i'm on the list but way at the bottom.. i don't mind waiting my turn but would like to get a pair..



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 7:20 AM
The breakdown is

10 sets of 3/8 were made

and

60 sets of 1/2.

It's what I could afford to do in this batch. There is the possibility of more being done but at this time only these 70 sets are available on a first come first served basis.


Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 9:13 AM
i dont see a gp :p



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 9:38 AM
i am ready when you are and i have the cash in hand for the 1/2 inch pair.. say the word..



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 10:29 AM
steven burton wrote:

i am ready when you are and i have the cash in hand for the 1/2 inch pair.. say the word..

*same here for the 1/2 inch pair
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 10:40 AM
F5 is not fixing @!#$



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 10:43 AM
Try again

HIT F5





Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 1:01 PM
whats the final price with shipping to New Brunswick Canada?
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Friday, August 19, 2011 1:02 PM
Email me or PM me your info and I'll get a quote for you.


Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Saturday, August 20, 2011 4:03 PM
by when can we expect for these to be shipped out?




Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Saturday, August 20, 2011 5:25 PM
Has anyone found out on the rotors and being drilled for a proper 5x100?



>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----

Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Saturday, August 20, 2011 5:46 PM
If you really want I could make myself a template with the CNC machine and I could drill them at my home and charge about 50 bucks to drill a set. The template would make sure that the holes were perfect every time.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Sunday, August 21, 2011 10:48 AM
Your conversion Clear my Stock 15'' rim (13'' ID) ???


Boost Lover
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Sunday, August 21, 2011 10:59 AM
Yes they will.


Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Sunday, August 21, 2011 1:28 PM
I am taking it as no one has found a place for the proper hole rotors. I emailed a company to see if they will do a custom set up. So lets see.
Leafy,
Would you do a template out of metal, so one can take it to a drill press? What options would you have?
Jeffie,
Do you have any pics of both size spacers? I have a friend that is interested in one of these.



>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----

Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Sunday, August 21, 2011 1:39 PM
Yup, I have a pair of junk saturn rotors at my house. I'd likely just cut a 5x100 in it and weld locating pins in the 3 intact 4x100 holes. Then I'd drill the rotors out. I'd likely run it as, you buy rotors and have them shipped to my house and send me 50 bucks and your address, and I'd get them the next weekend I went home. Or I could find the price of them at my local parts store and you could pay me up front and I'd buy them.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Sunday, August 21, 2011 2:25 PM
Leafy (Club Jeffie FEA man) wrote:

Yup, I have a pair of junk saturn rotors at my house. I'd likely just cut a 5x100 in it and weld locating pins in the 3 intact 4x100 holes. Then I'd drill the rotors out. I'd likely run it as, you buy rotors and have them shipped to my house and send me 50 bucks and your address, and I'd get them the next weekend I went home. Or I could find the price of them at my local parts store and you could pay me up front and I'd buy them.


I would hope you dont think that 3 of the holes 4x100 line up in 5x100 pattern, Because only 1 lines up.






Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Sunday, August 21, 2011 2:35 PM
Exactly why I would use them to locate while I drill out the 4.5 holes.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Monday, August 22, 2011 8:11 AM
I know the stock Ebrake cable hook up on the Saturn Bracket Caliper but how works the Ebrake adjustement for the thightness of the cable ??? he have adjustement on the Saturn caliper or...


Boost Lover
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Monday, August 22, 2011 8:12 AM
Saturns adjust at the ebrake handle, or well at a coupling just behind the e-brand handle.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer

Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Monday, August 22, 2011 8:29 AM
The calipers also adjust themselves for wear, so every time you apply the parking brake, the caliper is adjusting itself for wear and slack in the cable. No ebrake cable adjustment needed to run this.




Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Monday, August 22, 2011 6:25 PM
50 bucks to drill 4 holes?

lmao



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Monday, August 22, 2011 6:54 PM
^^Its not just drilling 4 holes.. its like sayin $300 to just paint a bumper.. yep that is just easy.. its a service which equals labor and setting up time as well as providing experience and quality guarantee it will be done right.. Your more then welcome to drill your own, he is just offering it for those who can't don't want to risk it. I was talking to my machinist on getting some rotors and have him machine the holes being I trust his stuff to be more exact then me trying to do it.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Monday, August 22, 2011 7:14 PM
-Z Yaaaa- wrote:

50 bucks to drill 4 holes?

lmao


I considered going at 100 but then it would actually be cheaper to go to your local machinist. Honestly it'll take 15 minutes tops, I charge more than that as an idiot tax for not being able to do it yourself.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search