^^^ That would be it. Mine are 1/4" thick, 4" long with a 45° bend at the end.
How do you change the rear part of the e-brake lines? Ive tried in the past and have had issues.and couldnt seem to find the trick.
I don't really know of any trick, but when I had to replace one, I can tell you I fought with it a bit to get the old one out.
Count me in.
1.James Kellough (scorpio1) - 1set
2. Rob (kardain) - 1 set
3. seth (durandall05) - 1 set
4.Cory Zepp (Z'sZ) - 1 set
5. Kyle McHugh (glrd) - 1 set
6.Phil Duerr - 1 set
7. Mike Iwan (ekimnawi89) - 1 set
8. Mike Roof (roofy)
9. thaprowler - 1 set
10.
* * BIG FOR SALE POST * *
Count me in.
1.James Kellough (scorpio1) - 1set
2. Rob (kardain) - 1 set
3. seth (durandall05) - 1 set
4.Cory Zepp (Z'sZ) - 1 set
5. Kyle McHugh (glrd) - 1 set
6.Phil Duerr - 1 set
7. Mike Iwan (ekimnawi89) - 1 set
8. Mike Roof (roofy)
9. thaprowler - 1 set
10.DanC - 1 set.
Here's another technical question: What about brake proportioning? will it change? will us trackheads need to get proportioning valves?
'cuz if it doesn't change the front/rear brake bias, then it'd be kinda pointless....
1. James Kellough (scorpio1) - 1set
2. Rob (kardain) - 1 set
3. seth (durandall05) - 1 set
4. Cory Zepp (Z'sZ) - 1 set
5. Kyle McHugh (glrd) - 1 set
6. Phil Duerr - 1 set
7. Mike Iwan (ekimnawi89) - 1 set
8. Mike Roof (roofy)
9. thaprowler - 1 set
10. DanC - 1 set
11. Chelotus - 1 set
--------------------------
NCR-SCCA
According to the tracking, Brian should have his stuff today, and he's going to try to get it installed this weekend. Hopefully I'll get some feedback on it soon.
Stay tuned...
Watching this looks good so far
*****BLAME IT ON THE ALCOHOL*****
I'm mostly likely in for a set, but I'll wait til I know I have the cash available before adding to the list.
Stuff look greats, anxiously awaiting feedback from testing!
Nope. Still waiting on Brian to let me know when his are installed and how they're working out.
I might as well give an update since everyone thinks I'm bailing out or something. Im trying my best to make time. I work a full time job and a second job 20 hours a week so a lot of my weeknights are out of the questions. I work out of a blow through carport so like last night because of weather I had to call off the work because I wouldn't be able to get them on and troubleshoot before work in the morning. Im just not going to blow off a school sponsored internship because I screwed something up.
I didn't get the package until Monday this week. I was supposed to on Saturday but my mail man is an asshole a dropped it in my apartments office which I can't get into until Monday.
Im doing my best and I've tried to communicate this with Shawn and everyone whos contacted me personally about getting them installed. So have patience I won't disappoint.
Athese look great, I don't have the funds for them now but down the line I will, once turbo/forged eco are done, I'll contact you if the gp isnt up anymore.
Since they are fully milled to be made, would it be possible to make them hub centric?
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
DSMskyline wrote:Since they are fully milled to be made, would it be possible to make them hub centric?
If you mean centric to the axle, no. There is not enough room to put any kind of lip that would make a difference on there. They are centric to the hub base, though.
1. James Kellough (scorpio1) - 1set
2. Rob (kardain) - 1 set
3. seth (durandall05) - 1 set
4. Cory Zepp (Z'sZ) - 1 set
5. Kyle McHugh (glrd) - 1 set
6. Phil Duerr - 1 set
7. Mike Iwan (ekimnawi89) - 1 set
8. Mike Roof (roofy)
9. thaprowler - 1 set
10. DanC - 1 set
11. Chelotus - 1 set
12. Pj (daflyinskwirl) 2 sets
1. James Kellough (scorpio1) - 1set
2. Rob (kardain) - 1 set
3. seth (durandall05) - 1 set
4. Cory Zepp (Z'sZ) - 1 set
5. Kyle McHugh (glrd) - 1 set
6. Phil Duerr - 1 set
7. Mike Iwan (ekimnawi89) - 1 set
8. Mike Roof (roofy)
9. thaprowler - 1 set
10. DanC - 1 set
11. Chelotus - 1 set
12. Pj (daflyinskwirl) 2 sets
13. Matt (--Boosted Z--) - 1 set
So what calipers/rotors (year srt-4 or part numbers) are are needed with your brackets?
12.6 @ 114.6 MPH
Should be...
Calipers: saturn s series (just use 94 s sedan if buying new, or the rock auto part #'s i posted... They are inexpensive and no core charge)
Rotors: 95+ neon/srt-4 rear (they are the same rotor)
Philly D wrote:^^
Links please?
RA doesn't provide links to the individual products, but here's one to the main category
Calipers
CENTRIC Part # 14262550 More Info Reman; Posi-Quiet Loaded Caliper
Rear Disc brakes; Rear Left
CENTRIC Part # 14262549 More Info Reman; Posi-Quiet Loaded Caliper
Rear Disc brakes; Rear Right
$81.79 each (plus shipping)
The left side comes with the ebrake cable holder bracket (at least mine did).... the right side needs a cable holder bracket thingy.
Rotors, can get them just about anywhere.
1. James Kellough (scorpio1) - 1set
2. Rob (kardain) - 1 set
3. seth (durandall05) - 1 set
4. Cory Zepp (Z'sZ) - 1 set
5. Kyle McHugh (glrd) - 1 set
6. Phil Duerr - 1 set
7. Mike Iwan (ekimnawi89) - 1 set
8. Mike Roof (roofy)
9. thaprowler - 1 set
10. DanC - 1 set
11. Chelotus - 1 set
12. Pj (daflyinskwirl) 2 sets
13. Matt (--Boosted Z--) - 1 set
14. Matt (evilution) - 1 set
Just one clarification on the rotors: there is apparently a thicker rotor available, and I'm not sure which year or model it comes on, but when searching, I found a 12mm thick one and a 9mm thick one. The 9mm is the one Brian has, and the caliper fits it perfectly. I'm not sure if the 12mm will fit without too much friction with new pads, but it's possible. Someone asked me about them, but it was after I had sent out Brian's parts, so I couldn't see if there was enough room to push the cylinder back to accommodate the thicker rotor.
I may have to switch to this setup so I have e brake again. But I'm auto so we will see.
Hum.....very temping.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
1. James Kellough (scorpio1) - 1set
2. Rob (kardain) - 1 set
3. seth (durandall05) - 1 set
4. Cory Zepp (Z'sZ) - 1 set
5. Kyle McHugh (glrd) - 1 set
6. Phil Duerr - 1 set
7. Mike Iwan (ekimnawi89) - 1 set
8. Mike Roof (roofy)
9. thaprowler - 1 set
10. DanC - 1 set
11. Chelotus - 1 set
12. Pj (daflyinskwirl) 2 sets
13. Matt (--Boosted Z--) - 1 set
14. Matt (evilution) - 1 set
15. Kurt (kflo) - 1 set (looks like I showed up out of the blue at a good time!)
