whats is this part called? Where to get? - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
whats is this part called? Where to get?
Sunday, March 25, 2012 5:33 PM
What is this piece called that holds the rear strut to the axle, where can i get one?





2004 Turbo cavalier 11PSI and blown!

Re: whats is this part called? Where to get?
Sunday, March 25, 2012 5:39 PM
Umm....
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 5:43 PM
my thoughts exactly...



2004 Turbo cavalier 11PSI and blown!
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:04 PM
Junk yard exclusive!





________________________________________.
Still not low enough for a signature.

Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:13 PM
Twenty4z wrote:Junk yard exclusive!


yay.......



2004 Turbo cavalier 11PSI and blown!
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:20 PM
Maybe its because I'm on a cell phone, but I can't see what's wrong with it. Did you break it somehow?




Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!

Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:32 PM
Its actually bent and the bolt is seiezed to the metal cylinder that is in the center of the bushing for the strut it self. I guess ill be calling some junk yards in the morning.



2004 Turbo cavalier 11PSI and blown!
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:37 PM
I would try grabbing the nudging/sleeve with a vise grip/locking pliers, and try to back off the bolt with an impact gun
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:41 PM
Dave De Stefano wrote:I would try grabbing the nudging/sleeve with a vise grip/locking pliers, and try to back off the bolt with an impact gun


Not a bad idea, but what do i do about the actual piece being bent, the bolt won't line up?



2004 Turbo cavalier 11PSI and blown!
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:50 PM
is that a j or n body? looks too small to be a strut bushing. But yeah junk yard man.
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:52 PM
J body. Its the piece thats connected to the solid axle in the rear that holds the strut in place at the bottom.



2004 Turbo cavalier 11PSI and blown!

Re: whats is this part called? Where to get?
Sunday, March 25, 2012 6:53 PM
Bend it back? Worth a shot, right? Otherwise you gotta replace it anyway
Re: whats is this part called? Where to get?
Sunday, March 25, 2012 7:15 PM
Dave De Stefano wrote:Bend it back? Worth a shot, right? Otherwise you gotta replace it anyway


right



2004 Turbo cavalier 11PSI and blown!
Re: whats is this part called? Where to get?
Monday, March 26, 2012 5:48 AM
Re: whats is this part called? Where to get?
Monday, March 26, 2012 6:10 AM
www.gmpartsdirect.com (Rear Suspension) Strut Bracket
Re: whats is this part called? Where to get?
Monday, March 26, 2012 6:30 AM
01SilverFire wrote:www.gmpartsdirect.com (Rear Suspension) Strut Bracket


Not listed, i looked all morning!



2004 Turbo cavalier 11PSI and blown!
Re: whats is this part called? Where to get?
Tuesday, March 27, 2012 9:12 AM
Thanks, i ended up going to a junk yard and finding a halfway decent looking one for 10 bucks that i pulled. I tried using a air gun to get the bold out of this one and it still wouldn't come out. I have never seen the bolt seize up like that before. Either way its fixed now. Had no problems with the pass side.

Thanks for all the help guys!



2004 Turbo cavalier 11PSI and blown!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search