Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!! - Page 5 - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 4:06 AM
Sunfiretun3r wrote:

Curious question.

What's the benefit's of 3/8" bracket or 1/2" bracket? Better wheel offset with the 1/2"?


Just for wheel offsets, no benefits to either it's all personal preference. The majority of people choose the 1/2" but depends on your wheels and taste.


As for those rotors you guys are talking about, very nice find. I may consider them depending on costs and demand.

I want this swap to be an alternative to replacing drum parts. Why change drums when you can upgrade for close to the same cost after all



Want hub spacers or rear disk brackets? Shoot me a PM.




Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 4:27 AM
For those of you like me who looked at the parts needed and were confused why there are two brackets listed. To get the made by saturn bracket you just buy "semi-loaded" calipers, or get it from the junk yard. I'm almost certain that Jeffie is using it because the calipers are floating and using that stock part makes making sure the brakes actually work exponentially easier.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 4:30 AM
You are correct sir.


Want hub spacers or rear disk brackets? Shoot me a PM.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 5:26 AM
It makes sense to me, the stock Saturn caliper bracket positions the caliper correctly over the rotor, and the Jeffie bracket adapts the setup to our axle.

Now if a super awesome member would post the part numbers they've found for the Saturn stuff (OEM and/or aftermarket) needed, we'd all be very grateful....



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 6:20 AM
Parts list with numbers and prices based off O-Reilly's website. (Used them because that's the only place local to me in middle of nowhere MT)
O'reillys site

BrakeBest Select Rear rotor- Part # 56168RGS $26.99 (x2 one for left and right)
Cardone LEFT Rear Calipers with brackets, pads, and hardware kit- Part # : 16-4525 $131.99
Wagner RIGHT Rear Calipers with brackets, pads, and hardware kit- Part # : TQM25141 $129.99
BrakeBest Rubber hose line to Caliper- Part # : BH380102 $14.99 (x2 one for left and right)

Of course, this is a list for a stock setup option, you can go with aftermarket rotors and pads if wanted/ needed.

This is for the rotors that will have to be drilled to 5x100.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 7:04 AM
How well does the e-brake function work after this?

Will it still lock the rear tires to the point they will drag if the car starts moving?

I would love rear disks but I need an e-brake that can hold me in the burnout box.



If the ebrake works as good as it does with the drums then add my name to the list Mr. Jeffie and I will punch my brother in the junk on your behalf....hahaha





Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 7:06 AM
The e-brake will hold you fine my friend. Holds alot better then my damn SSBC rears do

Oh and hit him twice


Edited 1 time(s). Last edited Wednesday, June 15, 2011 7:07 AM

Want hub spacers or rear disk brackets? Shoot me a PM.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 7:40 AM
1. Evilution
2. Rich Grayo Jr.
3. Z's Z (bracket only)
4. Qwibby (Phil)
5. Philly D
6. Chris Posa - bracket only.
7. Roofy - I love Jeffie!!!!
8. Ryan Thompson
9. Chris Isaacs - 1/2"
10. Matt Sheridan - full kit
11. Jay Lundberg- full kit
12. LarryMartin830- bracket only
13. Tyler Wichers
14.MiNeS
15. Dustin Trimble 1/2" bracket only
16. HOTBUG1776
17. arrival_04_Eco
18. evan barnes
19. luisraul007 Complet kit!!
20. Roussseau9099 Complete kit
21. Dave Destefano.
21. Aznav bracket only.
22. -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23. scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24. Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25. Pj - in for the brackets only
26. Section8 - 1/2" bracket
27. newt





Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 8:53 AM
getting my parts for the swappers today hopefully. time to put another saturn on jackstands (at least this time is isnt for jeffie)



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 9:18 AM
I like putting scars on jackstands tho


Want hub spacers or rear disk brackets? Shoot me a PM.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 10:07 AM
So if you could find parts that's are not from the junk yard that would be an option for a full kit you will sell full kits?


gilligan

Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 11:28 AM
scott (section8cav) wrote:

if it doesnt bother you then dont worry about it.
those of us that it bothers will explore our options


exactly!



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 7:05 PM
1. Evilution
2. Rich Grayo Jr.
3. Z's Z (bracket only)
4. Qwibby (Phil)
5. Philly D
6. Chris Posa - bracket only.
7. Roofy - I love Jeffie!!!!
8. Ryan Thompson
9. Chris Isaacs - 1/2"
10. Matt Sheridan - full kit
11. Jay Lundberg- full kit
12. LarryMartin830- bracket only
13. Tyler Wichers
14.MiNeS
15. Dustin Trimble 1/2" bracket only
16. HOTBUG1776
17. arrival_04_Eco
18. evan barnes
19. luisraul007 Complet kit!!
20. Roussseau9099 Complete kit
21. Dave Destefano.
21. Aznav bracket only.
22. -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23. scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24. Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25. Pj - in for the brackets only
26. Section8 - 1/2" bracket
27. newt
28. cav93 (Alex) 1/2" bracket X2
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 7:05 PM
My calipers, rotors, and brake lines are already at my house.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 7:08 PM
Club Teh Jeffie wrote:

I like putting scars on jackstands tho

yeah too bad the only friggin s series with disc rear was teh one i took out for your tupperware hooptie..... ah well



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 7:37 PM
leafy- some dont want the ssbc or baer's because they dont want to add two ANCHOR'S to the back of their car's. those who have lifted said kits know exactly what i mean...

id still rather have an actual wilwood kit with billet calipers and two-piece rotors with aluminum centers but oh well... hell of a nice product, jeff. when was the last time you've seen a list of nearly 30 on here wanting something? @!#$ it, im sold.

1.) Evilution
2.) Rich Grayo Jr.
3.) Z's Z (bracket only)
4.) Qwibby (Phil)
5.) Philly D
6.) Chris Posa - bracket only.
7.) Roofy - I love Jeffie!!!!
8.) Ryan Thompson
9.) Chris Isaacs - 1/2"
10.) Matt Sheridan - full kit
11.) Jay Lundberg- full kit
12.) LarryMartin830- bracket only
13.) Tyler Wichers
14.) MiNeS
15.) Dustin Trimble 1/2" bracket only
16.) HOTBUG1776
17.) arrival_04_Eco
18.) evan barnes
19.) luisraul007 Complet kit!!
20.) Roussseau9099 Complete kit
21.) Dave Destefano.
21.) Aznav bracket only.
22.) -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23.) scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24.) Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25.) Pj - in for the brackets only
26.) Section8 - 1/2" bracket
27.) newt
28.) cav93 (Alex) 1/2" bracket X2
29.) Brad Wheeler (Z Yaaaa) - 1/2" -bracket only-






Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 11:03 PM
Forgot to add what I'm interested in...

1.) Evilution - 1/2" brackets and possibly rotors (depending what is offered)
2.) Rich Grayo Jr.
3.) Z's Z (bracket only)
4.) Qwibby (Phil)
5.) Philly D
6.) Chris Posa - bracket only.
7.) Roofy - I love Jeffie!!!!
8.) Ryan Thompson
9.) Chris Isaacs - 1/2"
10.) Matt Sheridan - full kit
11.) Jay Lundberg- full kit
12.) LarryMartin830- bracket only
13.) Tyler Wichers
14.) MiNeS
15.) Dustin Trimble 1/2" bracket only
16.) HOTBUG1776
17.) arrival_04_Eco
18.) evan barnes
19.) luisraul007 Complet kit!!
20.) Roussseau9099 Complete kit
21.) Dave Destefano.
21.) Aznav bracket only.
22.) -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23.) scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24.) Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25.) Pj - in for the brackets only
26.) Section8 - 1/2" bracket
27.) newt
28.) cav93 (Alex) 1/2" bracket X2
29.) Brad Wheeler (Z Yaaaa) - 1/2" -bracket only-






Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Wednesday, June 15, 2011 11:05 PM
hurry with this.. i need to change my rear brakes asap! lol



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, June 16, 2011 4:18 AM
UPDATE:

Quick update, I have more than 500 miles total on this setup. Only thing I can say is THANK GOD!!!!

I have not had a single problem out of this setup. Brakes work phenomenally, car feels totally different.

The parking brake holds just as tight as my drums, meaning it will drag the back tires if set tight.


EBC Makes brake pads for the 95-96 Grand Prix GTP in red stuff,green stuff and yellow stuff.

Rear Brake pads that interchange with saturn s-series rear disc brake pads:

5 vehicles
2000 - 2004
Lesabre Custom
V6 - 3.8L vin K 231ci - MFI GAS OHV
5 vehicles
2000 - 2004
Lesabre Limited
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
1999 - 2000
Park Avenue
V6 - 3.8L vin 1 231ci - MFI GAS OHV Super-charged
9 vehicles
1997 - 2005
Park Avenue
V6 - 3.8L vin K 231ci - MFI GAS OHV
7 vehicles
1997 - 2005*
Park Avenue Ultra
V6 - 3.8L vin 1 231ci - MFI GAS OHV Super-charged
3 vehicles
1994 - 1996
Regal Custom
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1996
Regal Custom
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
1994 - 1995
Regal Custom
V6 - 3.8L vin L 231ci - MFI GAS OHV
1 vehicles
1996
Regal Gran Sport
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
1994 - 1995
Regal Gran Sport
V6 - 3.8L vin L 231ci - MFI GAS OHV
1 vehicles
1996
Regal Limited
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
1994 - 1995
Regal Limited
V6 - 3.8L vin L 231ci - MFI GAS OHV
5 vehicles
1995 - 1999
Riviera
V6 - 3.8L vin 1 231ci - MFI GAS OHV Super-charged
3 vehicles
1995 - 1997
Riviera
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
1992 - 1993
Riviera
V6 - 3.8L vin L 231ci - MFI GAS OHV



2000
Lumina
V6 - 3.1L vin J 189ci - MFI GAS OHV
4 vehicles
1996 - 1999
Lumina
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1999
Lumina
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
1996 - 1997
Lumina LS
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1996
Lumina LS
V6 - 3.4L vin X 207ci - MFI GAS DOHC
2 vehicles
1997 - 1998
Lumina LTZ
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1997
Lumina LTZ
V6 - 3.4L vin X 207ci - MFI GAS DOHC
1 vehicles
1998
Lumina LTZ
V6 - 3.8L vin K 231ci - MFI GAS OHV
1 vehicles
1999
Monte Carlo
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1999
Monte Carlo
V6 - 3.8L vin K 231ci - MFI GAS OHV
3 vehicles
1996 - 1998
Monte Carlo LS
V6 - 3.1L vin M 189ci - MFI GAS OHV
2 vehicles
1996 - 1997
Monte Carlo Z34
V6 - 3.4L vin X 207ci - MFI GAS DOHC
1 vehicles
1998
Monte Carlo Z34
V6 - 3.8L vin K 231ci - MFI GAS OHV
Oldsmobile
26 vehicles2 vehicles
2001 - 2002
AuroraV6 - 3.5L vin H 214ci - MFI GAS DOHC
8 vehicles
1995 - 2003*
AuroraV8 - 4.0L vin C 244ci - MFI GAS DOHC
1 vehicles
1997
CutlassV6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1997
Cutlass GLSV6 - 3.1L vin M 189ci - MFI GAS OHV
3 vehicles
1994 - 1997*
Cutlass SupremeV6 - 3.1L vin M 189ci - MFI GAS OHV
2 vehicles
1994 - 1995
Cutlass SupremeV6 - 3.4L vin X 207ci - MFI GAS DOHC
1 vehicles
1994
Cutlass Supreme SV6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1994
Cutlass Supreme SV6 - 3.4L vin X 207ci - MFI GAS DOHC
3 vehicles
1995 - 1997
Cutlass Supreme SLV6 - 3.1L vin M 189ci - MFI GAS OHV
2 vehicles
1995 - 1996
Cutlass Supreme SLV6 - 3.4L vin X 207ci - MFI GAS DOHC
1 vehicles
1992
ToronadoV6 - 3.8L vin L 231ci - MFI GAS OHV
1 vehicles
1992
Toronado TrofeoV6 - 3.8L vin L 231ci - MFI GAS OHV

Pontiac
23 vehicles4 vehicles
2000 - 2003
BonnevilleV6 - 3.8L vin 1 231ci - MFI GAS OHV Super-charged
4 vehicles
2000 - 2003
BonnevilleV6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
2004 - 2005
Bonneville GXPV8 - 4.6L vin Y 281ci - MFI GAS DOHC
2 vehicles
2004 - 2005
Bonneville SEV6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
2004 - 2005
Bonneville SLEV6 - 3.8L vin K 231ci - MFI GAS OHV
1 vehicles
1996
Grand PrixV6 - 3.1L vin M 189ci - MFI GAS OHV
2 vehicles
1995 - 1996
Grand Prix GTV6 - 3.4L vin X 207ci - MFI GAS DOHC
2 vehicles
1995 - 1996
Grand Prix GTPV6 - 3.4L vin X 207ci - MFI GAS DOHC
3 vehicles
1994 - 1996
Grand Prix SEV6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1994
Grand Prix SEV6 - 3.4L vin X 207ci - MFI GAS DOHC


2001 - 2002
Aurora
V6 - 3.5L vin H 214ci - MFI GAS DOHC
8 vehicles
1995 - 2003*
Aurora
V8 - 4.0L vin C 244ci - MFI GAS DOHC
1 vehicles
1997
Cutlass
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1997
Cutlass GLS
V6 - 3.1L vin M 189ci - MFI GAS OHV
3 vehicles
1994 - 1997*
Cutlass Supreme
V6 - 3.1L vin M 189ci - MFI GAS OHV
2 vehicles
1994 - 1995
Cutlass Supreme
V6 - 3.4L vin X 207ci - MFI GAS DOHC
1 vehicles
1994
Cutlass Supreme S
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1994
Cutlass Supreme S
V6 - 3.4L vin X 207ci - MFI GAS DOHC
3 vehicles
1995 - 1997
Cutlass Supreme SL
V6 - 3.1L vin M 189ci - MFI GAS OHV
2 vehicles
1995 - 1996
Cutlass Supreme SL
V6 - 3.4L vin X 207ci - MFI GAS DOHC
1 vehicles
1992
Toronado
V6 - 3.8L vin L 231ci - MFI GAS OHV
1 vehicles
1992
Toronado Trofeo
V6 - 3.8L vin L 231ci - MFI GAS OHV



2000 - 2003
Bonneville
V6 - 3.8L vin 1 231ci - MFI GAS OHV Super-charged
4 vehicles
2000 - 2003
Bonneville
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
2004 - 2005
Bonneville GXP
V8 - 4.6L vin Y 281ci - MFI GAS DOHC
2 vehicles
2004 - 2005
Bonneville SE
V6 - 3.8L vin K 231ci - MFI GAS OHV
2 vehicles
2004 - 2005
Bonneville SLE
V6 - 3.8L vin K 231ci - MFI GAS OHV
1 vehicles
1996
Grand Prix
V6 - 3.1L vin M 189ci - MFI GAS OHV
2 vehicles
1995 - 1996
Grand Prix GT
V6 - 3.4L vin X 207ci - MFI GAS DOHC
2 vehicles
1995 - 1996
Grand Prix GTP
V6 - 3.4L vin X 207ci - MFI GAS DOHC
3 vehicles
1994 - 1996
Grand Prix SE
V6 - 3.1L vin M 189ci - MFI GAS OHV
1 vehicles
1994
Grand Prix SE
V6 - 3.4L vin X 207ci - MFI GAS DOHC



EBC Makes the Pads for the 95-96 Grand Prix.....so have fun




Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, June 16, 2011 4:25 AM
Forgot to add what I'm interested in...

1.) Evilution - 1/2" brackets and possibly rotors (depending what is offered)
2.) Rich Grayo Jr.
3.) Z's Z (bracket only)
4.) Qwibby (Phil)
5.) Philly D
6.) Chris Posa - bracket only.
7.) Roofy - I love Jeffie!!!!
8.) Ryan Thompson - 1/2" bracket only.
9.) Chris Isaacs - 1/2"
10.) Matt Sheridan - full kit
11.) Jay Lundberg- full kit
12.) LarryMartin830- bracket only
13.) Tyler Wichers
14.) MiNeS
15.) Dustin Trimble 1/2" bracket only
16.) HOTBUG1776
17.) arrival_04_Eco
18.) evan barnes
19.) luisraul007 Complet kit!!
20.) Roussseau9099 Complete kit
21.) Dave Destefano.
21.) Aznav bracket only.a
22.) -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23.) scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24.) Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25.) Pj - in for the brackets only
26.) Section8 - 1/2" bracket
27.) newt
28.) cav93 (Alex) 1/2" bracket X2
29.) Brad Wheeler (Z Yaaaa) - 1/2" -bracket only-
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, June 16, 2011 7:10 AM
Forgot to add what I'm interested in...

1.) Evilution - 1/2" brackets and possibly rotors (depending what is offered)
2.) Rich Grayo Jr.
3.) Z's Z (bracket only)
4.) Qwibby (Phil)
5.) Philly D
6.) Chris Posa - bracket only.
7.) Roofy - I love Jeffie!!!!
8.) Ryan Thompson - 1/2" bracket only.
9.) Chris Isaacs - 1/2"
10.) Matt Sheridan - full kit
11.) Jay Lundberg- full kit
12.) LarryMartin830- bracket only
13.) Tyler Wichers
14.) MiNeS
15.) Dustin Trimble 1/2" bracket only
16.) HOTBUG1776 - Complete kit
17.) arrival_04_Eco
18.) evan barnes
19.) luisraul007 Complet kit!!
20.) Roussseau9099 Complete kit
21.) Dave Destefano.
21.) Aznav bracket only.a
22.) -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23.) scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24.) Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25.) Pj - in for the brackets only
26.) Section8 - 1/2" bracket
27.) newt
28.) cav93 (Alex) 1/2" bracket X2
29.) Brad Wheeler (Z Yaaaa) - 1/2" -bracket only-




Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, June 16, 2011 7:23 AM
Forgot to add what I'm interested in...

1.) Evilution - 1/2" brackets and possibly rotors (depending what is offered)
2.) Rich Grayo Jr.
3.) Z's Z (bracket only)
4.) Qwibby (Phil)
5.) Philly D
6.) Chris Posa - bracket only.
7.) Roofy - I love Jeffie!!!!
8.) Ryan Thompson - 1/2" bracket only.
9.) Chris Isaacs - 1/2"
10.) Matt Sheridan - full kit
11.) Jay Lundberg- full kit
12.) LarryMartin830- bracket only
13.) Tyler Wichers
14.) MiNeS
15.) Dustin Trimble 1/2" bracket only
16.) HOTBUG1776 - Complete kit
17.) arrival_04_Eco
18.) evan barnes
19.) luisraul007 Complet kit!!
20.) Roussseau9099 Complete kit
21.) Dave Destefano.
21.) Aznav bracket only.a
22.) -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23.) scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24.) Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25.) Pj - in for the brackets only
26.) Section8 - 1/2" bracket
27.) newt
28.) cav93 (Alex) 1/2" bracket X2
29.) Brad Wheeler (Z Yaaaa) - 1/2" -bracket only-
30.) Brian Lorello - 1/2" -bracket only-
Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, June 16, 2011 7:42 AM
So what's the final price gonna be on the 1/2 bracket?



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, June 16, 2011 8:15 AM
I think i"m all good since I am teh official jeffie junk yard scrounger, but lets make it official.

1.) Evilution - 1/2" brackets and possibly rotors (depending what is offered)
2.) Rich Grayo Jr.
3.) Z's Z (bracket only)
4.) Qwibby (Phil)
5.) Philly D
6.) Chris Posa - bracket only.
7.) Roofy - I love Jeffie!!!!
8.) Ryan Thompson - 1/2" bracket only.
9.) Chris Isaacs - 1/2"
10.) Matt Sheridan - full kit
11.) Jay Lundberg- full kit
12.) LarryMartin830- bracket only
13.) Tyler Wichers
14.) MiNeS
15.) Dustin Trimble 1/2" bracket only
16.) HOTBUG1776 - Complete kit
17.) arrival_04_Eco
18.) evan barnes
19.) luisraul007 Complet kit!!
20.) Roussseau9099 Complete kit
21.) Dave Destefano.
21.) Aznav bracket only.a
22.) -MD- Michael Davis, 3/8" thick!...or I'll just machine it down to 3/8" from 1/2" if need be.
23.) scorpio1- bracket only or complete kit, depending on price, but bracket for sure!!
24.) Phil (Not QBE) In for the brackets, maybe just offer the rotors and plates as a package?
25.) Pj - in for the brackets only
26.) Section8 - 1/2" bracket
27.) newt
28.) cav93 (Alex) 1/2" bracket X2
29.) Brad Wheeler (Z Yaaaa) - 1/2" -bracket only
30.) Mike Demo Either size, damn sunken rear wheels.



Re: Rear Disc Brakes, Not another thread!!!!!! Club Jeffie FEELER!!!!
Thursday, June 16, 2011 2:41 PM
im in for a set of the 3/8"



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search