question about Eibach front sway bar - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
question about Eibach front sway bar
Sunday, January 13, 2013 7:58 PM
Hi every body ") When you installed the front sway bar did any body have any problems with the sway end being to close to cv boot? thanks for the info

Re: question about Eibach front sway bar
Monday, January 14, 2013 1:16 AM
Mine is close to the boot, but there is clearance. Sure it isnt upside down?






Re: question about Eibach front sway bar
Monday, January 14, 2013 5:02 AM
I remember on Darkstars install thread he said you had to cut off the corner of the end of the sway bar to make it not be so close to the cv boot.
Re: question about Eibach front sway bar
Monday, January 14, 2013 5:49 AM
Philly D wrote:

I remember on Darkstars install thread he said you had to cut off the corner of the end of the sway bar to make it not be so close to the cv boot.

I heard this as well.


"In Oldskool we trust"
Re: question about Eibach front sway bar
Monday, January 14, 2013 6:19 AM
I chopped mine to make sure it had clearance. Remember to put some paint on it when you cut.



Re: question about Eibach front sway bar
Monday, January 14, 2013 5:15 PM
Mine was till I read somewhere to swap the front links with the rear ones which were shorter. Something about they had them backwards in the kit.
Re: question about Eibach front sway bar
Monday, January 14, 2013 6:21 PM
Hmm, interesting.



Re: question about Eibach front sway bar
Monday, January 14, 2013 11:32 PM
I saw that on youtube about the bolts being switched. I plan on buying the front sway bar but where do i buy the rear bolts from? Is it the front and rear sway bar kit the bolt are mislabeled?
Re: question about Eibach front sway bar
Wednesday, January 23, 2013 1:23 AM
It's been years since I put my Addco swaybars on, but I seem to remember using shorter end links as well or either cutting down the spacer for the end link.





Re: question about Eibach front sway bar
Friday, January 25, 2013 9:02 AM
wouldnt changing the end link length change the effectivness of the bar though? it wouldnt have as much preload to it...



It's nice to be injected but I love being blown.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search