Camber/Caster Plates - Page 2 - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Camber/Caster Plates
Thursday, June 23, 2011 6:40 AM

Re: Camber/Caster Plates
Wednesday, July 20, 2011 5:34 PM
i sent u an email about getting a group purchase on these. Plus how many degrees do these adjust to?


Image
(write what ever comment you want here)
Re: Camber/Caster Plates
Wednesday, July 20, 2011 5:58 PM
He said one was comming.....hope its sooner then later
Re: Camber/Caster Plates
Wednesday, July 20, 2011 10:04 PM
Id be in for a GP if it truly is coming. Suspension upgrades are whats next for me.
Re: Camber/Caster Plates
Thursday, July 21, 2011 5:38 AM
Tomorrow I will post the ad in the GB section. Not sure how long it takes these days to get it up.

Mark


http://www.overkillengineeringmotorsports.com/
Re: Camber/Caster Plates
Thursday, July 21, 2011 6:27 AM
Just sent in for GB to start


http://www.overkillengineeringmotorsports.com/
Re: Camber/Caster Plates
Thursday, July 21, 2011 7:37 AM
They look good, would it be possible if we can get the mounting plates with Caster adjustment only? Or will they be Caster & Camber only?


"United by Individuality"
"If life is a joke, why aren't we laughing?"
"Normality depends on one's perception of reality."
http://www.cardomain.com/ride/3820803
Re: Camber/Caster Plates
Thursday, July 21, 2011 8:23 AM
Nope, Either Camber or Camber/Caster. Sorry

Mark


http://www.overkillengineeringmotorsports.com/
Re: Camber/Caster Plates
Thursday, July 21, 2011 2:58 PM
Pst, if you rotate a camber plate 90* it becomes a caster plate.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Camber/Caster Plates
Wednesday, August 10, 2011 4:18 PM
Leafy (Club Jeffie FEA man) wrote:Pst, if you rotate a camber plate 90* it becomes a caster plate.
lol
stupid.. ahhahahha but true!!


Image
(write what ever comment you want here)
Re: Camber/Caster Plates
Tuesday, October 18, 2011 8:15 PM
I saw that link on page one and looked it over they look good but not sure what i need i am stock right now but soon i am getting a set of eibach Pro-Kit Lowering Springs cause i only want to drop it 1.5 mabey a little more but not a hole 2 inch and i am going to get shocks to probly KBY adj unless some one knows of better shocks and struts and i wanted to do plates to and get it alig all at once help please
s

Re: Camber/Caster Plates
Wednesday, October 19, 2011 6:53 AM
If your only dropping roughly 1.5", an alignment shop should have no issues getting your car into factory specs. As far as struts go, search around on here, people as about it a couple times a week.


"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"

Re: Camber/Caster Plates
Wednesday, October 19, 2011 6:03 PM
K wasnt sure if the stock bolts would move it enough. I know i could get new bolts that would probly move it enough to get it right but i wanted to do it all myself then have a shop do the alignment. Thanks
Re: Camber/Caster Plates
Wednesday, October 19, 2011 9:14 PM
Aftermarket struts have a slightly slotted bolt hole that helps compensate for the lowering.


"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search